Inactive

The Army Contracting Command, Rock Island Contracting Center, is seeking to identify Potential Sources who have the capability to apply phenolic coating to Government-furnished parts, as follows: Requ... The Army Contracting Command, Rock Island Contracting Center, is seeking to identify Potential Sources who have the capability to apply phenolic coating to Government-furnished parts, as follows: Requirement: Application of Phenolic Coating to Government-supplied parts Description of Phenolic Coating Process All parts are to be cleaned per TT-C-490 Method II or III all over/Zinc Phosphate per MIL-DTL-16232 Type Z CL3 all over. Then apply one coat of phenolic baking varnish, Type II, MIL-DTL-12276E, to the inside surfaces only. Description of Government-furnished parts to be coated: Part Number 1: Disk with a diameter of 4.320” and a thickness of .156”, STEEL, SHEET, ASTM A109 TEMPER NO. 5. Part Number 2: Disk with a diameter of 3.974” and a thickness of .156” STEEL, SHEET, ASTM A109 TEMPER NO. 5. Part Number 3: Canister Assembly - diameter 4.495” x 4.945” with a tube welded in the center, steel, ASTM A1008 DS type B Part Number 4: Canister Assembly - diameter 4.250” x 3.911” with a tube welded in the center, steel, ASTM A1008 DS type B The following information is requested in response to this posting: *Company Name, Address, CAGE Code/DUNS Number * Brief synopsis of interest and capabilities * Point of contact to include name, title, phone number, and e-mail address Responses should be sent to Lorraine Geren, Lorraine.geren.civ@mail.mil and Cindy.k.wagoner.civ@mail.mil no later than October 4, 2021.