Inactive

*This notice has been extended to 23 February 2024. Notice ID: W51DQV24Z0007 DRAFT SOLICITATION The U.S. Army Corps of Engineers, Task Force Virgin Islands/Puerto Rico (VIPR) District, is issuing this... *This notice has been extended to 23 February 2024. Notice ID: W51DQV24Z0007 DRAFT SOLICITATION The U.S. Army Corps of Engineers, Task Force Virgin Islands/Puerto Rico (VIPR) District, is issuing this draft Solicitation for the Caño Martin Peña Ecosystem Restoration (CMP-ERP_ Contract 2, Western Bridges Scour Protection San Juan Puerto Rico. This is only a DRAFT Solicitation No. W51DQV24B0002. Project Description: The Caño Martin Peña Ecosystem Restoration Project includes the construction of an approximately 244 meters long paved channel in order to protect the foundations of the impacted bridges from scour associated with reestablishing flow through the Caño Martin Peña (to be completed as part of a later contract). The channel bottom and side slopes are to be constructed of riprap. The transition to the bulkhead-stabilized channel to the east (to be constructed as part of a later contract) requires construction of a bulkhead tie-back into the rip rap slope. Scour cutoff walls are required at the eastern and western ends of this project in order to prevent sedimentation of the paved channel. Prior to placement of the hardened structures, the channel will be excavated to remove sediment and debris. This work also includes, but is not limited to, clearing and grubbing, temporary construction crossings, material disposal areas, temporary traffic controls, demolition of abandoned structures, surface and ground water control, and all incidental related work. All work impacting public roads, and restricting public traffic is to comply with PRHTA Standard Specifications. Las Piedritas Site can be used as a staging area to place temporarily the excavated material. DO NOT SUBMIT A PROPOSAL in response to this DRAFT Solicitation. The purpose of this draft is to inform industry and to gather industry feedback prior to release of the final solicitation. All information received in response to this DRAFT Solicitation that is marked proprietary will be handled accordingly. The Government encourages comments/input from Industry regarding the requirements contained in this DRAFT solicitation. In preparation for the formal solicitation, please see the Draft Request for Proposal (RFP), draft plans and specifications attached. Interested parties are highly encouraged to review the Draft documents and submit any questions via ProjNet. We highly encourage interested parties to submit questions using ProjNet. Submitting questions early will provide additional time to answer your questions and respond prior to final solicitation. Technical inquiries and questions relating to this DRAFT solicitation are to be submitted via Bidder Inquiry in ProjNet at (https://www.projnet.org) No Later Than (NLT) February 23, 2024 at 2:00 PM, EST. To submit and review inquiry items, prospective vendors will need to use the Bidder Inquiry Key presented below and follow the instructions listed below the key for access. A prospective vendor who submits a comment /question will receive an acknowledgement of their comment/question via email, followed by an answer to the comment/question after it has been processed by our technical team. All timely questions and approved answers will be made available through ProjNet. The Bidder Inquiry Key is: KJFT7I-X82CIF Specific Instructions for ProjNet Bid Inquiry Access from ProjNet home page: 1. Identify the Agency. This should be marked as USACE. 2. Email. Enter the email address you would like to use for communication. 3. Key. Enter the Bidder Inquiry Key listed above. 4. Click Continue. A page will then open saying that a user account was not found and will ask you to create one using the provided form. 5. Enter your First Name, Last Name, Company, City, State, Phone, Email, Secret Question, Secret Answer, and Time Zone. Make sure to remember your Secret Question and Answer as they will be used from this point on to access the ProjNet system. 6. Click Add User. Once this is completed you are now registered within ProjNet and are currently logged into the system. Specific Instructions for Future ProjNet Bid Inquiry Access from ProjNet home page: 1. For future access to ProjNet, you will not be emailed any type of password. You will utilize your Secret Question and Secret Answer to log in. 2. Identify the Agency. This should be marked as USACE. 3. Email. Enter the email address you used to register previously in ProjNet. 4. Key. Enter the Bidder Inquiry Key listed above. 5. Click Continue. A page will then open asking you to enter the answer to your Secret Question. 6. Enter your Secret Answer and click Login. Once this is completed you are now logged into the system. Interested offerors shall provide feedback via the above website on this announcement NLT February 23, 2024 (2:00 p.m. Eastern Standard Time). DISCLAIMER: THIS REQUEST FOR PROPOSAL IS A DRAFT SOLICITATION ONLY. THE SOLE PURPOSE OF THIS NOTICE IS TO PROVIDE INFORMATION FOR CONTRACTOR TO REVIEW PRIOR TO ISSUANCE OF THE OFFICIAL SOLICITATION AND TO OBTAIN FEEDBACK AND QUESTIONS