Inactive

The 115th Fighter Wing at Dane County Regional Airport -Truax Field, Madison, WI intends to issue a Invitation for Bid to award a single firm fixed-price contract for services, non-personal, to provid... The 115th Fighter Wing at Dane County Regional Airport -Truax Field, Madison, WI intends to issue a Invitation for Bid to award a single firm fixed-price contract for services, non-personal, to provide all plant, labor, transportation, materials, tools, equipment, appliances and supervision necessary to alter an F-35 Aircraft Hangar. This project seeks to demolish 19,913 SF of hangar shop space and reconfigure this area for F-35 aircraft maintenance operations. These shop spaces will consist of lavatories, office space, break rooms, mechanical spaces and repair shops for “Wheel and Tire”, “Welding”, “Egress”, and “Structural”. Additionally, 19,803 SF of hangar space will be modified to accommodate F-35 aircraft. This will include, High Expansion Foam (HEF) fire suppression system modifications, aircraft make-up power and air systems, and lightning protection. Typical work includes, but is not limited to: mechanical systems, plumbing, waste water, electrical and technology systems. Strict adherence to construction plans and specifications is absolutely necessary to ensure compliance with F-35 Facilities Requirements Document. Any deviations in addition to the Government approving must independently be approved by Air Combat Command and Lockheed Martin. Asbestos removal in small amounts may also be required. Typical communications work includes, but is not be limited to, all cabling for the entire project. Typical security hardware work includes, but is not be limited to, the balanced magnetic switches, cameras, motion sensors, etc needed to secure the facility. All work will be in accordance with design requirements, specifications and drawings provided within the master specifications. This solicitation will result in a single construction contract for both demolition and new construction. OPTIONS: Options will be used for this project in addition to the previous work described. There will be a total of two (2) options. Options are as follows: Fire Protection Runoff Storage Perimeter Trench Infill & Slab BRAND NAME: This project requires a brand name specific product. A justification will be posted upon issuance of and attached to the solicitation. The brand name products included in this acquisition include the following: Advantor Security System, Andover Direct Digital Control, Marshall Best Security Corporations premium YB series keys and cores, and Monaco Enterprises, Inc radio transceiver. This project will be solicited as unrestricted. The HubZone preference in accordance with FAR 19.1307 applies. All responsible bidders are encouraged to participate. A Small Business Subcontracting Plan will be required if the bidder is a large business. The date for submittal of the Subcontracting Plan will be established in the Determination of Responsibility letter sent to the apparent low bidder after bid opening. The contract duration is 365 days from issuance of the Notice to Proceed. The North American Industry Classification (NAICS) Code is 236220, with a size standard of $39,500,000 average annual revenue for the previous three (3) years. The magnitude is between $10,000,000 and $25,000,000. Award will be made to the responsive and responsible lowest bidder. The tentative date for issuing the solicitation is anticipated in Febrary 2021. A pre-bid conference/site visit is anticipated to be held approximately 10 days after issuance of the solicitation and will be held at Truax Field, Madison, WI. Interested contractors are highly encouraged to attend and shall follow conference registration and Truax Field access requirements as provided in the solicitation. A site visit will immediately follow the pre-bid conference. The solicitation closing date will be scheduled for a minimum of 30 days after the date of the solicitation issuance. Actual dates and times will be identified in the solicitation. The bid opening will be conducted in accordance with FAR Subpart 14.4 and DFARS Subpart 214.4, Opening of Bids and Contract Award. Interested bidders must be registered in System for Award Management (SAM) at the time a bid is submitted. To register go to: https://www.sam.gov/. You will need your DUNS number, Taxpayer Identification Number (TIN), and banking information to register. Instructions for registering are on the SAM web page (there is no fee for registration). The solicitation and associated information and the plans and specifications will be available only from the beta.sam.gov website online at https://beta.sam.gov/. beta.sam.gov is a web-based dissemination tool designed to safeguard acquisition-related information for all Federal agencies. This solicitation is an invitation for bid and there will be a formal public bid opening. DISCLAIMER: The official plans and specifications are located on the official government webpage and the Government is not liable for information furnished by any other source. Amendments, if/when issued will be posted to https://beta.sam.gov/ for electronic downloading. This will normally be the only method of distributing amendments prior to closing; therefore, it is the bidder’s responsibility to check the website periodically for any amendments to the solicitation. Websites are occasionally inaccessible, due to various reasons. The Government is not responsible for any loss of Internet connectivity or for a bidders inability to access the documents posted on the referenced web pages. The Government will not issue paper copies. All inquiries must be in writing, preferable via email to the persons specified in the solicitation. All answers will be provided in writing via posting to the web.

Inactive

F-35 Alter Hangar 406 Category: Y-Construction of Structures and Facilities NAICS Code: 236220, Commercial and Institutional Building Construction Contract: 115th Fighter Wing, 3110 Mitchell Street, M... F-35 Alter Hangar 406 Category: Y-Construction of Structures and Facilities NAICS Code: 236220, Commercial and Institutional Building Construction Contract: 115th Fighter Wing, 3110 Mitchell Street, Madison, WI 53704, POC: SMSgt Katherine Pinnow Synopsis: F-35 ALTER HANGAR 406 The purpose of this synopsis is to gain knowledge of potential sources for this project including interested Small Business sources. This notice is for planning purposes only. No reimbursement will be made for any costs associated with providing information in response to this notice or any follow up information requests. All interested parties should respond. The 115th Fighter Wing intends to issue a solicitation and award of a contract to alter the F-35 Hangar 406. The magnitude of this project is between $10,000,000 and $25,000,000. All interested concerns will provide this office, in writing, a notice stating their positive intent to submit a proposal as a prime contractor no later than 01 August 2020. This notification, which shall not exceed five typewritten pages, must include (1) positive statement of intent to bid as a prime contractor, and (2) a completed and signed Source Sought Information Request Form and (3) a listing of projects completed during the past six years, both for government and private industry. The type of project, dollar value, contract number, location, and point of contact are to be included. Indicate if you were prime or subcontractor, and if subcontractor, provide the name and point of contact for the prime contractor. (4) a brief outline of resources, subcontractors, and key personnel that would be used to accomplish the contract. In the event adequate Small Business contractors are not available for adequate competition for this project, it may be advertised as unrestricted. Information shall be provided via email to: katherine.pinnow@us.af.mil. Include the following in the subject line-Sources Sought W50S9F-20-B-0001. No facsimile responses will be honored. PROGRAM DETAILS: The 115th Fighter Wing at Dane County Regional Airport -Truax Field, Madison, WI is conducting market research seeking capable sources for services, non-personal, to provide all plant, labor, transportation, materials, tools, equipment, appliances and supervision necessary to alter F-35 Hangar 406. This project seeks to demolish 19,913 SF of hangar shop space and reconfigure this area for F-35 aircraft maintenance operations. These shop spaces will consist of lavatories, office space, break rooms, mechanical spaces and repair shops for “Wheel and Tire”, “Welding”, “Egress” and “Structural”. Additionally, 19,803 SF of hangar space will be modified to accommodate F-35 aircraft. This will include High Expansion Foam (HEF) fire suppression system modifications, aircraft make-up power and air systems, and lightning protection. Typical work includes, but is not be limited to: mechanical systems, plumbing, waste water, electrical and technology systems. Strict adherence to construction plans and specifications is absolutely necessary to ensure compliance with the F-35 Facilities Requirements Document. Any deviations in addition to the Government approving must independently be approved by Air Combat Command and Lockheed Martin. Asbestos removal in small amounts may also be required. Typical Communications cables work includes, but is not to be limited to all cabling for the entire project. Typical Security Hardware work includes, but is not be limited to the balanced magnetic switches, cameras, motion sensors, etc needed to secure the facility. All work will be in accordance with design requirements, specifications and drawings provided within the master specifications. This solicitation will result in a single construction contract for both demolition and new construction.