Inactive Total Small Business Set-Aside (FAR 19.5)

MODIFICATION NOTICE: Bids are being solicited under solicitation number W50S9321R0025. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not... MODIFICATION NOTICE: Bids are being solicited under solicitation number W50S9321R0025. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation is issued as a Request for Quote (RFQ), unless otherwise indicated herein.If your company can provide the product/services listed on the solicitation and comply with all of the solicitation instructions, please respond to this notice. To view the specifications, please go to www.UnisonMarketplace.com and reference Buy No. 1079916_01. GSA Schedule Bids Only: Sellers bidding on this opportunity MUST have the items requested on an existing GSA Schedule. The Schedule must either be in the Seller's name or the Seller must be able to document its ability to act as an agent of a partner's Schedule. Sellers must not bid more than their applicable contract ceiling price, excluding the Unison Marketplace Fee, for contract-specific items. If Unison receives notice that, due to inclusion of the Unison Marketplace Fee, the Selected Bid's line item pricing is higher than the Selected Seller's applicable published government contract pricing, the Unison Marketplace Fee will be reduced to ensure the Selected Bid's line item pricing does not exceed the Selected Seller's applicable contract pricing. Sellers may offer Open Market items only in accordance with the approved Terms and Conditions of their respective GSA Schedule AND upon approval from the soliciting Contracting Officer. Information regarding GSA Schedules can be found at www.GSA.gov. This requirement is a Small Business Set-Aside and only qualified offerors may submit bids. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted, and, unless otherwise displayed at www.UnisonMarketplace.com, will end on: 2021-09-07 16:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be Muniz ANGB, PR 00979 The National Guard - Puerto Rico requires the following items, Brand Name or Equal, to the following: LI 001: Yanmar L70W Series Air Cooled Diesel Engine, EPA Certified, single Cylinder, Direct Injected, Naturally Aspirated System, Internally Balanced, Single Counter Rotating Balancer Shaft, Unit Mounted Air Filter, Enclosed Paper Element Type, Engine Mounted Fuel Tank With 3.06 Quarts Capacity, Automatic Bleeding Fuel System, Pressure and Splash Lubrication, Oil Capacity is 1.16 Quarts, Electric and Recoil Starting with Manual Decompression System, Engine Mounted Expansion Silencer With Heat Shield, 12 Volt Electrial System With 15 Amp Alternator W/Regulator Rotatable Exhaust Deflector, Variable Speed Throttle & Governor, Heavy Duty 17 CFM Max. Cast Iron 4 Cylinder Compressor, Rated at 125 P.S.I. Continuous 150 P.S.I Max; 17 Gal A.S.M.E. Certified Tank Reservoir Low Idle Throttle Feature, Heavy Duty AGM 35 Amp Hour Commercial Grade Battery,12 Volt Receptacle for accessories, Export Crated & Shrink Wrapped. Equipment must be similar in performance to the L70-17C125P17 diesel power air compressors., 2, EA; LI 002: Shipping, 2, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.UnisonMarketplace.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, National Guard - Puerto Rico intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. A Seller may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. National Guard - Puerto Rico is taking this action in an effort to improve both seller access and awareness of requests and the agency's ability to gather multiple, completed, real-time bids.All responsible Sellers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.UnisonMarketplace.com. There is no cost to register, review procurement data or make a bid on www.UnisonMarketplace.com.Sellers that are not currently registered to use www.UnisonMarketplace.com should proceed to www.UnisonMarketplace.com to complete their free registration. Sellers that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Sellers may not artificially manipulate the price of a transaction on www.UnisonMarketplace.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.UnisonMarketplace.com process or to collude with the intent or effect of hampering the competitive www.UnisonMarketplace.com process.Should Sellers require additional clarification, contact Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com. Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 120 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. This solicitation requires registration with the System for Award Management (SAM) in order to be considered for award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. Registration must be "ACTIVE" at the time of award. This buy is an all or none buy, offerors are expected to bid on all items otherwise offer shall not be considered. (a) Definitions. As used in this clause-- Commercially available off-the-shelf (COTS) item-- (i) Means any item of supply (including construction material) that is-- (A) A commercial item (as defined in paragraph (1) of the definition of ``commercial item'' in section 2.101 of the Federal Acquisition Regulation); (B) Sold in substantial quantities in the commercial marketplace; and (C) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and (ii) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products. Component means an article, material, or supply incorporated directly into an end product. Domestic end product means-- (i) An unmanufactured end product that has been mined or produced in the United States; or (ii) An end product manufactured in the United States if— (A) The cost of its qualifying country components and its components that are mined, produced, or manufactured in the United States exceeds 50 percent of the cost of all its components. The cost of components includes transportation costs to the place of incorporation into the end product and U.S. duty (whether or not a duty-free entry certificate is issued). Scrap generated, collected, and prepared for processing in the United States is considered domestic. A component is considered to have been mined, produced, or manufactured in the United States (regardless of its source in fact) if the end product in which it is incorporated is manufactured in the United States and the component is of a class or kind for which the Government has determined that-- (1) Sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or (2) It is inconsistent with the public interest to apply the restrictions of the Buy American statute; or (B) The end product is a COTS item. End product means those articles, materials, and supplies to be acquired under this contract for public use. Foreign end product means an end product other than a domestic end product. Qualifying country means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries: Australia, Austria, Belgium, Canada, Czech Republic, Denmark, Egypt, Finland, France, Germany, Greece, Israel, Italy, Luxembourg, Netherlands, Norway, Poland, Portugal, Spain, Sweden, Switzerland, Turkey, United Kingdom of Great Britain and Northern Ireland. Qualifying country component means a component mined, produced, or manufactured in a qualifying country. Qualifying country end product means-- (i) An unmanufactured end product mined or produced in a qualifying country; or (ii) An end product manufactured in a qualifying country if-- (A) The cost of the following types of components exceeds 50 percent of the cost of all its components: (1) Components mined, produced, or manufactured in a qualifying country. (2) Components mined, produced, or manufactured in the United States. (3) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or (B) The end product is a COTS item. United States means the 50 States, the District of Columbia, and outlying areas. (b) This clause implements, Buy American. In accordance with 41 U.S.C. 1907, the component test of the Buy American statute is waived for an end product that is a COTS item (see section 12.505(a)(1) of the Federal Acquisition Regulation). Unless otherwise specified, this clause applies to all line items in the contract. (c) The Contractor shall deliver only domestic end products unless, in its offer, it specified delivery of other end products in the Buy American--Balance of Payments Program Certificate provision of the solicitation. If the Contractor certified in its offer that it will deliver a qualifying country end product, the Contractor shall deliver a qualifying country end product or, at the Contractor's option, a domestic end product. (d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry. (End of clause)