Inactive Total Small Business Set-Aside (FAR 19.5)

This is a total small business set aside for a brand name only 3D printer with materials and accessories for the 163d Attack Wing at March Air Reserve Base in California utilizing Simplified Acquisiti... This is a total small business set aside for a brand name only 3D printer with materials and accessories for the 163d Attack Wing at March Air Reserve Base in California utilizing Simplified Acquisition Procedures. Stratasys F370 3D Fused Deposition Modeling (FDM) Printer Salient Characteristics • System must be new • Color LCD Monitor w/USB Port • Maximum Machine size: 34”W X 28”D X 64”H • Minimum printing/build envelope 14” X 10” X 14”. • Utilizes an enclosed build chamber with heat. Helps the materials form together which increases accuracy • Minimum of 4 material bays (2 model/ 2 support) • Capability to print/build layers in range from .005” - .013” for high resolution de-pending on material • Produce parts within an accuracy of ± .127 mm (± .005 in.) or ± .0015 mm/mm (± .0015 in/in), whichever is greater. • Soluble support structure system for steep angles or overhangs depending on material used during the build. • Includes ultrasonic system to remove soluble support structure after print-ing/build completion minimum chamber size must match minimum print/build envelope • Utilizes textured plastic build platforms to prevent part from lifting during the print process • Ability to print in solid fill, sparse high density, or sparse low density interior infill • Utilizes exchangeable extrusion tips in print head • Includes onboard calibration capability • Utilizes sealed material cartridges • Capable of printing the following materials: • ABS-M30 • ABS-M30I • ASA • PC-ISO • PC • PC-ABS • PLA • TPU • Includes licensed file processing software to operate to machine. • Contractor shall include training for the software for minimum of (4) individuals • Machine start-up to include assembling any components, testing, and opera-tional run as required by manufacturer. • PRINTER MINIMUM MATERIALS REQUIREMENTS: Includes standard material bundle with the following: Includes software license that enables: ABS-M30, ABS-M30i, PLA , ASA NAICS: 333244 FSC: 3610 The attached SF1449 shall be used in preparation of quotes. Quotes are due no later than 7 September 2021 at 1000 PST. All questions regarding this acquisition shall be directed to Aaron Lay via email at aaron.lay.2@us.af.mil.