Inactive Total Small Business Set-Aside (FAR 19.5)

25 July 2024 - Re-attached Amendment 3 Statement of Work. Previous version was not loading properly. 22 July 2024 - attached Amendment 3 Statement of Work and RFI Questions and Answers dated 22 July 2... 25 July 2024 - Re-attached Amendment 3 Statement of Work. Previous version was not loading properly. 22 July 2024 - attached Amendment 3 Statement of Work and RFI Questions and Answers dated 22 July 24 9 July 2024 - attached Amendment 2 Statement of Work, Questions and Answers, and L Shape Desk Drawing 3 July 2024 - Amendment 01 Statement of Work attached *A copy of this text is saved as attachment "W50S6Q24QAB01 SOLICITATION"* Best Value Trade-Off Using FAR 13.5 and FAR Part 12 Procedures This is a combined synopsis/solicitation for commercial supplies prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. The combined synopsis is issued as a Request for Proposal (RFP) under solicitation number: W50S6Q24QAB01. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC). Total Small Business Set-Aside: 100%; Applicable Size Standard is 1,100 Employees NAICS Code: 337214 – Office Furniture (Except Wood) Manufacturing Product or Service Code (PSC): 7110 – Office Furniture Posting Date: 27 June 2024 Response Date/Time: 29 July 2024 11:00 AM CST Contracting Office: 188th Wing Contracting, 4850 Leigh Ave, Fort Smith, Arkansas 72903-6018 Government Points of Contact: Contracting Officer: Mr. Samuel Bond samuel.bond.1@us.af.mil and Contract Specialist: MSgt Robin Swaim-Cherry robin.swaim-cherry@us.af.mil Line item number(s) and items, quantities, and units of measure: DESCRIPTION ESTIMATED QTY UNIT CLIN 0001 Furniture Components 1 Each CLIN 0002 Installation 1 Job CLIN 0003 Shipping 1 Each Description of requirements for the services to be acquired: The contractor shall provide, delivery and install all furniture components in building 102 at the 188th Wing, Fort Smith, AR, in accordance with the statement of work and the requirements within the floor drawing and list of furniture items. Date(s) and place(s) of delivery and acceptance and FOB point: Building 102; 4850 Leigh Ave, Fort Smith Arkansas 72903. Upon award of a purchase order or delivery order, the contractor shall deliver and install all furniture requirements within 120 days. A site visit is scheduled for 9 July 2024 at 11:00 a.m. CST. Interested parties shall notify the Contracting Officers by email, no later than 1:00 p.m. CST on 8 July 2024 if planning to attend. Include individual name, name of company, cell phone number. Visitors are subject to search of person and vehicle, and should arrive early enough to complete entry onto the base. All visitors will be escorted from the parking lot just inside the front gate. Gate access is at 4850 Leigh Avenue, Fort Smith, AR 72903. Funds are not presently available for this acquisition. No contract award will be made until appropriated funds are made available. Quotes with an acceptance period of less than 60 days shall not be considered. Provision 52.212-1, Instructions to Offerors-Commercial Products and Commercial Services, and addendum applies to this acquisition. Provision 52.212-2, Evaluation-Commercial Items and addendum applies to this acquisition Offerors shall include a completed copy of 52.212-3, Offeror Representations and Certifications-Commercial Products and Commercial Services with its proposal. FAR 52.212-4, Contract Terms and Conditions-Commercial Products and Commercial Services applies to this acquisition. FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Products and Commercial Services, applies to this acquisition. See clause below, in full text, for list of additional applicable clauses. Additional contract provisions and clauses are applicable and included below as necessary. Defense Priorities and Allocations Systems (DPAS) Rating: Not rated. 52.212-1 Instructions to Offerors-Commercial Products and Commercial Services (Nov 2021) (a) North American Industry Classification System (NAICS) code and small business size standard. The NAICS code(s) and small business size standard(s) for this acquisition appear elsewhere in the solicitation. However, the small business size standard for a concern that submits an offer , other than on a construction or service acquisition, but proposes to furnish an end item that it did not itself manufacture, process, or produce is 500 employees if the acquisition — (1)Is set aside for small business and has a value above the simplified acquisition threshold; (2)Uses the HUBZone price evaluation preference regardless of dollar value, unless the offeror waives the price evaluation preference; or (3)Is an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award regardless of dollar value. (b) Submission of offers. Submit signed and dated offers to the office specified in this solicitation at or before the exact time specified in this solicitation. Offers may be submitted on the SF 1449, letterhead stationery, or as otherwise specified in the solicitation. As a minimum, offers must show— (1) The solicitation number; (2) The time specified in the solicitation for receipt of offers; (3) The name, address, and telephone number of the offeror; (4) A technical description of the items being offered in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary; (5) Terms of any express warranty; (6) Price and any discount terms; (7) "Remit to" address, if different than mailing address; (8) A completed copy of the representations and certifications at Federal Acquisition Regulation (FAR) 52.212-3 (see FAR 52.212-3(b) for those representations and certifications that the offeror shall complete electronically); (9) Acknowledgment of Solicitation Amendments; (10) Past performance information , when included as an evaluation factor, to include recent and relevant contracts for the same or similar items and other references (including contract numbers, points of contact with telephone numbers and other relevant information ); and (11) If the offer is not submitted on the SF 1449, include a statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation. Offers that fail to furnish required representations or information, or reject the terms and conditions of the solicitation may be excluded from consideration. (c) Period for acceptance of offers. The offeror agrees to hold the prices in its offer firm for 30 calendar days from the date specified for receipt of offers, unless another time period is specified in an addendum to the solicitation. (d) Product samples. When required by the solicitation, product samples shall be submitted at or prior to the time specified for receipt of offers. Unless otherwise specified in this solicitation, these samples shall be submitted at no expense to the Government, and returned at the sender’s request and expense, unless they are destroyed during preaward testing. (e) Multiple offers. Offerors are encouraged to submit multiple offers presenting alternative terms and conditions, including alternative line items (provided that the alternative line items are consistent with FAR subpart 4.10), or alternative commercial products or commercial services for satisfying the requirements of this solicitation . Each offer submitted will be evaluated separately. (f) Late submissions, modifications, revisions, and withdrawals of offers. (1) Offerors are responsible for submitting offers, and any modifications, revisions, or withdrawals, so as to reach the Government office designated in the solicitation by the time specified in the solicitation. If no time is specified in the solicitation, the time for receipt is 4:30 p.m., local time, for the designated Government office on the date that offers or revisions are due. (2)(i) Any offer , modification, revision, or withdrawal of an offer received at the Government office designated in the solicitation after the exact time specified for receipt of offers is "late" and will not be considered unless it is received before award is made , the Contracting Officer determines that accepting the late offer would not unduly delay the acquisition ; and- (A) If it was transmitted through an electronic commerce method authorized by the solicitation , it was received at the initial point of entry to the Government infrastructure not later than 5:00 p.m. one working day prior to the date specified for receipt of offers; or (B) There is acceptable evidence to establish that it was received at the Government installation designated for receipt of offers and was under the Government’s control prior to the time set for receipt of offers; or (C) If this solicitation is a request for proposals, it was the only proposal received. (ii) However, a late modification of an otherwise successful offer, that makes its terms more favorable to the Government, will be considered at any time it is received and may be accepted. (3) Acceptable evidence to establish the time of receipt at the Government installation includes the time /date stamp of that installation on the offer wrapper, other documentary evidence of receipt maintained by the installation, or oral testimony or statements of Government personnel. (4) If an emergency or unanticipated event interrupts normal Government processes so that offers cannot be received at the Government office designated for receipt of offers by the exact time specified in the solicitation, and urgent Government requirements preclude amendment of the solicitation or other notice of an extension of the closing date, the time specified for receipt of offers will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume. (5) Offers may be withdrawn by written notice received at any time before the exact time set for receipt of offers. Oral offers in response to oral solicitations may be withdrawn orally. If the solicitation authorizes facsimile offers, offers may be withdrawn via facsimile received at any time before the exact time set for receipt of offers, subject to the conditions specified in the solicitation concerning facsimile offers. An offer may be withdrawn in person by an offeror or its authorized representative if, before the exact time set for receipt of offers, the identity of the person requesting withdrawal is established and the person signs a receipt for the offer. (g) Contract award (not applicable to Invitation for Bids). The Government intends to evaluate offers and award a contract without discussions with offerors. Therefore, the offeror’s initial offer should contain the offeror’s best terms from a price and technical standpoint. However, the Government reserves the right to conduct discussions if later determined by the Contracting Officer to be necessary. The Government may reject any or all offers if such action is in the public interest; accept other than the lowest offer; and waive informalities and minor irregularities in offers received. (h) Multiple awards. The Government may accept any item or group of items of an offer, unless the offeror qualifies the offer by specific limitations. Unless otherwise provided in the Schedule, offers may not be submitted for quantities less than those specified. The Government reserves the right to make an award on any item for a quantity less than the quantity offered, at the unit prices offered, unless the offeror specifies otherwise in the offer. (i) Availability of requirements documents cited in the solicitation. (1)(i) The GSA Index of Federal Specifications, Standards and Commercial Item Descriptions, FPMR Part 101-29, and copies of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained for a fee by submitting a request to- GSA Federal Supply Service Specifications Section Suite 8100 470 East L’Enfant Plaza, SW Washington, DC 20407 Telephone (202) 619-8925 Facsimile (202) 619-8978. (ii) If the General Services Administration, Department of Agriculture, or Department of Veterans Affairs issued this solicitation , a single copy of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained free of charge by submitting a request to the addressee in paragraph (i)(1)(i) of this provision. Additional copies will be issued for a fee. (2) Most unclassified Defense specifications and standards may be downloaded from the following ASSIST websites: (i) ASSIST (https://assist.dla.mil/online/start/). (ii) Quick Search (http://quicksearch.dla.mil/). (3) Documents not available from ASSIST may be ordered from the Department of Defense Single Stock Point (DoDSSP) by- (i) Using the ASSIST Shopping Wizard (https://assist.dla.mil/wizard/index.cfm); (ii) Phoning the DoDSSP Customer Service Desk (215) 697-2179, Mon-Fri, 0730 to 1600 EST; or (iii) Ordering from DoDSSP, Building 4, Section D, 700 Robbins Avenue, Philadelphia, PA 19111-5094, Telephone (215) 697-2667/2179, Facsimile (215) 697-1462. (4) Nongovernment (voluntary) standards must be obtained from the organization responsible for their preparation, publication, or maintenance. (j) Unique entity identifier. (Applies to all offers that exceed the micro-purchase threshold, and offers at or below the micro-purchase threshold if the solicitation requires the Contractor to be registered in the System for Award Management (SAM).) The Offeror shall enter, in the block with its name and address on the cover page of its offer, the annotation "Unique Entity Identifier" followed by the unique entity identifier that identifies the Offeror's name and address. The Offeror also shall enter its Electronic Funds Transfer (EFT) indicator, if applicable. The EFT indicator is a four-character suffix to the unique entity identifier. The suffix is assigned at the discretion of the Offeror to establish additional SAM records for identifying alternative EFT accounts (see FAR subpart 32.11) for the same entity. If the Offeror does not have a unique entity identifier, it should contact the entity designated at www.sam.gov for unique entity identifier establishment directly to obtain one. The Offeror should indicate that it is an offeror for a Government contract when contacting the entity designated at www.sam.gov for establishing the unique entity identifier. (k) [Reserved] (l) Debriefing. If a post-award debriefing is given to requesting offerors, the Government shall disclose the following information, if applicable: (1) The agency’s evaluation of the significant weak or deficient factors in the debriefed offeror’s offer. (2) The overall evaluated cost or price and technical rating of the successful and the debriefed offeror and past performance information on the debriefed offeror. (3) The overall ranking of all offerors, when any ranking was developed by the agency during source selection. (4) A summary of the rationale for award; (5) For acquisitions of commercial products, the make and model of the product to be delivered by the successful offeror. (6) Reasonable responses to relevant questions posed by the debriefed offeror as to whether source-selection procedures set forth in the solicitation , applicable regulations, and other applicable authorities were followed by the agency. (End of provision) ***Addendum to FAR 52.212-1*** PROPOSAL SUBMISSION INSTRUCTIONS Submission Due Date. The offeror must ensure its proposal, in its entirety, reaches the required destination before the date and time set for closing of the solicitation. The submission due date for this solicitation is 29 July 2024 at 11:00 AM central standard time. Late Proposals. The lateness rules for submitted proposals are outlined in FAR 52.212-1 "Instructions to Offerors-Commercial Products and Commercial Services," and are incorporated into this solicitation. Submission. The proposal submitted in response to this solicitation shall be formatted as stated below and furnished electronically to the Contracting Officer (KO), Sam Bond, samuel.bond.1@us.af.mil and the Contract Specialist (CS), MSgt Robin Swaim-Cherry, robin.swaim-cherry@us.af.mil. The proposal shall only be submitted as described. Proposal Compliance. The Government must have received from the offeror a fully compliant proposal. The proposal is compliant when it conforms to all of the requirements, terms, and conditions of the solicitation, including the Statement of Work (SOW). Proposal Acceptance. The contractor shall make a clear statement in the proposal as to the expiration date of the proposal and the stated expiration date shall be valid for all proposed subcontractors as well. FAR 52.212-1(c) is hereby tailored for this solicitation: The contractor shall specify a proposal acceptance period in the Proposal Summary of not less than 60 days from the date of the solicitation closing. This date may be extended by mutual agreement. Proposal Retention. In accordance with FAR Subpart 4.8, Government Contract Files, the Government will retain one copy of all unsuccessful proposals. Single Proposal Submission. FAR 52.212-1 is hereby tailored to remove subparagraph (e), which does not apply to this solicitation Offerors are limited to submitting one proposal with one approach to meeting all the requirements of this solicitation. Proposals that contain alternative terms and conditions will be considered as taking exception to the requirements of the solicitation. Optional Proprietary and Restrictive Markings Mark the title page with the following legend: “This proposal includes data that shall not be disclosed outside the Government and shall not be duplicated, used, or disclosed -- in whole or in part -- for any purpose other than to evaluate this proposal. If, however, a contract is awarded to this offeror as a result of -- or in connection with -- the submission of this data, the Government shall have the right to duplicate, use, or disclose the data to the extent provided in the resulting contract. This restriction does not limit the Government’s right to use information contained in this data if it is obtained from another source without restriction. The data subject to this restriction are contained in sheets [offeror shall insert numbers or other identification of sheets]” and Mark each sheet of data it wishes to restrict with the following legend: “Use or disclosure of data contained on this sheet is subject to the restriction on the title page of this proposal.” PROPOSAL FORMAT This section provides guidance to the offeror for preparing a proposal in response to the solicitation. The offeror’s proposal shall include all data and information required by this solicitation and submitted in accordance with these instructions. Any contract resulting from this effort shall be required to meet United States Government regulations and statutory requirements. In addition, the offeror is expected to ensure compliance with all laws, regulations, standards, and any other constraints specifically identified in the solicitation. The proposal submitted in response to the solicitation shall be formatted as stated below and furnished as stated herein. The acceptable electronic formats for proposals shall be compatible with MS Office, specifically MS Word and MS Excel; PDF format is acceptable also. Minimum type size shall be 10 point. All proposal volumes shall be labeled with the solicitation number (W50S6Q24QAB01), as well as the name, address, and telephone number of the Offeror. All volumes shall be electronic files and not be password protected. Offerors shall scan all files for computer viruses prior to submission to the Government. PROPOSAL CONTENT AND ORGANIZATION The offeror shall prepare the proposal as set forth in Table 1, Proposal Organization Table and Table 2, Proposal file Name Matrix. The completion and submission to the Government of documents identified in Table 1, Proposal Organization Table, shall constitute an offer and shall indicate the offeror’s unconditional consent to the terms and conditions of the solicitation. The proposal shall not contain citations for, or active links to live Internet sites or pages. All linked information shall be contained within the electronic proposal. Any linked information that is not contained in the proposal will not be accepted. Each volume shall be written or presented on a standalone basis. Information required for proposal evaluation that is not found in its designated volume or presentation will be assumed to have been omitted from the proposal and will not be considered. Pages that exceed the required page limitations set forth in Table 1, Proposal Organization Table, will not be evaluated by the Government. A cover page, table of contents, and acronym list shall be included in each volume and will not be included in any applicable page limits. TABLE 1 PROPOSAL/QUOTE ORGANIZATION TABLE VOLUME SECTION TITLE COPIES PAGE LIMIT 1 Proposal Summary – Not Evaluated Organizational Conflict of Interest (OCI) – Not Evaluated 1 – electronic Unlimited 2 Factor 1: Technical Capability 1 – electronic 20 pages max 3 Factor 2: Past Performance 1 – electronic Up to 2 pages per reference; not to exceed 6 pages (Past performance, PWS, and SOWs do not count towards the page limit) 4 Factor 3: Price Proposal 1 – electronic Unlimited All electronic files must be submitted using the file names in Table 2, Proposal File Name matrix, below. TABLE 2 PROPOSAL FILE NAME MATRIX Volume Volume Name File Name Contents 1 Proposal Summary (Offeror Name) – Proposal/Quote Summary Offeror’s Proposal Summary 2 Technical Capability (Offeror Name) – Technical Capability Offeror’s Technical Capability 3 Past Performance (Offeror Name) – Past Performance Offeror’s Past Performance 4 Price Proposal (Offeror Name) – Price Proposal Offeror’s Price Proposal PROPOSAL DOCUMENTS Proposals shall be clear and concise and include sufficient detail for effective evaluation. The offeror shall not simply rephrase or restate the Government’s requirements but shall provide convincing rational to address how the offeror intends to meet those requirements. The offeror should assume the Government has no prior knowledge of its capabilities and experience. The Government will base its evaluation on the information presented in the offeror’s proposal in response to this solicitation, except as stated in the past performance evaluation section. Proposals shall be structured in accordance with the Contract Line Item Number (CLIN) structure set forth in the solicitation. PROPOSAL= SUMMARY, Volume 1, shall include: Solicitation No. W50S6Q24QAB01 Date submitted Offeror’s name Offeror’s address, CAGE code, and DUNs Offeror contact information for proposal POC(s) All proposed subcontractor(s) (as applicable) Address, CAGE code, and DUNs for each proposed subcontractor Proposal Acceptance Period OCI Plan or negative affirmation Signature Actions/offeror Fill-Ins. Offerors shall submit a copy of all completed fill-ins for provisions and clauses requiring contractor provided information, and (if applicable) a signed copy of all amendments to the solicitation. System for Award Management (SAM) certifications need not be separately submitted; however, all offerors must be successfully registered and valid in SAM prior to award Where certifications and approved systems are required for an offeror, if the proposal is being submitted by a Joint Venture, certifications and approved systems for the principals (partners) of the joint venture will be considered as valid for that offeror providing the necessary documentation from all principals (partners) is provided with the proposal. Joint Venture (JV): To be recognized as a JV and eligible for award, the membership arrangements of the JV must be identified and the company relationships fully disclosed in the offeror's proposal IAW FAR 9.603. A copy of the agreement establishing the JV must contain the signatures of all of the members comprising the JV. Statement of Acknowledgement. A statement specifying the extent of agreement with all terms, conditions, and provisions of the RFP, and a statement of agreement to furnish and deliver the supplies or perform services set forth in the RFP in consideration for offeror’s proposed price(s) set opposite each supply. Any exceptions taken to the attachments, exhibits, enclosures, or other solicitation terms, conditions, or documents may be grounds for the Contracting Officer to reject the proposal from further consideration in the source selection process. Assumptions. The offeror shall consolidate and identify all offeror's generated "assumptions" contained anywhere in the proposal. Also, the offeror shall include a statement that none of the "assumptions" contradict or take exception to any terms, conditions, or requirements of the solicitation. Any exceptions taken to the attachments, exhibits, enclosures, or other solicitation terms, conditions, or documents may be grounds for the KO to reject the proposal from further consideration in the source selection process. TECHNICAL CAPABILITY, Volume 2, shall include: The Technical Capability section of the proposal shall present relevant information articulating the offeror’s proposed approach to meeting the SOW requirements. This section shall clearly demonstrate the offeror’s understanding by providing a clear description of the proposed approach to performing the work. The offeror’s description should include a clear description of all processes and procedures employed. Offerors shall provide relevant experience (for this purpose, experience refers to what an offeror has done, not how well it was accomplished) in performing proposed processes and procedures. This section shall not include any pricing data. The offeror’s proposal/quote information will be evaluated to assess the risk that the offeror will timely meet contract requirements. PAST PERFORMANCE, Volume 3, shall include: The offeror shall submit information for a total of up to three years (no more than 5) of recent contract past performance references that were performed by the offeror as the prime contractor, which the offeror considers to have relevance. These may include foreign, federal, state, local and private industry contracts. While the Government may elect to consider data obtained from internal and external sources other than the proposal, the burden of providing thorough and complete past performance information remains with the offeror. It is the offeror's responsibility to submit detailed and complete information so the Government may evaluate its Past Performance. The Government does not assume the duty to search for data to cure problems it finds in proposals. The below instructions are provided to advise offerors as to the information required by the Government to assess the contractor's Recent and Relevant past performance. Since this information constitutes a basis of the Government's review, it is imperative that the offeror present its past performance in a clear and complete manner. Failure to provide the information requested below may result in an assessment that the offeror does not possess a record of Recent and Relevant past performance. Recent contracts are those performed within three years of the date of issuance of this solicitation. Relevant contracts are those comparable in scope and magnitude of effort and complexity to the SOW requirement(s). Contract Information: The offeror's proposal shall substantiate what distinct effort was required and actually performed under each of the contract(s) included in the proposal. For each Contract(s) submitted, provide the following information: Prime Contractor name and address; Contract Number (and delivery/contract number if applicable); Total Value of the Contract (beginning & ending value); Delivery or Performance Schedule; Contract period of performance; Government or private industry contracting activity address, telephone number and e-mail; Provide a description of the work performed by the offeror, which shall include a narrative describing the similarities between (1) the relevant work performed under the SOW requirements of the offeror's cited contract(s) and (2) the SOW requirements identified in paragraph 5. In its narrative, the offeror shall specify the location in the cited contract SOW (to include paragraph and page number) Provide a brief self-assessment of contract performance. The offeror may also be evaluated based on other internal Government or private source information. The Government may utilize the Contract Performance and Rating System (CPARS) to search for recent and relevant offeror performance and ratings. The Government will conduct an in-depth evaluation of all recent performance information to determine how closely the services performed under those contracts relate to the management and technical requirement(s). Consideration will be given to similar service, similar complexity of the effort, breadth and depth of skills, similar contract scope and type, and schedule. In addition, consideration will be given to any quality awards or certifications that indicate the offeror has a high-quality process for developing and producing the products or services required by this acquisition. The offeror may provide a copy of its most recent CPARS evaluation, if applicable, showing the overall rating(s) for each of the past performance references provided in the proposal. Past Performance Questionnaire. A past performance questionnaire is provided in “Attachment 1 – Performance Assessment Questionnaire”. For each contract submitted by the offeror, the offeror shall send a copy of the past performance questionnaire directly to the appropriate contracting activity and technical representative responsible for the past/current contract. The offeror shall request that these individuals complete the questionnaire and forward it electronically directly to the Government at samuel.bond.1@us.af.mil and robin.swaim-cherry@us.af.mil as soon as possible and prior to the solicitation closing date with the subject heading “PAST PERFORMANCE INFORMATION FOR W50S6Q24QAB01 [Offeror name]. PRICE, Volume 4, shall include: Price Proposal Format. MS Excel, MS Word, or Adobe PDF. Supporting narrative, including Basis of Estimate (BOE) sheets, shall be provided in files that are of the same file type as 8.1.1. Under no circumstances is price information and documentation to be included elsewhere in the proposal. The price proposal shall contain: The offeror shall submit data substantiating the price proposed to complete the requirements identified in the solicitation. The offeror’s price proposal shall contain sufficient factual information to establish that the proposed price is reasonable and complete. The offeror shall submit a narrative BOE to substantiate the price proposal. The offeror shall provide the total price for each CLIN in the solicitation. Include a complete list of all categories and the direct hourly rate for each labor category, if applicable. Subcontractor Price Submission. Subcontractor price proposal information should be submitted and included as part of the prime offeror’s proposal submission. In the event that a subcontractor declines to provide complete price proposal/quote to the offeror, that subcontractor’s proposal information may be submitted by the subcontractor directly to the Government using the same submission instructions noted above. Such submissions shall arrive at or prior to the due date for proposals/quotes noted on the front page of this solicitation. Reserved In accordance with FAR 13.106-3(a), in addition to the information reque...