Inactive Total Small Business Set-Aside (FAR 19.5)

Brand Name-No Substitute – Two (2) Thermion Precision Arc 4.8, Model 71000-4.8; Precision Arc Gen III set up for 3/16” wire size, feeder assembly 4.8, front end -3/16 PA Custom length, control cable a... Brand Name-No Substitute – Two (2) Thermion Precision Arc 4.8, Model 71000-4.8; Precision Arc Gen III set up for 3/16” wire size, feeder assembly 4.8, front end -3/16 PA Custom length, control cable and power leads 50’ package, power cable assembly, Power/Control Lead 650 Amp Multi-voltage input Power Supply with Running Gear Tool Kit front end leads: Custom length, control box miller assembly, tool kit, DeltaWeld 652 w/running gear, precision: wire drum dispenser. Capable of spraying 3/16” zinc/aluminum (85/15) alloy material, 85 ZINC/15 ALUMINUM 136 LBS/62 KGS (431 FT2 @10MILS), deposit efficiency: (70%), Air consumption: 90-110 PSI at 60 CFM, ½” IPS connection, 6 roll power drive, emergency stop(s), hardened feed rolls (Rc60), sealed bearing inlet guides, automatic wire tensioning, sealed amphenol fittings, direct connect electrical connections, all aluminum frame, digital meters, sealed feed roll bearings. Power source: 480V, 3 Phase. Must be equipped with wire straightening, wire feed jog switch (downstream side), and meter at the feeder, arc shorting control and modular construction, whereas each component and sub-component has quick release plugging for quick maintenance and component swapping. Standard Control Box and Industrial cart are to be removed. Brand Name-No Substitute: 2 each: Precision Wire Drum Dispenser, Model 541000 for Thermion Precision Arc 4.8 Above. Brand Name-No Substitute: 2 each; Spraymaster: Control panels and electronics cabinet combined, Model 53097R1-CP/EC. Welders are to be controlled independent of each other for Thermion Precision Arc 4.8 Above. DETAILED DESCRIPTION REQUIRED PRIOR TO AWARD: The MCAAP Engineering Support Division will validate and verify/approve the contractor’s listed equipment concept before award is granted. In order to meet this review requirement, the offeror shall submit with their proposal a detailed technical description of the thermal arc system. The offeror’s description submittal shall account for each one of the required product features located in this qualifying statement. Submittal line items shall be in the same order as the required features in the qualifying statement. Conceptual drawings that are not detail “as built” drawings are recommended but not required for submittal with the detailed description. Approval drawing(s) is/are requested. 3D models requested, can be in native Solidworks format, IGES, and/or STEP within two weeks after award.