Inactive Total Small Business Set-Aside (FAR 19.5)

THIS IS A PRE-SOLICITATION NOTICE, OTHERWISE KNOWN AS A SYNOPSIS (SUMMARY). THE SOLICITATION PERTAINING TO THIS NOTICE WILL NOT BE AVAILABLE UNTIL APPROXIMATELY 15 DAYS FROM THE DATE OF THIS NOTICE. T... THIS IS A PRE-SOLICITATION NOTICE, OTHERWISE KNOWN AS A SYNOPSIS (SUMMARY). THE SOLICITATION PERTAINING TO THIS NOTICE WILL NOT BE AVAILABLE UNTIL APPROXIMATELY 15 DAYS FROM THE DATE OF THIS NOTICE. The Army Contracting Command Redstone has a requirement for the acquisition of: 4 sets of mix-in-case, RAM rocket motor hardware Additionally, this equipment must meet the requirements stated below: APPLICABLE STANDARDS/SPECIFICATIONS: INTERPRET DRAWING IAW ASME Y14.100-2017. DIMENSIONING AND TOLERANCING IAW ASME Y14.5-2009. ITEM IDENTIFICATION: IDENTIFY IAW MIL-STD-130. METHOD: RUBBER STAMP WITH .13 IN HIGH CHARACTERS USING CONTRASTING COLOR INK (PN AA56032-IIIWHT OR AA56032- IIIBLK) IAW A-A-56032. LOCATE APPROXIMATELY AS SHOWN. AT A MINIMUM PART MARK AS FOLLOWS: 47UM3-PLD10103-XXX-REV - (-XXX INDICATES APPLICABLE PART NUMBER) MFR-MFR CAGE CODE (IF DIFFERENT FROM DESIGN ACTIVITY) MATERIAL: 6061-T6 ALUMINUM IAW ASTM B221. 4. REMOVE ALL BURRS AND BREAK SHARP EDGES. UNLESS OTHERWISE SPECIFIED, SURFACE ROUGHNESS SHALL NOT EXCEED 125 ? IN Ra PER ASME B46.1 ON ALL MACHINED SURFACES. UNLESS OTHERWISE SPECIFIED, ALL INTERNAL RADII ARE .50 Solicitation number W31P4Q-24-Q-0012 is to be a firm fixed price acquisition, in accordance with FAR Part 13.106-1(b)(1). The corresponding NAICS code for this procurement is 332710. CLIN 0001 will be issued for four(4) sets of mix-in-case, RAM rocket motor hardware. All responsible concerns may submit a quotation which shall be considered by the agency. Contract award is anticipated on or about 1 August 2024. Oral communications are not acceptable in response to this notice. Email response is the method of transmission; point of contact for further information is Jimmy Creech, email: jimmy.w.creech.civ@army.mil.

Inactive Total Small Business Set-Aside (FAR 19.5)

4 sets of mix-in-case, RAM rocket motor hardware **The contractor shall be approved to handle ITAR drawings and hardware and show documentation of that approval. **The contractor shall be in complianc... 4 sets of mix-in-case, RAM rocket motor hardware **The contractor shall be approved to handle ITAR drawings and hardware and show documentation of that approval. **The contractor shall be in compliance with DFARS 252.204-7020 SPRS. **The contractor shall be able to machine parts out of 6061-T6 ALUMINUM IAW ASTM B221,B209; POLYETHERETHERKETONE (PEEK) POLYMER 450G; 316/316L STAINLESS STEEL IAW ASTM A240/A240M OR ASTM A276/A276M per drawing requirements. THREADS SHALL BE IAW ASME B1.1 **The contractor shall be able to meet tolerances for each part. Drawings similar to other parts in the package are provided for reference. UNLESS OTHERWISE SPECIFIED, SURFACE ROUGHNESS SHALL NOT EXCEED 125 ? IN Ra PER ASME B46.1 ON ALL MACHINED SURFACES. **The contractor shall make 4 sets of parts each set containing fifteen pieces (total of 60 parts). ITEM IDENTIFICATION: IDENTIFY IAW MIL-STD-130. METHOD: RUBBER STAMP WITH .13 IN HIGH CHARACTERS USING CONTRASTING COLOR INK The expected PoP shall be 16 weeks post award.”