Inactive Total Small Business Set-Aside (FAR 19.5)

4-18-23 AMENDMENT 0002 WAS ADDED - RFI QUESTIONS AND ANSWERS 5-14 4-11-23 AMENDMENT 0001 WAS ADDED - RFI QUESTIONS AND ANSWERS 1-4 PLEASE SEE STATEMENT OF WORK (SOW) FOR A FULL AND DETAILED DISCRIPTIO... 4-18-23 AMENDMENT 0002 WAS ADDED - RFI QUESTIONS AND ANSWERS 5-14 4-11-23 AMENDMENT 0001 WAS ADDED - RFI QUESTIONS AND ANSWERS 1-4 PLEASE SEE STATEMENT OF WORK (SOW) FOR A FULL AND DETAILED DISCRIPTION OF THE REQUIREMENT. This requirement is for the turn-key design, supply, delivery, off-loading, transporting, locating, installation, cleaning, assembly, set-up and training for one each Computer Numerical Controlled (CNC) Horizontal Machining Center at Tobyhanna Army Depot (TYAD) in Tobyhanna, PA 18466. The Contractor shall supply all materials, supplies, freight, delivery, tools, equipment, consumables, labor, and supervision for the turn-key design, supply, delivery, off-loading, transporting, locating, installation, cleaning, assembly, set-up and training for the machine. The Contractor shall also disconnect an existing machining center and transport it to an outdoor location on site. The Contractor will also be responsible for disconnecting all equipment associated with the central coolant filtration system on the existing machine and turning such equipment over to the Government for future use. The Contractor shall supply only new machines and new associated equipment. Used and refurbished machines and used and refurbished equipment are unacceptable and will not be considered. All repair and replacement parts for the machine and associated equipment shall be new. All repair and replacement parts shall be available for purchase and supplied from within the continental United States.