Inactive Total Small Business Set-Aside (FAR 19.5)

AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this... AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is W22G1F22T6001 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2022-03. The associated North American Industrial Classification System (NAICS) code for this procurement is 326140 with a small business size standard of 1,000.00 employees. This requirement is a Small Business Set-Aside and only qualified offerors may submit bids. The solicitation pricing on https://marketplace.unisonglobal.com will start on the date this solicitation is posted, and, unless otherwise displayed at https://marketplace.unisonglobal.com, will end on: 2022-02-01 12:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be Richmond, KY 40475 The ACC - RI ID Blue Grass Army Depot requires the following items, Meet or Exceed, to the following: LI 001: Forward Pad Manufacture of the Forward Pad for the Advanced Precision Kill Weapon System (APKWS) Guided Rocket, a member of the Hydra family of tactical rockets IAW attached drawing 13722933 and Attachment 2- Purchase Description APKWS Components, 21 Dec 2021 Pt# 13722933 Certificate of Conformance and a Certificate of Analysis is required WITH each shipment., 836, EA; LI 002: TUBE, INNER Manufacture of the Tube, Inner Polyethylene Plastic Pipe, 68.34 inches in length, 2.86 inches ID for the Advanced Precision Kill Weapon System (APKWS) Guided Rocket, a member of the Hydra family of tactical rockets IAW attached drawing 13654250C and Attachment 2- Purchase Description APKWS Components, 21 Dec 2021 Pt# 13654250-2 Certificate of Conformance and a Certificate of Analysis is required WITH each shipment., 3304, EA; LI 003: Collar Tube, Counter bore Manufacture of the Collar Tube Counter Bore for the Advanced Precision Kill Weapon System (APKWS) Guided Rocket IAW attached drawing 13723427A and Attachment 2- Purchase Description APKWS Components, 21 Dec 2021 Pt# 13723427 Certificate of Conformance and a Certificate of Analysis is required WITH each shipment., 1652, EA; LI 004: Collar Tube, Manufacture of the Foam Collar tube for the Advanced Precision Kill Weapon System (APKWS) Guided Rocket, a member of the Hydra family of tactical rockets IAW attached drawing 13722932A and Attachment 2- Purchase Description APKWS Components, 21 Dec 2021 Pt# 13722932 Certificate of Conformance and a Certificate of Analysis is required WITH each shipment., 11464, EA; LI 005: Aft Cushion Assembly Assembly of the Aft Cushion Assembly for the Advanced Precision Kill Weapon System (APKWS) Guided Rocket IAW attached drawing 13722934 and Attachment 2- Purchase Description APKWS Components, 21 Dec 2021 Assembly Pt# 13722934 Certificate of Conformance and a Certificate of Analysis is required WITH each shipment., 836, EA; LI 006: stiffener cushions Manufacture of the stiffener cushions for the Advanced Precision Kill Weapon System (APKWS) Guided Rocket, a member of the Hydra family of tactical rockets IAW attached drawing 13722936 and Attachment 2- Purchase Description APKWS Components, 21 Dec 2021 Pt# 13722936 Certificate of Conformance and a Certificate of Analysis is required WITH each shipment., 3264, EA; LI 007: Aft Cushion Manufacture of the Aft Cushion for the Advanced Precision Kill Weapon System (APKWS) Guided Rocket, a member of the Hydra family of tactical rockets IAW attached drawing 13722935A and Attachment 2- Purchase Description APKWS Components, 21 Dec 2021 See attached drawing 13722935A Pt# 13722935 Certificate of Conformance and a Certificate of Analysis is required WITH each shipment., 836, EA; LI 008: AFT PAD Manufacture of the Aft Pad for the Advanced Precision Kill Weapon System (APKWS) Guided Rocket, a member of the Hydra family of tactical rockets IAW attached drawing 13723423A and Attachment 2- Purchase Description APKWS Components, 21 Dec 2021 Pt# 13723423 Certificate of Conformance and a Certificate of Analysis is required WITH each shipment., 836, EA; LI 009: Forward Pad FAT Reference MIS-DTL-61068 Attachment 1 First Article Test Contract Clause for FY22 APKWS Attachment 2- Purchase Description APKWS Components, 21 Dec 2021, 24, EA; LI 010: TUBE, INNER FAT Reference MIS-DTL-61068 Attachment 1 First Article Test Contract Clause for FY22 APKWS Attachment 2- Purchase Description APKWS Components, 21 Dec 2021, 96, EA; LI 011: Collar Tube, Counter bore FAT Reference MIS-DTL-61068 Attachment 1 First Article Test Contract Clause for FY22 APKWS Attachment 2- Purchase Description APKWS Components, 21 Dec 2021, 48, EA; LI 012: Collar Tube FAT Reference MIS-DTL-61068 Attachment 1 First Article Test Contract Clause for FY22 APKWS Attachment 2- Purchase Description APKWS Components, 21 Dec 2021, 336, EA; LI 013: Aft Cushion FAT Reference MIS-DTL-61068 Attachment 1 First Article Test Contract Clause for FY22 APKWS Attachment 2- Purchase Description APKWS Components, 21 Dec 2021, 24, EA; LI 014: stiffener Cushion FAT Reference MIS-DTL-61068 Attachment 1 First Article Test Contract Clause for FY22 APKWS Attachment 2- Purchase Description APKWS Components, 21 Dec 2021, 96, EA; LI 015: AFT PAD FAT Reference MIS-DTL-61068 Attachment 1 First Article Test Contract Clause for FY22 APKWS Attachment 2- Purchase Description APKWS Components, 21 Dec 2021, 24, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at https://marketplace.unisonglobal.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, ACC - RI ID Blue Grass Army Depot intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. ACC - RI ID Blue Grass Army Depot is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at https://marketplace.unisonglobal.com. There is no cost to register, review procurement data or make a bid on https://marketplace.unisonglobal.com. Offerors that are not currently registered to use https://marketplace.unisonglobal.com should proceed to https://marketplace.unisonglobal.com to complete their free registration. Offerors that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerors may not artificially manipulate the price of a transaction on https://marketplace.unisonglobal.com by any means. It is unacceptable to place bad faith bids, to use decoys in the https://marketplace.unisonglobal.com process or to collude with the intent or effect of hampering the competitive https://marketplace.unisonglobal.com process. Should offerors require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 45 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. This solicitation requires registration with the System for Award Management (SAM) at the time an offer or quotation is submitted, excluding the exceptions outlined in FAR 4.1102(a). Registration information can be found at www.sam.gov. Delivery must be made within 30 days or less after receipt of order (ARO). The offeror must provide within its offer the number of days - not to exceed 30 - required to make delivery after it receives a purchase order from the buyer. It is also required any contractor doing business with the government under contract be registered in ORCA, website url below: https://orca.bpn.gov/ Sellers must read and comply with all specifications, shipping information, and terms outlined in the attachments. BIDS are to be submitted on the FedBid ONLY or they will not be accepted. The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1,Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3,Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal. The associated North American Industrial Classification System (NAICS) code for this procurement can be found. The small business size standard for that NAICS code can be found at https://www.sba.gov/ sites/default/files/files/Size_Standards_Table.pdf "52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition On Storage And Disposal Of Toxic And Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material inspection and receiving report" Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law. Wide Area WorkFlow Payment Instructions Representation and Representation Disclosures The form(s) included in the buy must be returned with your quote. Failure to return the form(s) with your quote will result in your quote not being considered for award. The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions – Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Representation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea. 252.204-7012 Safeguarding of Unclassified Controlled Technical Information No multiple awards will be made. Quotes received through Unison Marketplace will be evaluated and awarded on an all-or-nothing basis. Please address your questions through the Unison Marketplace buy. If your questions are not being answered in a timely manner, please send your question to MAJ Travis Bettinger at travis.m.bettinger.mil@army.mil In accordance with DFAR provision 252.225-7000 Buy American Act--Balance of Payments Program Certificate, I certify that each end product, except those listed in paragraphs (c)(2) or (3) of the attached provision, is a domestic end product. ****YOU MUST FILL OUT THE ATTACHED IF OTHER THAN DOMESTIC END PRODUCT IF YOU DO NOT FILL IT OUT AND YOU DELIVER OTHER THAN A DOMESTIC END PRODUCT YOUR DELIVERY WILL NOT BE ACCEPTED********** ****READ DFARs Clause 252.225-7001 to ensure your product comes from a QUALIFYING COUNTRY******* ****IF YOU QUOTE A PRODUCT OTHER THAN DOMESTIC FROM A NON-QUALIFYING COUNTRY YOUR QUOTE WILL NOT BE ACCEPTED***** Reporting During Contract Performance See Attachment 1 Equal Opportunity All deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MILSTD-147E. This action will be awarded to the lowest price that is technically acceptable.