Inactive
Notice ID:W15QKN-20-Q-5301
SOURCES SOUGHT ANNOUNCEMENT: Design, provide and install generator and ATS (Automatic Transfer Switch) – Johnstown, PA THIS IS A SOURCES SOUGHT NOTICE AND SHOULD NOT BE CONSTRUED AS A SOLICITATION ANN...
SOURCES SOUGHT ANNOUNCEMENT: Design, provide and install generator and ATS (Automatic Transfer Switch) – Johnstown, PA THIS IS A SOURCES SOUGHT NOTICE AND SHOULD NOT BE CONSTRUED AS A SOLICITATION ANNOUNCEMENT. THE SUBMISSION OF THIS INFORMATION IS FOR PLANNING PURPOSES ONLY. IT IS NOT TO BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT TO PROCURE ANY SERVICES, NOR IS IT THE INTENT OF THE ARMY CONTRACTING COMMAND- NEW JERSEY TO AWARD A CONTRACT ON THE BASIS OF THIS REQUEST FOR INFORMATION (RFI) OR OTHERWISE PAY FOR THE INFORMATION SOUGHT. 1. CONTRACT INFORMATION: ACC- NJ-WSD is seeking preliminary marketing information, from capable and reliable sources to gain knowledge of potential qualified small business sources capable of performing all requirements in the SOW of but is not limited to design, provide and install generator and ATS (Automatic Transfer Switch) – Johnstown, PA. This is a single requirement. The North American Industry Classification System (NAICS) classified for this effort is 811310: Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance. The solicitation will consist of a FIRM-FIXED-PRICE contract for a period of performance will be 90 calendar days after receipt of Notice To Proceed. 2. PROJECT SCOPE: Replacement of manual cantilever sliding vehicle gate. BROAD DESCRIPTION of WORK: The Contractor shall visit the work site to survey the required installation, then shall provide all plant, labor, equipment, tools, materials, supervision and transportation to accomplish the following work which consists of but is not limited to: Design, provide and install generator and ATS (Automatic Transfer Switch). This shall include properly engineered concrete pads, conduit, cable, circuit breakers, and all equipment and materials. This shall also include interconnection of the ATS to utility power, and a 500A output circuit breaker panel in a NEMA 3R enclosure. Contractor shall coordinate with utility provider for interconnection requirements. Testing and commissioning shall be done by the Contractor. When complete; generator, equipment and controls shall be capable of operating the building at 100% operational level. The Contractor shall provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and other items and non-personal services necessary to perform the listed requirements as defined in this Scope of Work (SOW), except for those items specified as government furnished property and services. The Contractor shall perform to the standards of this SOW. 3. SUBMISSION REQUIREMENTS: All interested firms shall submit a Capability Statement and email to Theresa.m.eckstein.civ@mail.mil. Submission shall be received by 10:00 AM, Eastern Standard Time, 16 June 2020 and shall not exceed four (4) one-sided, 8-1/2 x 11 pages. This request for information is only for market research purposes. This RFI does not constitute a request for proposal nor does it restrict the Government as to the ultimate acquisition approach. The Government will not reimburse respondents for any costs incurred in preparation of response to this notice. All data received in response to this RFI marked or designated as corporate or proprietary will be fully protected from release outside the U.S. Government. No hard-copy or facsimile submissions will be accepted. Cover letters and extraneous materials (brochures, etc) will be considered. Interested offeror's shall address this requirement through this RFI in written format via email to theresa.m.eckstein.civ@mail.mil . Calls and fax transmittals in response to this RFI will NOT be accepted. 4. The Point of Contact is: Theresa Eckstein, Contract Specialist, ACC-NJ-WS Fort Dix, theresa.m.eckstein.civ@mail.mil
