Inactive

UPS Requirements Accept universal AC input power (80-240VAC, 47-65Hz & 28 VDC) and outputs 2,000 Watts continuous, with a 4,000-Watt surge UPS should be and all in one solution and multiple cases due ... UPS Requirements Accept universal AC input power (80-240VAC, 47-65Hz & 28 VDC) and outputs 2,000 Watts continuous, with a 4,000-Watt surge UPS should be and all in one solution and multiple cases due to size limitations The UPS should provide necessary power for a 20-minute runtime at 2,000 Watts The UPS is fully capable of acting as a UPS with 0 milli-second transfer time The UPS comes standard with (4) 120 VAC, 15 Amp outlets on a common 20 Amp circuit Must be able to handle the 1,200-Watt normal operating load with a maximum 2,000 Watts load Requires three Li Expander Pak 1300s, this will provide 3.9 kWh of energy storage The UPS should provide necessary power for 20-minute runtime at 2,000 W in the event of power loss The UPS should be able to accept solar, AC, DC, and other inputs Weighs no more than 70 lbs should have dimensions of about 25 x 20 x 14 inches Should have Li Expander Pak 1300 weighs 34 lb and is about 18 x 18 x 5 in. The UPS should be plug-and-play, ruggedized, modular, portable, and built to MIL-STD-810H UPS must have forced convection with internal fans to ensure continuous cooling due hot climate use. Requirement is for SDDC This requirement is to purchase 27 Solar Stik (Part # 20-0205197) ruggedized Uninterruptable Power Supply (UPS) in support of the deployable communications program mission. The required UPS is a component of the Brigade Standard Communications Package (BSCP) that is used to support USTRANSCOM and SDDC port management missions and well as all assigned brigade’s tactical support. Delivery: Attn: Mr. Robert Sharp Building 159 (Basement), East Ave Rock Island Arsenal IL, 61299 Work# 309-644-5408 Cell# 785-632-0465 robert.j.sharp18.civ@army.mil