Lidar/Polarization Switching Pockel Cell
***Amendment 1: Extended the response due date to 24 May 2019*** This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplement... ***Amendment 1: Extended the response due date to 24 May 2019*** This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This requirement is advertised as a Total Small Business Set Aside. The NAICS Code for this synopsis/solicitation is 333314, Size Standard is 1250 EMPLOYEES. All qualified small businesses under this industry are encouraged to submit quotes. Solicitation/Purchase Requisition Number TEMP-6887619 is issued as a Request for Quote (RFQ). This document incorporates provisions and clauses that are in effect through Federal Acquisition Circular 2019-01, 20 Dec 2018. AFRL/RDKB intends to purchase the 2 Pockels Cell requirments below. The Government contemplates award of a firm-fixed price contract resulting from this solicitation for the following Contract Line Item Numbers (CLIN): CLIN 0001 Sodium Lidar Pockel Cell with Driver QUANTITY: 1 Ea (SEE ATTACHED SPECIFICATIONS) CLIN 0002 Polarization Switching Pockels Cell QUANTITY: 1 Ea (SEE ATTACHED SPECIFICATIONS) DELIVERY DATE: 30 days ADC LOCATION: Kirtland AFB, NM 87117 (Contact Specialist for exact delivery address at time of award) WARRANTY: 1 YEAR NET 30 FOB: Destination Inspection and Acceptance: Destination NOTE: Please provide a quote for the item(s) above. When a quote is submitted, the proposal will be sent to the technical advisor for compatibility and verification. Any offeror providing and/or equal product shall thoroughly describe how their product meets all the required characteristics listed in far clause 52.212-2. Failure to do so will make that offeror non-responsive and will not be considered for award. OFFER DUE DATE AND TIME: 12:01 PM 24 May 2019 LATE OFFERS: Offerors are responsible for submitting offers, and any modifications, revisions, or withdrawals, so as to reach the Government office designated in this solicitation by the time specified in the solicitation. Quotations/offers or modification of quotes/offers received at the address specified for the receipt of offers after the exact time specified for receipt of offers WILL NOT be considered (ref. FAR 52.212-1(f)). CONTRACTING OFFICE CONTACT INFORMATION: All offers and questions pertaining to this solicitation shall be sent by mail, email or fax to the address below. Electronic documents shall be submitted in .pdf, .doc, or .xls. Communication containing documents in any other format, including .zip, may be blocked or stripped by the Government's server and may not be received by this office. Phillip Scott AFRL/RDKB 3550 Aberdeen Ave SE, Bldg 499 Kirtland AFB, NM 87117-5776 phillip.scott.10@us.af.mil Billy G. Sherrod AFRL/RDKB 3550 Aberdeen Ave SE, Bldg 499 Kirtland AFB, NM 87117-5776 billy.sherrod@us.af.mil ADDITIONAL INFORMATION: Be advised that all interested parties must be registered in the System for Award Management (SAM) Database in order to receive payment for products/services rendered to the Government as the result of an award. If you are not registered you may request an application at (334) 206-7828 or though the SAM website at https://www.sam.gov. All payments are to be paid via the Internet through the Wide Area Workflow (WAWF) system. WAWF may be accessed at https://wawf.eb.mil. WAWF training may be accessed online at http://wawftraining.com. Payment information may be accessed using the DFAS website at https://www.dfas.mil. Your purchase order/contract number or invoice will be required to inquire status of your payment. The following provisions and clauses apply to this procurement: FAR 52.203-18, Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements--Representation (Jan 2017) FAR 52.204-7, System for Award Management FAR 52.204-13, System for Award Management Maintenance FAR 52.209-2, Prohibition on Contracting with Inverted Domestic Corporations-Representation FAR 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations FAR 52.212-1, Instructions to Offerors - Commercial Items FAR 52.212-4, Contract Terms and Conditions-Commercial Items FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items. [in paragraphs (b) and (c) the following clauses apply: 52.204-10, 52.209-6; 52.219-6, 52.219-28, 52.222-3, 52.222-19, 52.222-21, 52.222-26, 52.222-36; 52.222-50, 52.223-18, 52.225-13, 52.232-33] FAR 52.219-1 Alt 1, Small Business Program Representations FAR 52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran-Representation and Certifications FAR 52.232-1, Payments FAR 52.232-8, Discounts for Prompt Payment FAR 52.232-39, Unenforceability of Unauthorized Obligations FAR 52.232-40, Providing Accelerated Payments to Small Business Subcontractors FAR 52.233-1, Disputes FAR 52.233-3, Protest After Award FAR 52.233-4, Applicable Law for Breach of Contract Claim FAR 52.243-1, Changes-Fixed-Price FAR 52.247-34, F.o.b. - Destination FAR 52.249-1, Termination for Convenience of the Government (Fixed-Price) (Short Form) FAR 52.253-1, Computer Generated Forms DFARS 252.203-7000, Requirements Relating to Compensation of Former DoD Officials DFARS 252.203-7002, Requirement to Inform Employees of Whistleblower Rights DFARS 252.203-7005, Representation Relating Compensation of Former DoD Officials DFARS 252.204-7003, Control of Government Personnel Work Product DFARS 252.204-7008, Compliance with Safeguarding Covered Defense Information Controls DFARS 252.204-7012, Safeguarding of Unclassified Controlled Technical Information DFARS 252.204-7015, Disclosure of Information to Litigation Support Contractors. DFARS 252.211-7003, Item Identification and Valuation DFARS 252.215-7007, Notice of Intent to Resolicit DFARS 252.223-7008, Prohibition of Hexavalent Chromium DFARS 252.225-7000, Buy American Statute-Balance of Payments Program Certificates DFARS 252.225-7001, Buy American and Balance of Payments Program DFARS 252.225-7002, Qualifying Country Sources as Subcontractors DFARS 252.225-7048, Export-Controlled Items DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports DFARS 252.232-7010, Levies on Contract Payments DFARS 252.243-7001, Pricing of Contract Modification DFARS 252.244-7000, Subcontracts for Commercial Items DFARS 252.247-7023, Transportation of Supplies by Sea The following full text provisions and clauses apply to this procurement: FAR 52.209-2-Prohibition on Contracting with Inverted Domestic Corporations- Representation (a) Definitions. "Inverted domestic corporation" and "subsidiary" have the meaning given in the clause of this contract entitled Prohibition on Contracting with Inverted Domestic Corporations (52.209-10). (b) Government agencies are not permitted to use appropriated (or otherwise made available) funds for contracts with either an inverted domestic corporation, or a subsidiary of an inverted domestic corporation, unless the exception at 9.108-2(b) applies or the requirement is waived in accordance with the procedures at 9.108-4. (c) Representation. The offeror represents that- (1) It [ ] is, [ ] is not an inverted domestic corporation; and (2) It [ ] is, [ ] is not a subsidiary of an inverted domestic corporation. (End of provision) 52.212-2, Evaluation -- Commercial Items (OCT 2014) (a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: i - Technical Acceptability, technical evaluation team will evaluate by assigning a rating of "acceptable" or "unacceptable". The Government will evaluate a minimum of three (3) lowest priced offers for technical acceptability in accordance with the solicitation. If none of the lowest three (3) are technically acceptable, the Government will evaluate the next three (3) lowest priced proposals until one proposal is technically acceptable, or until all offers have been evaluated. Only those proposals considered technically acceptable will receive further consideration for award. Once a proposal is deemed acceptable, all technical proposals are considered equal. Technical Specifications: Lidar Pockels Cell Technical Requirements • Pockel cell with <1% transmission loss at 1178nm wavelength • Pockel cell driver with rise time <1.6ns • Pockel cell can switch with a repetition rate <1 KHz • Pockel cell driver must be capable of a minimum pulse duration <16ns • Pockel cell with a damage threshold >10KW/cm^2 Polarization Switching Pockels Cell Technical Requirements • Pockel cell with a damage threshold >100 MW/cm^2. • Pockel Cell must be AR coated for 589nm • Remotely-located HV power supply connected to the Pockels Cell with an umbilical cable >3meters • Pockel cell which switches between zero (fully discharged) and the half-wave voltage (fully charged) • Unipolar solution for driving the Pockel cell • Pockel cell can switch with a variable repetition rate centered at 330 KHz (Larmor Frequency of Earth's geomagnetic field over SOR) • Aperture size for the pockel cell >5mm * Specification sheet is also attached to solicitation post ii - Price, order all proposals by total evaluated price from lowest to highest. (b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s). (c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. (End of provision) FAR 52.212-3 Alt I, Offeror Representations and Certification-Commercial Items (all offerors shall include a completed copy of this provision with their proposal unless electronically filed in System for Award Management) (End of provision) FAR 52.222-22, Previous Contracts and Compliance Reports. Previous Contracts and Compliance Reports (Feb 1999) The offeror represents that -- It * has, * has not participated in a previous contract or subcontract subject to the Equal Opportunity clause of this solicitation; It * has, * has not filed all required compliance reports; and Representations indicating submission of required compliance reports, signed by proposed subcontractors, will be obtained before subcontract awards. (End of provision) 52.222-25 AFFIRMATIVE ACTION COMPLIANCE (APR 1984) The offeror represents that (a) [ ] it has developed and has on file, [ ] has not developed and does not have on file, at each establishment, affirmative action programs required by the rules and regulations of the Secretary of Labor (41 CFR 60-1 and 60-2), or (b) [ ] has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor. (End of provision) FAR 52.225-18 - Place of Manufacture (Mar 2015) (a) Definitions. As used in this clause-"Manufactured end product" means any end product in Federal Supply Classes (FSC) 1000-9999, except- (1) FSC 5510, Lumber and Related Basic Wood Materials; (2) Federal Supply Group (FSG) 87, Agricultural Supplies; (3) FSG 88, Live Animals; (4) FSG 89, Food and Related Consumables; (5) FSC 9410, Crude Grades of Plant Materials; (6) FSC 9430, Miscellaneous Crude Animal Products, Inedible; (7) FSC 9440, Miscellaneous Crude Agricultural and Forestry Products; (8) FSC 9610, Ores; (9) FSC 9620, Minerals, Natural and Synthetic; and (10) FSC 9630, Additive Metal Materials. "Place of manufacture" means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture. (b) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly- (1) [ ] In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or (2) [ ] Outside the United States. (End of provision) FAR 52.252-1, Solicitation Provisions Incorporated by Reference (Feb 1998) This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es): http://farsite.hill.af.mil (End of provision) FAR 52.252-2, Clauses Incorporated by Reference (Feb 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): http://farsite.hill.af.mil (End of clause) FAR 52.252-5, Authorized Deviations in Provisions (Apr 1984) (a) The use in this solicitation of any Federal Acquisition Regulation (48 CFR Chapter 1) provision with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the provision. (b) The use in this solicitation of any Defense Federal Acquisition Regulation Supplement (48 CFR Chapter 2) provision with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation. (End of provision) FAR 52.252-6, Authorized Deviations in Clauses (Apr 1984) (a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause. (b) The use in this solicitation or contract of any Defense Federal Acquisition Regulation Supplement (48 CFR Chapter 2) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation. (End of clause) 252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013) (a) Definitions. As used in this clause-- Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization. Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF). Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system. (b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports. (c) WAWF access. To access WAWF, the Contractor shall-- (1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and (2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site. (d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/. (e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol. (f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order: (1) Document type. The Contractor shall use the following document type(s). Combo Invoice & Receiving Report (2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer. Acceptance: Government Inspection: Government (3) Document routing. The Contractor shall use the information in the Routing Data Tabl y to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system. Routing Data Table* (Will be filled out at time of award) -------------------------------------------------------------------------------------------- Field Name in WAWF Data to be entered in WAWF -------------------------------------------------------------------------------------------- Pay Official DoDAAC N/A Issue By DoDAAC N/A Admin DoDAAC N/A Inspect By DoDAAC N/A Ship To Code N/A Ship From Code N/A Mark For Code N/A Service Approver (DoDAAC) N/A Service Acceptor (DoDAAC) N/A Accept at Other DoDAAC N/A LPO DoDAAC N/A DCAA Auditor DoDAAC N/A Other DoDAAC(s) N/A -------------------------------------------------------------------------------------------- (4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevan ed in DFARS Appendix F, (e.g. timesheets) in support of each payment request. (5) WAWF email notifications. The Contractor shall enter the email address identified below in the "Send Additional Email Notifications" field of WAWF once a document is submitted in the system. Will be filled out at time of award. (g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact. N/A (2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988. (End of clause) AFFARS 5352.201-9101 Ombudsman OMBUDSMAN (Apr 2014) (a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the interested party to another official who can resolve the concern. (b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMB Circular A-76 competition performance decisions). (c) If resolution cannot be made by the contracting officer, the interested party may contact: Listette Leduc, AFRL/PK Phone: (937)904-4407 Email: lisette.leduc@us.af.mil And the AFICA HQ Ombudsman is: AFICA/KP Director 1940 Allbrook Drive, Building 1 Wright-Patterson AFB OH 45433 Phone: (937)257-5529 Fax: (937)-656-0919 Concerns, issues, disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/DRU/HQ AFICA/SMC ombudsman level, may be brought by the interested party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330- 1060, phone number (571) 256-2395, facsimile number (571) 256-2431. (d) The ombudsman has no authority to render a decision that binds the agency. (e) Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the Contracting Officer. (End of clause) AFFARS 5352.223.9000, ELIMINATION OF USE OF CLASS I OZONE DEPLETING SUBSTANCES (ODS) (NOV 2012) (a) Contractors shall not: (1) Provide any service or product with any specification, standard, drawing, or other document that requires the use of a Class I ODS in the test, operation, or maintenance of any system, subsystem, item, component, or process; or (2) Provide any specification, standard, drawing, or other document that establishes a test, operation, or maintenance requirement that can only be met by use of a Class I ODS as part of this contract/order. [Note: This prohibition does not apply to manufacturing.] (bThis is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This requirement is advertised as a Total Small Business Set Aside. The NAICS Code for this synopsis/solicitation is 333314, Size Standard is 1250 EMPLOYEES. All qualified small businesses under this industry are encouraged to submit quotes. Solicitation/Purchase Requisition Number TEMP-6887619 is issued as a Request for Quote (RFQ). This document incorporates provisions and clauses that are in effect through Federal Acquisition Circular 2019-01, 20 Dec 2018. AFRL/RDKB intends to purchase the 2 Pockels Cell requirments below. The Government contemplates award of a firm-fixed price contract resulting from this solicitation for the following Contract Line Item Numbers (CLIN): CLIN 0001 Sodium Lidar Pockel Cell with Driver QUANTITY: 1 Ea (SEE ATTACHED SPECIFICATIONS) CLIN 0002 Polarization Switching Pockels Cell QUANTITY: 1 Ea (SEE ATTACHED SPECIFICATIONS) DELIVERY DATE: 30 days ADC LOCATION: Kirtland AFB, NM 87117 (Contact Specialist for exact delivery address at time of award) WARRANTY: 1 YEAR NET 30 FOB: Destination Inspection and Acceptance: Destination NOTE: Please provide a quote for the item(s) above. When a quote is submitted, the proposal will be sent to the technical advisor for compatibility and verification. Any offeror providing and/or equal product shall thoroughly describe how their product meets all the required characteristics listed in far clause 52.212-2. Failure to do so will make that offeror non-responsive and will not be considered for award. OFFER DUE DATE AND TIME: 12:01 PM 10 May 2019 LATE OFFERS: Offerors are responsible for submitting offers, and any modifications, revisions, or withdrawals, so as to reach the Government office designated in this solicitation by the time specified in the solicitation. Quotations/offers or modification of quotes/offers received at the address specified for the receipt of offers after the exact time specified for receipt of offers WILL NOT be considered (ref. FAR 52.212-1(f)). CONTRACTING OFFICE CONTACT INFORMATION: All offers and questions pertaining to this solicitation shall be sent by mail, email or fax to the address below. Electronic documents shall be submitted in .pdf, .doc, or .xls. Communication containing documents in any other format, including .zip, may be blocked or stripped by the Government's server and may not be received by this office. Phillip Scott AFRL/RDKB 3550 Aberdeen Ave SE, Bldg 499 Kirtland AFB, NM 87117-5776 phillip.scott.10@us.af.mil Billy G. Sherrod AFRL/RDKB 3550 Aberdeen Ave SE, Bldg 499 Kirtland AFB, NM 87117-5776 billy.sherrod@us.af.mil ADDITIONAL INFORMATION: Be advised that all interested parties must be registered in the System for Award Management (SAM) Database in order to receive payment for products/services rendered to the Government as the result of an award. If you are not registered you may request an application at (334) 206-7828 or though the SAM website at https://www.sam.gov. All payments are to be paid via the Internet through the Wide Area Workflow (WAWF) system. WAWF may be accessed at https://wawf.eb.mil. WAWF training may be accessed online at http://wawftraining.com. Payment information may be accessed using the DFAS website at https://www.dfas.mil. Your purchase order/contract number or invoice will be required to inquire status of your payment. The following provisions and clauses apply to this procurement: FAR 52.203-18, Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements--Representation (Jan 2017) FAR 52.204-7, System for Award Management FAR 52.204-13, System for Award Management Maintenance FAR 52.209-2, Prohibition on Contracting with Inverted Domestic Corporations-Representation FAR 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations FAR 52.212-1, Instructions to Offerors - Commercial Items FAR 52.212-4, Contract Terms and Conditions-Commercial Items FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items. [in paragraphs (b) and (c) the following clauses apply: 52.204-10, 52.209-6; 52.219-6, 52.219-28, 52.222-3, 52.222-19, 52.222-21, 52.222-26, 52.222-36; 52.222-50, 52.223-18, 52.225-13, 52.232-33] FAR 52.219-1 Alt 1, Small Business Program Representations FAR 52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran-Representation and Certifications FAR 52.232-1, Payments FAR 52.232-8, Discounts for Prompt Payment FAR 52.232-39, Unenforceability of Unauthorized Obligations FAR 52.232-40, Providing Accelerated Payments to Small Business Subcontractors FAR 52.233-1, Disputes FAR 52.233-3, Protest After Award FAR 52.233-4, Applicable Law for Breach of Contract Claim FAR 52.243-1, Changes-Fixed-Price FAR 52.247-34, F.o.b. - Destination FAR 52.249-1, Termination for Convenience of the Government (Fixed-Price) (Short Form) FAR 52.253-1, Computer Generated Forms DFARS 252.203-7000, Requirements Relating to Compensation of Former DoD Officials DFARS 252.203-7002, Requirement to Inform Employees of Whistleblower Rights DFARS 252.203-7005, Representation Relating Compensation of Former DoD Officials DFARS 252.204-7003, Control of Government Personnel Work Product DFARS 252.204-7008, Compliance with Safeguarding Covered Defense Information Controls DFARS 252.204-7012, Safeguarding of Unclassified Controlled Technical Information DFARS 252.204-7015, Disclosure of Information to Litigation Support Contractors. DFARS 252.211-7003, Item Identification and Valuation DFARS 252.215-7007, Notice of Intent to Resolicit DFARS 252.223-7008, Prohibition of Hexavalent Chromium DFARS 252.225-7000, Buy American Statute-Balance of Payments Program Certificates DFARS 252.225-7001, Buy American and Balance of Payments Program DFARS 252.225-7002, Qualifying Country Sources as Subcontractors DFARS 252.225-7048, Export-Controlled Items DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports DFARS 252.232-7010, Levies on Contract Payments DFARS 252.243-7001, Pricing of Contract Modification DFARS 252.244-7000, Subcontracts for Commercial Items DFARS 252.247-7023, Transportation of Supplies by Sea The following full text provisions and clauses apply to this procurement: FAR 52.209-2-Prohibition on Contracting with Inverted Domestic Corporations- Representation (a) Definitions. "Inverted domestic corporation" and "subsidiary" have the meaning given in the clause of this contract entitled Prohibition on Contracting with Inverted Domestic Corporations (52.209-10). (b) Government agencies are not permitted to use appropriated (or otherwise made available) funds for contracts with either an inverted domestic corporation, or a subsidiary of an inverted domestic corporation, unless the exception at 9.108-2(b) applies or the requirement is waived in accordance with the procedures at 9.108-4. (c) Representation. The offeror represents that- (1) It [ ] is, [ ] is not an inverted domestic corporation; and (2) It [ ] is, [ ] is not a subsidiary of an inverted domestic corporation. (End of provision) 52.212-2, Evaluation -- Commercial Items (OCT 2014) (a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: i - Technical Acceptability, technical evaluation team will evaluate by assigning a rating of "acceptable" or "unacceptable". The Government will evaluate a minimum of three (3) lowest priced offers for technical acceptability in accordance with the solicitation. If none of the lowest three (3) are technically acceptable, the Government will evaluate the next three (3) lowest priced proposals until one proposal is technically acceptable, or until all offers have been evaluated. Only those proposals considered technically acceptable will receive further consideration for award. Once a proposal is deemed acceptable, all technical proposals are considered equal. Technical Specifications: Lidar Pockels Cell Technical Requirements • Pockel cell with <1% transmission loss at 1178nm wavelength • Pockel cell driver with rise time <1.6ns • Pockel cell can switch with a repetition rate <1 KHz • Pockel cell driver must be capable of a minimum pulse duration <16ns • Pockel cell with a damage threshold >10KW/cm^2 Polarization Switching Pockels Cell Technical Requirements • Pockel cell with a damage threshold >100 MW/cm^2. • Pockel Cell must be AR coated for 589nm • Remotely-located HV power supply connected to the Pockels Cell with an umbilical cable >3meters • Pockel cell which switches between zero (fully discharged) and the half-wave voltage (fully charged) • Unipolar solution for driving the Pockel cell • Pockel cell can switch with a variable repetition rate centered at 330 KHz (Larmor Frequency of Earth's geomagnetic field over SOR) • Aperture size for the pockel cell >5mm * Specification sheet is also attached to solicitation post ii - Price, order all proposals by total evaluated price from lowest to highest. (b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s). (c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may acce...
Links ()
Attachments ()
Data sourced from SAM.gov.
View Official Posting »