Inactive

This is a Sources Sought. contractors who wish to compete for a potential upcoming acquisition must provide socio-economic, DUNS number, and delivery times. This is market research to find contractors... This is a Sources Sought. contractors who wish to compete for a potential upcoming acquisition must provide socio-economic, DUNS number, and delivery times. This is market research to find contractors with the ability to provide the item described below in salient characteristics. This is not a request for quotes, proposal, nor invitation for bids. Questions must be recieved by 16 June 2020 by 9 A.M. Central. Provide information to danny.h.frederick.mil@mail.mil with subject line: Sources Sought Yard Ramp. Yard ramp must meet all salient characteristics mentioned under Salient Characteristics below. Salient Characteristics Quantity: 1 1. Ramp must have pintle tow and Lunette Ring design. 2. Ramp must come with detachable tow bar at a minimum of 7 feet long and must have Lunette Ring for towing. 3. Tow bar must be designed to utilize fork lift or pintle hitch attachments. 4. Ramp hitch must not exceed 2ft- 71/2 inches high to easily hook to the truck hitch 5. Ramp must have a minimum of 80,000 lbs. pound lengthwise load capacity. 6. Ramp must meet the 120 inch width from outside to outside. 7. Ramp must have a minimum of 115 inches inside drivable space and not to exceed 120 inches of width or travel space throughout the length of the ramp. Front to back. 8. Ramp drivable surface must be serrated steel grating travel surface. The inside travel surface must be 115 inches inside to inside. Over all maximum length for the drivable surface must be 40 feet, with a minimum of 30 feet being on incline to a minimum of 10 foot flat, level surface. 9. Ramp must have and minimum of 6 inch high safety curbs and not exceed 8 inch high safety curbs along the entire length of the outside side edges of the ramp. 10. Ramp must have a hand crank to adjust front legs with to working height range of a minimum of 42 inches to a maximum height of 56 inches 11. Ramp must have hinged leveling plates to allow for slight height fluctuations. 12. Ramp must have a minimum of 33 inch wheels mounted on 12 lug axle. 13. Ramp must have safety chains to secure the ramp while in use. Chains must be rated to hold a minimum of 20,000 lbs. 14. Ramp must have abrasive blasted and painted in the desert tan color. 15. Ramp must have rubber bumper stops on the rear edge to allow for the flatbed trailers to back up to it. 16. Delivery FOB Destination Memphis, TN