Inactive

Amendment 0003 change proposal due date to 4 June 2024. _______________________________________________________________________ Amendment 0002 change proposal due date to 22 May 2024. ________________... Amendment 0003 change proposal due date to 4 June 2024. _______________________________________________________________________ Amendment 0002 change proposal due date to 22 May 2024. _______________________________________________________________________ PURPOSE FOR AMD 0001: The Defense Logistics Agency (DLA) is issuing amendment 0001 to solicitation SPRRA2-24-R- 0010 to remove erroneous parts included on previous submission, to correct FY26 and FY27 estimated quantities, and remove First Article Test (FAT) requirement. DLA Huntsville- Aviation 25 January 2024 DLA-AVN-AHCA SUBJECT: Letter Request for Proposal (RFP) SPRRA2-24-R-0010 DRS Network and Imaging Systems, Inc. 100 N Babcock St Melbourne, FL, 32935 The Defense Logistics Agency (DLA) is issuing solicitation SPRRA2-24-R-0010 to add parts to the DLA Enterprise subsumable contract, SPRRA2-20-D-0012 (DLA Huntsville Spares) for fiscal years, 2025 (FY25) through 2027 (FY27). SPRRA2-20-D-0012 subsumable contract falls under the DRS/DLA Enterprise Umbrella contract, SPRRA2-20-D-0011. These parts will support the Improved Bradley Acquisition Subsystems (IBAS) Weapon System. This is a sole sourced requirement for DRS Network and Imaging Systems, Inc CAGE 32865 and as such is being procured in accordance with FAR 6.302-1(a)(2); “…only one responsible source and no other supplies or services will satisfy agency requirements.” Cost and Pricing Proposal Content/Cost/Price Supporting Documentation. At a minimum, offeror proposal shall include the following: The Government contemplates Firm-Fixed-Pricing (FFP) for this effort in accordance with the overarching basic contract, and requests pricing for three (3) years. This is an RFP for PN support requirements generated by the Tactical Aviation and Grounds Munitions (TAGM) and AMCOM Logistics Center (ALC) Project Offices used on the Improved Bradley Acquisition Subsystem (IBAS). The offeror shall prepare one summary schedule. Along with the summary schedule, the offeror shall provide fully supportable cost data which substantiates the offeror’s summary schedule for the P/Ns. Submission must include working excel formulas, if applicable. Submission shall be in accordance with FAR 15.408, Table 15-2, Instructions for Submitting Cost/Price Proposals When Certified Cost or Pricing Data is required. Back up documentation shall detail the labor categories to be used, labor hours proposed by category, material and equipment cost, and a total cost breakdown. The offeror shall also provide supporting cost/price documentation for all proposed subcontractors, to include the proposed type of subcontract. To comply with this solicitation, the offeror is required to price Fiscal Years 2025-2027 (FY25-27). Items, and the possibility of more in the future, will be repriced again at the end of FY27. FAR 15.408, Table 15-2 requires prime contractors and higher tiered subcontractors to conduct price analysis of all subcontractor proposals and a cost analysis of each subcontractor proposal for which certified cost or pricing data is required. Fair and reasonable subcontractor analysis in accordance with FAR 15.404-3(b) Subcontract Pricing Considerations shall accompany proposal submission. An un-sanitized cost breakdown (all cost information, rates/dollars) shall also be provided in a Microsoft Excel File. In support of the proposed Indirect Expense Rates, Inter-Organizational Transfers (IOTs) and its subcontractor(s) shall provide documentation of the most recent Indirect Expense Rates, to include, at least one of the following: Forward Pricing Rate Agreements (FPRAs) with DCAA or DCMA. Forward Pricing Rate Recommendations (FPRR) from DCAA or DCMA. Forward Pricing Rate Proposal (FPRP), Approved Provisional Rates Proposal or other statement of current rates including three (3) years of Incurred Cost Submissions to DCAA detailing pools and bases (by expense accounts) information which validates the calculations or Three (3) years historical actual detailing pools and bases (by expense accounts) information which validates the calculations. Note: The rates reflected in the FPRA, FPRR, FPRP, Approved Provisional Rates Proposal or other statement of current rates shall directly match the proposed rates as detailed in the proposal. If the rates do not match, the offeror shall provide sufficient detail explaining how the proposed rates are realistic. Identify key business unit personnel related to contracting, technical and pricing questions and known DCMA or DCAA business unit points of contact (POCs) to expedite the question/review process. In accordance with FAR clause 52.215-22, Limitation on Pass-Through Charges, if offeror intends to subcontract more than 70 percent of the total cost of work to be performed under the resulting add-on, offeror shall identify in its proposal a description of the value-added provided by offeror as related to the work to be performed by the subcontractor(s) as defined by FAR clause 52.215-22. Offeror shall identify and address in its proposal all actual or potential Organizational Conflicts of Interests (OCIs), per FAR 9.5, or state that there are no known potential OCIs. If any actual or potential OCIs are identified, then offeror shall submit a mitigation plan. No assumptions, terms, conditions, caveats or exceptions submitted within offeror proposal, in response to this RFP, will be accepted or incorporated into the basic contract. All assumptions shall be addressed and/or resolved through the use of the question-and-answer period. Offeror shall submit their subcontracting plan with their proposal as a separate document. The subcontract shall be incorporated by reference and made a part of the final award. The subcontract will be used to ensure offeror is on track to meet the goals established in the base contract. Additional Considerations Containers - The Government did not provide separate Subcontract Line Item Numbers (SLINs) to accommodate items that may require reusable shipping containers. However, if an item requires a reusable shipping container, a SLIN may be added to allow the offeror to price the item with a shipping container. The offeror shall propose the most expeditious delivery schedule for each item. First Article Test (FAT) may be required. The requirement will be included on the applicable delivery orders. FAT must be separately priced. The offeror may submit a Request for FAT Waiver; however, FAT shall be included on the award in anticipation of the requirement on future orders. Upon receipt of the FAT Waiver request, DLA will submit documentation to SRD for evaluation and technical consideration. Economic Order Quantities (EOQs) shall be proposed by the contract to ensure optimal ordering quantities. The EOQ information requested in this narrative, is being solicited to avoid acquisitions in disadvantageous quantities and to assist the Government in developing data for current and future acquisitions of this item. The Government reserves the right to amend, &/or cancel the solicitation and resolicit in the event information or requirements change. Evaluation Criteria - Minimum technical requirements. To be technically acceptable and thus, eligible for award, a proposal must conform to ALL solicitation requirements, such as terms and conditions, representations and certifications, and technical requirements provided within all sections of this solicitation and/or within its attached addenda. Proposals receiving a technical rating of “Unacceptable” will be ineligible for award. Price. In addition to meeting the solicitation’s technical and quantity increment or range requirements above and cost and pricing requirements below, the Government will evaluate a proposal’s pricing for reasonableness. Evaluation of a proposal's pricing will not obligate the Government to order the estimated quantities or to distribute orders in the manner evaluated. The Government may reject a proposal as “Unacceptable” if its pricing is determined to be materially unbalanced. Cost and Pricing Data. Offerors must provide all cost or pricing information required by FAR 15.4. Failure of a proposal to provide cost or pricing information required by FAR 15.4 will result in said proposal being deemed Unacceptable, and thus, ineligible for award. PDQR - The Product Quality Deficiency Report Program (Army Regulation 702-7) will be used when contractors: 1) deliver deficient items or 2) receive deficient items from a DoD supply chain in support of Army requirements. When requested, the Contractor shall assist the cognizant Contract Administration Office in evaluating PQDRs and exhibits for defects reported on items manufactured under this contract to determine the root cause for deficiencies. Corrective action and Preventative Action to preclude recurrence of discrepancies shall be an integral part of the Contractor’s Quality Program. These defects may be reported from any DoD activity that discovers a defective item. Ranges - Offerors are requested for increments or ranges of quantities as listed in the attachment. The awarded quantity, or quantities in the case of multiple items, will be based on the requirements of the Government and the combination of price and quantity per item that is the most advantageous to the Government. Quantity increments consist of a primary amount and alternate amounts based on incremental increases. The quantity awarded will be either the full primary, or one of the alternate quantities. Quantity ranges consist of a specific series of ranges. The quantity awarded may fall anywhere within range. If this is a request for quote (RFQ) or a request for proposal (RFP), an offer that only contains prices for quantities other than those quantities indicated in the schedule of supplies or services may be precluded from consideration for award if the contracting officer elects to make an award without discussion of proposals. The contract quantity range shall be determined by the total quantity at the time of delivery awarded. There shall be no downward adjustment to an already awarded delivery order regardless of if another delivery order is awarded in the same ordering period. For example, one delivery order quantity may not be combined with any other delivery order quantity to create a price break, even if the new delivery order is placed in the same ordering period. Each order stands on its own. In the event an order is issued for quantities outside the ranges established in the contract, the unit price associated with the highest list range will apply to that order. The contractor has the right to accept or reject any quantity outside the ranges established in the contract and adjust the production lead time / monthly delivery rate as appropriate. Packaging – Standard practice for military packaging shall be utilized (MIL-STD-2073-1). Delivery Schedule – Proposal shall include proposed production lead time and monthly delivery rate. Proposal Submission – Proposal shall be electronically submitted to Government. Offeror can contact contract team for a DOD Safe Site link for submission purposes. CLINS - NSNs listed on this effort may be awarded together or separately. Time Lines Solicitation Receipt – Request offeror acknowledge receipt of solicitation SPRRA2-24-R-0010 within 3 business days and feedback on feasibility in meeting the closing date of 4PM CST 1 April 2024 referenced in solicitation submittal email and SAM.GOV posting. If offeror elects to "No Bid", please provide detailed rationale and an alternate source of supply. Proposal Receipt - Upon receipt of proposal, DLA Contracting Team shall acknowledge receipt. Within 3 business days, the Government will identify deficiencies, request additional information/documentation, and/or provide proposal acceptance. Offeror proposal shall remain valid for a minimum of one hundred and eighty (180) days from the date of acceptance. Summary All communications SHALL be submitted in writing ONLY AND directly to the DLA Contract Team Members. Offeror shall not contact any other Government personnel other than the person(s) identified. Contacting any Government personnel other than the individual(s) identified could result in an organizational conflict of interest (OCI). Be advised that this requirement shall be advertised in the SAM.gov website for viewing by the general public. In the event another supplier indicates interest in responding to the requirement as a result of viewing the synopsis, a formal solicitation will be issued to accommodate that supplier. Please direct inquires, requests for clarification, and status updates to the DLA Contracting Team. Attachments: DRS INCREMENT I SPARES for a full list of PNs.

Inactive

No telephone requests will be accepted. Direct your requests and communication to: ATTN: DLA?AHCA via email Anna Phillips, Contract Specialist, via email anna.phillips@dla.mil. Solicitation will be pu... No telephone requests will be accepted. Direct your requests and communication to: ATTN: DLA?AHCA via email Anna Phillips, Contract Specialist, via email anna.phillips@dla.mil. Solicitation will be published in SAM.GOV, for all other inquiries, in the email subject line enter SPRRA2?24?R?0010, provide your name, the company name and CAGE Code and a telephone number and email address. The Defense Logistics Agency, Redstone Arsenal, Alabama, proposes to acquire multiple items through the contract life (FY 2029) for the new procurement of the Target Acquisition System (TAS) 2.8 2nd Generation, TAS 2.8 HD Longwave, and the re?pricing effort of a current, firm?fixed price, indefinite delivery requirements type contract for the Improved Bradley Acquisition Subsystem (IBAS) in support of the US Army Aviation and Missile Life Cycle Management Command (AMCOM) and the US Army Tank? Automotive & Armaments Command (TACOM). See attached list for parts to be to be re?repriced and added to this long?term contract. These items are restricted to: DRS Network & Imaging Systems, Inc. CAGE 32865. These items must be acquired, for the first time, directly from the actual manufacturer OR acquired, for the second or subsequent time, directly from the actual manufacturer. As a result, this acquisition is currently being procured under Federal Acquisition Regulation (FAR) 6.302?1(a)(2) having only a limited number of responsible sources. All offerors must meet prequalification requirements in order to be eligible for award. Firms that recognize and can produce the required item described above are encouraged to identify themselves. Firms are encouraged to seek source approval in order to compete for future efforts by emailing inquiries to: usarmy.redstone.devcom?avmc.mbx.amr?m?sar@mail.mil. The closing date annotated is an estimated date and may be adjusted dependent upon the date of release for solicitation; however, the solicitation will not close prior to the date stated above. Foreign Firms are reminded that all requests for solicitation must be processed through their respective embassies. PROCUREMENT CONSISTS OF TWO OR MORE REQUIREMENTS FOR SUPPLIES, BASED ON FORECASTED DEMANDS. THE GOVERNMENT RESERVES THE RIGHT TO AMEND &/OR CANCEL THIS PROCUREMENT, PARTIALLY OR IN ENTIRETY BEFORE AWARD. IN THE EVENT THE GOVERNMENT CANCELS THIS ACQUISITION BEFORE AWARD, THE GOVERNMENT HAS NO OBLIGATION TO REIMBURSE OFFEROR BEFORE ANY COSTS. THIS ACQUISITION MAY CONTAIN TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, USC., SEC 2751 ET SEQ) OR THE EXPORT ADMINISTRATION ACT (TITLE 50, USC., APP 2401?2402) EXECUTIVE ORDER 12470. ARMS EXPORT INFORMATION CANNOT BE RELEASED OUTSIDE THE UNITED STATES WITHOUT PRIOR APPROVAL OF THE GOVERNMENT. THIS ACQUISITION MAY CONTAIN DATA WHICH IS CONSIDERED CRITICAL TECHNOLOGY AND HAS BEEN RESTRICTED FOR RELEASE OUTSIDE OF THE UNITED STATES. RESTRICTED INFORMATION CAN NOT BE RELEASED OUTSIDE THE UNITED STATES WITHOUT PRIOR APPROVAL OF THE GOVERNMENT. The SAM.GOV website will be used to issue the solicitation, amendments or any other information concerning the solicitation.