Inactive Total Small Business Set-Aside (FAR 19.5)

Amendment 0002 for RFP SPRRA2-22-R-0009 is to change the following: Extend the closing date and time FROM 4:00 PM Central Daylight Time (CDT), January 20, 2022 TO 4:00 PM Central Daylight Time (CDT), ... Amendment 0002 for RFP SPRRA2-22-R-0009 is to change the following: Extend the closing date and time FROM 4:00 PM Central Daylight Time (CDT), January 20, 2022 TO 4:00 PM Central Daylight Time (CDT), January 28, 2022. All other terms and conditions remain unchanged. The purpose of Amendment 0001 for RFP SPRRA2-22-R-0009 is to change the following: 1. Add the sentence into the second paragraph of the letter RFP. “This is the fair opportunity for ATAP Inc., Boneal Inc., and Parts and Repair Services Inc. to compete for the annual catalog IAW FAR 16.505(b).” 2. Delete the sentence “These add-ons are authorized pursuant to DLAD 52.216-9006 “Addition/Deletion of Items” as well as Section 4.12.2 Annual demand Planning section of the Performance Work Statement and Section H-2.A.2 of Section H that was included in solicitation SPRRA2-20-R-0027.” 3. Add the sentence “These add-ons are authorized pursuant to DLAD 52.216-9006 “Addition/Deletion of Items” as well as Section 4.12.3 of the Performance Work Statement and Section H-2.A.2 of Section H that was included in Contracts SPRRA2-21-D-0006 (Boneal, Inc), SPRRA2-21-D-0007 (ATAP, Inc) and SPRRA2-21-D-0008 (Parts and Repair Technical Services, Inc). 4. Extend the closing date and time FROM 4:00 PM Central Daylight Time (CDT), December 30, 2021 TO 4:00 PM Central Daylight Time (CDT), January 20, 2022. 5. All other terms and conditions remain unchanged. Solicitation Number: SPRRA2-22-R-0009 Posting Date: November 30, 2021 Response Date: December 30, 2021 Response Time: 4:00 PM CST NAICS Code: 336419; Other Guided Missile and Space Vehicle Parts and Auxiliary Equipment Manufacturing Place of Performance: CONUS, United States Set Aside: Total Small Business Set Aside (100% Small Business Set Aside) GENERAL INFORMATION: The Defense Logistics Agency (DLA), Aviation Division in Huntsville, AL is looking to perform the first annual NSN pricing for the EXISTING Third Party Logistics (3PL) NSN Multiple Award Indefinite Delivery/Indefinite Quantity (IDIQ) contract catalogs. These NSNs are for low demand low dollar supplies to support various military commands. These components are necessary to ensure the combat readiness of US Military forces. A total of 26 NSNs are targeted to be repriced under this requirement. THIS REQUIREMENT IS OPEN TO EXISTING DLA HUNTSVILLE, AL THIRD PARTY LOGISTICS SUPPORT CONTRACTORS ONLY. PROPOSALS FROM SOURCES NOT CURRENTLY A 3PL IDIQ CONTRACTOR SHALL NOT BE ACCEPTED. The Technical Data Packages (TDPs) will be made available via a secure website when the Request for Proposals is issued. LOCATION: Work under this requirement shall be at the Contractor(s) office. Delivery of any ordered NSNs shall be to DLA warehouses located in the Contiguous United States. DLA does not anticipate any NSNs to be delivered outside the Contiguous United States. The existing DLA Huntsville 3PL IDIQ Contractors must be able to provide all labor, materials, facilities, and equipment for performance of the 3PL requirements specified in the issued 3PL contracts and any issued delivery orders. The DLA Huntsville 3PL Contractors shall be cognizant of all applicable laws, regulations and guidance associated with the work being accomplished, and ensuring that all work activities performed by contractor personnel, subcontractors and suppliers is executed as required by the applicable laws and regulations. BASIS FOR AWARD: This requirement shall be competed on a restricted basis to existing DLA Huntsville 3PL IDIQ Contractors only. The Government has provided the 26 items for existing 3PL Contractors to price in a separate Excel spreadsheet. Each offeror must submit a price for a minimum of 60% of the items (15 items). Of the 26 NSNs, the Government has identified 5 NSNs that all Offerors are required to submit pricing on. These required 5 NSNs shall be included in the 60% minimum discussed above. Offerors submitting a price for less than 60% (15) of the items, or not include pricing of the mandatory 5 items, may cause their proposal to be noncompliant with the terms of the RFP and determined to be unacceptable and not eligible for award. The individual NSNs shall be awarded to the Contractor that provides the best value to the Government via trade off analysis using FAR Part 15 best value tradeoff method. Award(s) shall be made on the basis of past performance and price. The Past Performance Factor is significantly more important than the Price Factor. SUBMISSION REQUIREMENTS: The DLA Huntsville 3PL IDIQ Contractors must have a current System for Award Management (SAM) registration prior to submission of proposals. The solicitation shall be issued in electronic format only. Paper copies of this solicitation will not be available. Other methods of requesting this solicitation shall not be honored. The solicitation shall be posted to the System for Award Management (SAM) website at SAM.Gov and is available to the DLA Huntsville 3PL IDIQ Contractors without charge. Contractors can search for the solicitation by the solicitation number. It is the Contractor’s responsibility to check the internet address provided as necessary for any posted changes to this pre-solicitation notice, the solicitation posting, and any issued solicitation amendments. All questions shall be forwarded to the Points of contact denoted below in writing. No questions shall be answered telephonically. Product line cards, statements of capability, or other promotional information packages shall not be accepted. POINTS OF CONTACT: Mr. Michael Romine (Contract Specialist) michael.1.romine@dla.mil Mr. Charles Ivy (Contract Specialist) charles.ivy@dla.mil Mr. Jean Paul Bretz (Contracting Officer) Jean.Bretz@dla.mil THIS ACQUISITION CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, USC., SEC 2751 ET SEQ) OR THE EXPORT ADMINISTRATION ACT (TITLE 50, USC., APP 2401-2402) EXECUTIVE ORDER 12470. THIS INFORMATION CANNOT BE RELEASED OUTSIDE THE UNTIED STATES WITHOUT PRIOR APPROVAL OF THE GOVERNMENT. THIS ACQUISITION CONTAINS DATA WHICH IS CONSIDERED CRITICAL TECHNOLOGY AND HAS BEEN RESTRICTED FOR RELEASE OUTSIDE OF THE UNITED STATES. THIS INFORMATION CANNOT BE RELEASED OUTSIDE THE UNITED STATES WITHOUT APPROVAL OF THE GOVERNMENT.

Inactive

THERE IS NO SOLICITATION AVAILABLE AT THIS TIME. REQUEST FOR A SOLICITATION WILL NOT RECEIVE A RESPONSE. This Sources Sought Synopsis (SSS) is in support of Market Research being conducted by the Defe... THERE IS NO SOLICITATION AVAILABLE AT THIS TIME. REQUEST FOR A SOLICITATION WILL NOT RECEIVE A RESPONSE. This Sources Sought Synopsis (SSS) is in support of Market Research being conducted by the Defense Logistics Agency to identify potential manufacturing/supply sources, and if future efforts can be competitive or Set Aside for Small Business. The proposed North American Industry Classification Systems (NAICS) Code is 336419 which has a corresponding Size Standard of 1,000 employees. This SSS is to notify companies that the Defense Logistics Agency, Redstone Arsenal, Alabama, is seeking qualified sources for the acquisition of the NSNs as described on Attachment 0001. The Government has rights to the technical data, the data package is complete, and there are no technical data, engineering, tooling and or manufacturing restrictions. As a result, this acquisition is currently being procured under Federal Acquisition Regulation (FAR) 15.101-1 and 15.3 as supplemented by the DoD Source Selection Procedures referenced in DFARS 215.300 to make a best value award decision. The Government is interested in all businesses to include 8(a), small business and small disadvantaged business, Service-Disabled Veteran-Owned, Hubzone, and Women-Owned small business concerns. All contractors must meet prequalification requirements to be registered as a potential source. Firms that possess the ability and can produce the required item(s) described above are encouraged to identify themselves. Contractors are encouraged to seek source approval to compete for future solicitations by accessing the website: https://www.avmc.army.mil/Directorates/SRD/SAR/ then click on AMCOM Spare Parts Manufacturer or Distributor SAR. The contractor shall be capable of successfully performing and complying with all special requirements in accordance with the terms and conditions set forth in the solicitation annotated above, at the unit prices established at time of a contract award. The contractor will be responsible for recurring and nonrecurring engineering services associated with becoming a qualified source. The contractor will also be responsible for all aspects of the manufacturing/production process, including but not limited to supply chain management, logistics, forecasting of parts, long-lead parts procurement, material forecasting, obsolescence issues and final delivery of assets as well as any and all additional costs incurred resulting from contract performance. The Government is also interested in small business companies that have electronic Data Exchange (EDE) capabilities. NO HARD COPY OR FACSIMILE SUBMISSIONS WILL BE ACCEPTED. Cover letters and extraneous materials (brochures, etc.) will not be considered. Questions concerning submissions should be directed to Mr. Jean Paul Bretz at jean.bretz@dla.mil and copied to Mr. Michael Romine michael.1.romine@dla.mil and Mr. Charles Ivy at charles.ivy@dla.mil . CLOSING DATE AND TIME: The closing date and time for this Sources Sought Synopsis is 4:00 PM CST on Friday 19 November 2021. Responses to this announcement are due on this closing date and time. DISCLAIMER: THIS SSS IS ISSUED SOLELY FOR INFORMATIONAL AND PLANNING PURPOSES. IT DOES NOT CONSTITUTE A SOLICITATION (REQUEST FOR PROPOSAL OR REQUEST FOR QUOTATION) OR A PROMISE TO ISSUE A SOLICITATION IN THE FUTURE AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY. WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751 ET SEQ.) OR EXECUTIVE ORDER 12470. VIOLATION OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.