Inactive

October 25, 2021 Raytheon Company 350 Lowell Street, Andover, MA 01810 RE: Letter Request for Proposal SPRRA2-21-R-0041 Mr. Sean Penney, The Defense Logistics Agency (DLA) wishes to add the NSNs liste... October 25, 2021 Raytheon Company 350 Lowell Street, Andover, MA 01810 RE: Letter Request for Proposal SPRRA2-21-R-0041 Mr. Sean Penney, The Defense Logistics Agency (DLA) wishes to add the NSNs listed in enclosure 1 to the DLA-Raytheon Depot Level Repairable (DLR) contract SPRBL1-15-D-0017. The NSNs will support the Patriot Missile System. This add-on will add a total of two NSNs listed in enclosure 1, of which two will be priced. DLA Contracting Team Identification: Lindsey Schuman, DLA Aberdeen Primary Procuring Contracting Officer E-mail: Lindsey.Schuman@dla.mil, Phone: (443) 861-4526 Justine Kirk, DLA Aviation- Huntsville Contracting Officer E-mail: justine.kirk@dla.mil, Phone: (256) 690-5424 Michael Ellison, DLA Aviation- Huntsville Contract Specialist E-mail: michael.ellison@dla.mil, Phone: (256) 690-5751 A. Please adhere to the following timelines: 1. Indicate your intention to provide a responsive add-on proposal to this RFP in writing within five (5) business days. It is requested that a negative response be accompanied by an explanation. Responses shall be provided to the contracting team identified above. 2. Your response is requested as soon as possible. If you choose to submit an add-on proposal, it shall be submitted before 4:00 p.m. Central Standard Time (CST), November 30, 2021. B. Instructions: 1. The negotiated contract (SPRBL1-15-D-0017) shall govern the Contractor’s and Government’s rights and obligations. 2. Contract clauses are governed by the basic agreement. No alternate or additional clauses shall be submitted with this proposal. Clause suggestions will flow through the Raytheon IDIQ Service Center representative managing this contract to the Primary Procuring Contracting Officer. Raytheon can propose alternate terms and conditions as assumptions to their proposal. 3. This RFP is not an authorization to start work. 4. Please ensure that you read the entire RFP, including all of the enclosures, prior to submitting your proposal. Your proposal shall be in full compliance with the instructions of this RFP. 5. The Proposal must provide a range covering the Min, Mid, Max Quantities while also proposing and certifying to each year’s Best Estimated Quantity (BEQ), which is determined as the highest priced alternative to the Government, per FAR 1.108 and shall be used for Total Proposed Price evaluation. 6. Your proposal shall remain valid for a minimum of one hundred and eighty (180) days from receipt by the government. C. Proposal Content/Cost/Price Supporting Documentation. At a minimum your proposal shall include the following: 1. The Government contemplates Firm-Fixed-Pricing for these add-on items in accordance with the overarching basic contract, and requests pricing for four (4) years. This is an RFP for two NSNs to support requirements generated by the Army Contracting Center (ACC) for the Lower Tier Project Office (LTPO) used on the Patriot Missile System. The add-on Identification of Requirements (IOR) and Packaging Sheets are provided in enclosure 1 and 2 respectively. 2. The offeror shall prepare one summary schedule as provided in Enclosure 5, Patriot Missile System Add-On Schedule of Supplies in a Microsoft Excel file (Cost.xls) utilizing the specific headers provided within. The offeror’s summary schedule shall provide the contract line item numbers (CLINs), National Stock Numbers (NSNs) to record the total overall price offered and applicable tabs within Enclosure 5. Along with the summary schedule, the offeror shall provide fully supportable cost data which substantiates the offeror’s summary schedule for all CLINs and all ranges. Submission must include working excel formulas. Submission shall be in accordance with FAR 15.408, Table 15-2, Instructions for Submitting Cost/Price Proposals When Certified Cost or Pricing Data are required. Back up documentation shall detail the labor categories to be used, labor hours proposed by category, material and equipment cost, and a total cost breakdown. The offeror shall also provide supporting cost/price documentation for all proposed subcontractors, to include the proposed type of subcontract. a. To comply with this solicitation, the offeror is required to price the following Ordering Periods (OP9 - OP12): 1 January 2022 through 26 September 2025. b. Per FAR 15.408 Table 15-2, cost analyses must be performed by the offeror for subcontracts identified in the Consolidated Bill of Materials as having total proposed pricing that exceeds the regulatory threshold indicated in FAR Part 15.403-4 for each year’s BEQ only. Fair and reasonable subcontractor analysis in accordance with FAR 15.404-3(b) Subcontract Pricing Considerations shall be provided for each year’s BEQ only. c. The government did not provide separate Subcontract Line Item Numbers (SLINs) to accommodate items that may require reusable shipping containers. However, if an item requires a reusable shipping container, a SLIN may be added to allow the offeror to price the item with a shipping container. The offeror shall propose the most expeditious delivery schedule for each item. d. A sanitized cost break-down (no cost information, no rates/dollars) shall also be provided in a Microsoft Excel File. e. In support of the proposed Indirect Expense Rates, RTN, IOTs and its subcontractor(s) shall provide documentation of the most recent Indirect Expense Rates, to include, at least one of the following (A, B, or C): A. Forward Pricing Rate Agreements (FPRAs) with DCAA or DCMA B. Forward Pricing Rate Recommendations (FPRR) from DCAA or DCMA C. Forward Pricing Rate Proposal (FPRP), Approved Provisional Rates Proposal or other statement of current rates including three (3) to four (4) years of Incurred Cost Submissions to DCAA detailing pools and bases (by expense accounts) information which validates the calculations or three (3) to four (4) years historical actual detailing pools and bases (by expense accounts) information which validates the calculations. Note: The rates reflected in the FPRA, FPRR, FPRP, Approved Provisional Rates Proposal or other statement of current rates shall directly match the proposed rates as detailed in the proposal. If the rates do not match, the offeror shall provide sufficient detail explaining how the proposed rates are realistic. f. Identify key business unit personnel related to contracting, technical and pricing questions and known DCMA or DCAA business unit points of contact (POC’s) to expedite the question/review process. g. In accordance with FAR clause 52.215-22, Limitation on Pass-Through Charges, if Raytheon intends to subcontract more than 70 percent of the total cost of work to be performed under the resulting add-on, Raytheon shall identify in its proposal a description of the value-added provided by Raytheon as related to the work to be performed by the subcontractor(s) as defined by FAR clause 52.215-23. h. In accordance with the Section H, Add/Delete Process of basic contract SPRBL1- 15-D-0017, “within 14 days of proposal submission to the government under the Add/Delete process, Raytheon shall complete an evaluation of the Add-on population Bill of Materials (BOM). Additionally, they shall evaluate the Add-on population BOM against the current contract BOM for the same system, if parts for that system are currently on contract. If commonalities occur, Raytheon shall provide a market pricing cost report.” i. Raytheon shall assert restrictions on technical data or software as required; when Raytheon shall deliver with less than Unlimited Rights IAW DFARS 252.227- 7017, Enclosure 4. j. Raytheon shall identify and address in its proposal all actual or potential Organizational Conflicts of Interests (OCIs), per FAR 9.5, or state that there are no known potential OCIs. If any actual or potential OCIs are identified, then Raytheon shall submit a mitigation plan. k. All communications SHALL be submitted in writing ONLY AND directly to the contract specialist email address identified on the first page of this RFP. Raytheon shall not contact any other Government personnel other than the person(s) identified above. Contacting any Government personnel other than the individual(s) identified above could result in an organizational conflict of interest (OCI). l. No assumptions, terms, conditions, caveats or exceptions submitted within your proposal, in response to this RFP, will be accepted or incorporated into the basic contract. All assumptions shall be addressed and/or resolved through the use of the question and answer period. m. Raytheon shall submit their Small Business Plan with their proposal as a separate document SBxxxx.doc. This enclosure will be used to ensure Raytheon is on track to meet the goals established in the base contract. If you have any questions, feel free to contact Michael Ellison at Michael.ellison@dla.mil or phone (256) 690-5751.

Inactive

Updated Sources Sought Class Code: 44,59 NAICS Code: 333994, 334412 Subject: Compressor, Dehydrator/ Circuit Card Assembly - See the first paragraph of this Government requirement for the person to co... Updated Sources Sought Class Code: 44,59 NAICS Code: 333994, 334412 Subject: Compressor, Dehydrator/ Circuit Card Assembly - See the first paragraph of this Government requirement for the person to contact. PRON Number: N/A Set Aside Code: N/A Response Date: (MM) (DD) (YYYY) 3 days Place of Performance: Description: THERE IS NO SOLICITATION AVAILABLE AT THIS TIME. REQUEST FOR A SOLICITATION WILL NOT RECEIVE A RESPONSE. This Sources Sought Synopsis (SSS) is in support of Market Research being conducted by the Defense Logistics Agency to identify potential manufacturing/supply sources, and if future efforts can be competitive or Set Aside for Small Business. The proposed North American Industry Classification Systems (NAICS) Code is 333994/ 334412 which has a corresponding Size Standard of 500/750 employees. This SSS is to notify companies that the Defense Logistics Agency, Redstone Arsenal, Alabama, is seeking qualified sources for the acquisition of 2 NSNs: COMPRESSOR, NSN: 4440-01-388-5626, Part Number: 11474244 and CIRCUIT CARD ASSEMBLY, NSN: 5998-01-650-1441, Part Number: 13661166-3 in support of the Patriot weapon system. NSN: 4440-01-388-5626 part must be acquired from a manufacturing source(s) specified on a source control or selected item drawing as defined by the current version of DoD-STD-100. NSN: 5998-01-650-1441 part requires engineering source approval by the design control activity in order to maintain the quality of the part. As a result, this acquisition is currently being procured under Federal Acquisition Regulation (FAR) 6.302-1(a)(2) having only a limited number of responsible sources. The Government is interested in all businesses to include 8(a), small business and small disadvantaged business, Service-Disabled Veteran-Owned, Hubzone, and Women-Owned small business concerns. All contractors must meet prequalification requirements in order to be registered as a potential source. Firms that possess the ability and can produce the required item(s) described above are encouraged to identify themselves. Contractors are encouraged to seek source approval in order to compete for future solicitations by accessing the website: https://www.avmc.army.mil/Directorates/SRD/SAR/ then click on AMCOM Spare Parts Manufacturer or Distributor SAR. The contractor shall be capable of successfully performing and complying with any and all special requirements in accordance with the terms and conditions set forth in the solicitation annotated above, at the unit prices established at time of a contract award. The contractor will be responsible for recurring and nonrecurring engineering services associated with becoming a qualified source. The contractor will also be responsible for all aspects of the manufacturing/production process, including but not limited to: supply chain management, logistics, forecasting of parts, long-lead parts procurement, material forecasting, obsolescence issues and final delivery of assets as well as any and all additional costs incurred resulting from contract performance. DISCLAIMER: THIS SSS IS ISSUED SOLELY FOR INFORMATIONAL AND PLANNING PURPOSES. IT DOES NOT CONSTITUTE A SOLICITATION (REQUEST FOR PROPOSAL OR REQUEST FOR QUOTATION) OR A PROMISE TO ISSUE A SOLICITATION IN THE FUTURE AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY. NSN: 4440-01-388-5626 - WARNING! THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT. NSN: 5998-01-650-1441 - WARNING! DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT. - WARNING! THIS TDPL INDICATES DOCUMENTATION THAT IS CLASSIFIED

Inactive

Class Code: 44,59 NAICS Code: 333994, 334412 Subject: Compressor, Dehydrator/ Circuit Card Assembly - See the first paragraph of this Government requirement for the person to contact. Solicitation Num... Class Code: 44,59 NAICS Code: 333994, 334412 Subject: Compressor, Dehydrator/ Circuit Card Assembly - See the first paragraph of this Government requirement for the person to contact. Solicitation Number: SPRRA2-21-R-0041 Set Aside Code: N/A Response Date: (MM) (DD) (YYYY) 15 days Description: No telephone requests will be accepted. Direct your requests and communication to: ATTN: DLA-AHCA, Michael Ellison, Contract Specialist, via email michael.ellison @dla.mil. For request for solicitation, in the email subject line enter SPRRA2-21-R-0041, provide your name, the company name, Cage Code and a telephone/facsimile number. PRON: D11H0044D1. The Department of Defense, Defense Logistics Agency – Missile proposes to acquire, on a 3 Year Firm Fixed Price (FFP) Indefinite Delivery Indefinite Quantity (IDIQ) contract for a minimum quantity of 20 each up to 50 maximum of COMPRESSOR, DEHYDRATOR, NSN: 4440-01-388-5626, Part Number: 11474244 applicable to the Patriot weapon system. The estimated Production Lead Time (PLT) without First Article Testing is 720 Days After Contract Award (DACA) with deliveries to Fort Bliss, TX 79916-5801. PRON: D11H0043D1. The Department of Defense, Defense Logistics Agency – Missile proposes to acquire, on a 5 Year Firm Fixed Price (FFP) Indefinite Delivery Indefinite Quantity (IDIQ) contract for a minimum quantity of 30 each up to 70 maximum of CIRCUIT CARD ASSEMBLY, NSN: 5998-01-091-4919, Part Number: 11437446 applicable to the Patriot weapon system. The estimated Production Lead Time (PLT) without First Article Testing is 720 Days After Contract Award (DACA) with deliveries to Fort Bliss, TX 79916-5801. This item is restricted to: Raytheon Company: 05716 NSN: 4440-01-388-5626--This part must be acquired from a manufacturing source(s) specified on a source control or selected item drawing as defined by the current version of DoD-STD-100. As a result, this acquisition is currently being procured under Federal Acquisition Regulation (FAR) 6.302-1(a)(2) having only a limited number of responsible sources. NSN: 5998-01-091-4919--Manufacture of this part requires special test and/or inspection facilities to determine and maintain ultra-precision quality for its function or system integrity. All offerors must meet prequalification requirements in order to be eligible for award. Firms that recognize and can produce the required item described above are encouraged to identify themselves. Firms are encouraged to seek source approval in order to compete for future solicitations by accessing the website: https://www.avmc.army.mil/Directorates/SRD/SAR/ and looking under Standardized Aviation and Missile Source Approval Request (SAMSAR). The closing date annotated is an estimated date and may be adjusted dependent upon the date of release for solicitation; however, the solicitation will not close prior to the date stated above. Foreign Firms are reminded that all requests for solicitation must be processed through their respective embassies. NSN: 4440-01-388-5626 - WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT.