Inactive

Amendment 0002 to RFP SPRRA2-21-R-0013 The purpose of amendment 0002 to Letter Request for Proposal SPRRA2-21-R-0013 released on 23 February 2021 and due on 30 April 2021 is to update the bid points o... Amendment 0002 to RFP SPRRA2-21-R-0013 The purpose of amendment 0002 to Letter Request for Proposal SPRRA2-21-R-0013 released on 23 February 2021 and due on 30 April 2021 is to update the bid points of the RFP. The Government would like Raytheon to please provide a range covering the Min, Mid and Max Quantities while also proposing and certifying to the Best Estimated Quantities (BEQ) attached in Enclosure 1. Amendment 0001 to RFP SPRRA2-21-R-0013 The purpose of this amendment to Letter Request for Proposal SPRRA2-21-R-0013 released on 23 February 2021 and due on 30 April 2021 is to address the concerns with the bid points. The Government would like Raytheon to please provide a range covering the Min and Max Quantities while also proposing and certifying to the Best Estimated Quantities (BEQ) attached in Enclosure 1. DLA AHCA February 23, 2021 Raytheon Company 350 Lowell Street, Andover, MA 01810 RE: Letter Request for Proposal SPRRA2-21-R-0013 Mr. Sean Penney, The Defense Logistics Agency (DLA) wishes to add the NSNs listed in enclosure 1 to the DLA-Raytheon Depot Level Repairable (DLR) contract SPRBL1-15-D-0017. The NSNs will support the Patriot Missile System. The add-on is authorized pursuant to DLAD 52.216-9006 “Addition/Deletion of Items” as well as the scope statement that was included in solicitation SPRBL1-14-R-0031. This add-on will add a total of twenty-six NSNs listed in enclosure 1, of which twenty-six will be priced. DLA Contracting Team Identification: Lindsey Schuman, DLA Aberdeen Primary Procuring Contracting Officer E-mail: Lindsey.Schuman@dla.mil, Phone: (443) 861-4526 Justine Kirk, DLA Aviation- Huntsville Contracting Officer E-mail: justine.kirk@dla.mil, Phone: (256) 690-5424 Michael Ellison, DLA Aviation- Huntsville Contract Specialist E-mail: michael.ellison@dla.mil, Phone: (256) 690-5751 A. Please adhere to the following timelines: 1. Indicate your intention to provide a responsive add-on proposal to this RFP in writing within five (5) business days. It is requested that a negative response be accompanied by an explanation. Responses shall be provided to the contracting team identified above. 2. Your response is requested as soon as possible. If you choose to submit an add-on proposal, it shall be submitted before 4:00 p.m. Central Standard Time (CST), April 30, 2021. B. Instructions: 1. The negotiated contract (SPRBL1-15-D-0017) shall govern the Contractor’s and Government’s rights and obligations. 2. Contract clauses are governed by the basic agreement. No alternate or additional clauses shall be submitted with this proposal. Clause suggestions will flow through the Raytheon IDIQ Service Center representative managing this contract to the Primary Procuring Contracting Officer. Raytheon can propose alternate terms and conditions as assumptions to their proposal. 3. This RFP is not an authorization to start work. 4. Please ensure that you read the entire RFP, including all of the enclosures, prior to submitting your proposal. Your proposal shall be in full compliance with the instructions of this RFP. 5. The Proposal must be certified to the 3 Year Best Estimated Quantity (BEQ), which is determined as the highest priced alternative to the Government, per FAR 1.108 and shall be used for Total Proposed Price evaluation. 6. Your proposal shall remain valid for a minimum of one hundred and eighty (180) days from receipt by the government. C. Proposal Content/Cost/Price Supporting Documentation. At a minimum your proposal shall include the following: 1. The Government contemplates Firm-Fixed-Pricing for these add-on items in accordance with the overarching basic contract, and requests pricing for three (3) years. This is an RFP for NSN support requirements generated by the Army Contracting Center (ACC) for the Lower Tier Project Office (LTPO) used on the Patriot Missile System. The add-on Identification of Requirements (IOR) and Packaging Sheets are provided in enclosure 1 and 2 respectively. 2. The offeror shall prepare one summary schedule as provided in Enclosure 5, Patriot Missile System Add-On Schedule of Supplies in a Microsoft Excel file (Cost.xls) utilizing the specific headers provided within. The offeror’s summary schedule shall provide the contract line item numbers (CLINs), National Stock Numbers (NSNs) to record the total overall price offered and applicable tabs within Enclosure 5. Along with the summary schedule, the offeror shall provide fully supportable cost data which substantiates the offeror’s summary schedule for all CLINs and all ranges. Submission must include working excel formulas. Submission shall be in accordance with FAR 15.408, Table 15-2, Instructions for Submitting Cost/Price Proposals When Certified Cost or Pricing Data are required. Back up documentation shall detail the labor categories to be used, labor hours proposed by category, material and equipment cost, and a total cost breakdown. The offeror shall also provide supporting cost/price documentation for all proposed subcontractors, to include the proposed type of subcontract. a. To comply with this solicitation, the offeror is required to price the following Calendar Years: Calendar Year 2021 through Calendar Year 2023. b. Per FAR 15.408 Table 15-2, cost analyses must be performed by the offeror for subcontracts identified in the Consolidated Bill of Materials as having total proposed pricing that exceeds the regulatory threshold indicated in FAR Part 15.403-4 for the 3 Year BEQ only. Fair and reasonable subcontractor analysis in accordance with FAR 15.404-3(b) Subcontract Pricing Considerations shall be provided for the 3 year BEQ only. c. The government did not provide separate Subcontract Line Item Numbers (SLINs) to accommodate items that may require reusable shipping containers. However, if an item requires a reusable shipping container, a SLIN may be added to allow the offeror to price the item with a shipping container. The offeror shall propose the most expeditious delivery schedule for each item. d. A sanitized cost break-down (no cost information, no rates/dollars) shall also be provided in a Microsoft Excel File. e. In support of the proposed Indirect Expense Rates, RTN, IOTs and its subcontractor(s) shall provide documentation of the most recent Indirect Expense Rates, to include, at least one of the following (A, B, or C): A. Forward Pricing Rate Aagreements (FPRAs) with DCAA or DCMA B. Forward Pricing Rate Recommendations (FPRR) from DCAA or DCMA C. Forward Pricing Rate Proposal (FPRP), Approved Provisional Rates Proposal or other statement of current rates including three (3) years of Incurred Cost Submissions to DCAA detailing pools and bases (by expense accounts) information which validates the calculations or Three (3) years historical actual detailing pools and bases (by expense accounts) information which validates the calculations. Note: The rates reflected in the FPRA, FPRR, FPRP, Approved Provisional Rates Proposal or other statement of current rates shall directly match the proposed rates as detailed in the proposal. If the rates do not match, the offeror shall provide sufficient detail explaining how the proposed rates are realistic. f. Identify key business unit personnel related to contracting, technical and pricing questions and known DCMA or DCAA business unit points of contact (POC’s) to expedite the question/review process. g. In accordance with FAR clause 52.215-22, Limitation on Pass-Through Charges, if Raytheon intends to subcontract more than 70 percent of the total cost of work to be performed under the resulting add-on, Raytheon shall identify in its proposal a description of the value-added provided by Raytheon as related to the work to be performed by the subcontractor(s) as defined by FAR clause 52.215-23. h. In accordance with the Section H, Add/Delete Process of basic contract SPRBL1- 15-D-0017, “within 14 days of proposal submission to the government under the Add/Delete process, Raytheon shall complete an evaluation of the Add-on population Bill of Materials (BOM). Additionally, they shall evaluate the Add-on population BOM against the current contract BOM for the same system, if parts for that system are currently on contract. If commonalities occur, Raytheon shall provide a market pricing cost report.” i. Raytheon shall assert restrictions on technical data or software as required; when Raytheon shall deliver with less than Unlimited Rights IAW DFARS 252.227- 7017, Enclosure 4. j. Raytheon shall identify and address in its proposal all actual or potential Organizational Conflicts of Interests (OCIs), per FAR 9.5, or state that there are no known potential OCIs. If any actual or potential OCIs are identified, then Raytheon shall submit a mitigation plan. k. All communications SHALL be submitted in writing ONLY AND directly to the contract specialist email address identified on the first page of this RFP. Raytheon shall not contact any other Government personnel other than the person(s) identified above. Contacting any Government personnel other than the individual(s) identified above could result in an organizational conflict of interest (OCI). l. No assumptions, terms, conditions, caveats or exceptions submitted within your proposal, in response to this RFP, will be accepted or incorporated into the basic contract. All assumptions shall be addressed and/or resolved through the use of the question and answer period. m. Raytheon shall submit their Small Business Plan with their proposal as a separate document SBxxxx.doc. This enclosure will be used to ensure Raytheon is on track to meet the goals established in the base contract. If you have any questions, feel free to contact Michael Ellison at Michael.ellison@dla.mil or phone (256) 690-5751.

Inactive

FedBizOps Synopsis Class Code: 59 NAICS Code: See attachment Subject: See attachment Solicitation Number: SPRRA2-21-R-0013 Set Aside Code: N/A Response Date: (MM) (DD) (YYYY) 15 days Description: No t... FedBizOps Synopsis Class Code: 59 NAICS Code: See attachment Subject: See attachment Solicitation Number: SPRRA2-21-R-0013 Set Aside Code: N/A Response Date: (MM) (DD) (YYYY) 15 days Description: No telephone requests will be accepted. Direct your requests and communication to: ATTN: DLA-AHCA, Michael Ellison, Contract Specialist, via email michael.ellison @dla.mil. This agency proposes to issue a solicitation for a long-term strategic/sole source contract which will include multiple NSNs to support the Patriot Missile weapon systems. A total of thirty-three (33) NSNs are targeted for this contract effort. It is anticipated that all thirty-four (34) NSNs will be priced for the initial contract award. The proposed sole source action will be issued to the Raytheon Company, Contractor and Government Entity (CAGE): 05716 and is intended to be on a sole source basis as supported by a J&A IAW FAR 6.302-1 "Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements". Items provided by the following Raytheon CAGE Codes are covered by this acquisition: 18876; 55717; 05716; 15090; 37695; 96214; 072E5; 2M191; 38150; 4U884; 7Y193; 00724; 06845; 49956; 5D832; and 9F358. The excel document with all the NSNs is attached to this file.The proposed requirement will be for a total of two calendar (2) years period of performance. The existing contract is a firm fixed price (FFP) corporate Indefinite- Delivery Indefinite-Quantity (IDIQ) contract. The attached list of NSNs are the items that have been identified for this current action. The remaining ordering periods are 7, 8, 9, 10, and 11. The letters expressing interest in subcontracting provided to the contracting officer will be forwarded to the identified OEM. This is proposed to be a FAR 15 effort. If other NSNs are subsequently added, as defined by the terms of the contract, they will be synopsized separately. These items are being added to contract SPRBL1-15-D-0017, awarded to Raytheon Cage: 05716 in accordance with the originally approved J&A. However, the NSNs identified here were not included in the initial synopsis for the corporate contract. There are five (5) years remaining on this contract. The contract requires supply of parts, as well as other functions including but not limited to inventory management, forecasting, distribution, storage, reliability improvements, engineering maintenance and design control affecting these parts.