Inactive

No telephone requests will be accepted. Direct your requests and communication to: DLA-AHAB, Keary O’Flaherty, Contract Specialist, via email keary.1.oflaherty@dla.mil. For request for solicitation, p... No telephone requests will be accepted. Direct your requests and communication to: DLA-AHAB, Keary O’Flaherty, Contract Specialist, via email keary.1.oflaherty@dla.mil. For request for solicitation, provide your name, the company name and cage code and a telephone number. PRON: AX2C0497AX. The Government proposes to acquire, on a five-year Indefinite Delivery, Indefinite Quantity (IDIQ) contract, a minimum quantity of 15 each up to 135 each maximum of a SPRAG CLUTCH ASSEMBLY; NSN: 1615-01-305-6943; Part Numbers: 107DS214-8 (Boeing CAGE 77272) or CL-40093-7-22 (Formsprag CAGE 91422) applicable to the BK CH-47 (Chinook) weapon system. Item is a flight critical safety item. First Article Testing is Required. Non-Approved Sources require Source Approval. Production Lead Time with First Article Testing is 15 each, 915 Days after Contract Award (DACA) to CORPUS CHRISTI, TX, 78419- 5255. Production Lead Time without First Article Testing is 15 each, 610 Days after Contract Award (DACA) to CORPUS CHRISTI, TX, 78419-5255. This item is restricted to: Boeing Co., CAGE CODE: 77272. Formsprag LLC. CAGE CODE: 91422 DRAWINGS ARE NOT AVAILABLE NOR DOES THE GOVERNMENT HAVE ACCESS TO THEM. THIS IS A CODE AND PART NUMBER PURCHASE. THERE WILL BE NO DISTRIBUTION OF DRAWINGS. This item is suitable for competitive acquisition for the second or subsequent time from the indicated approved source(s) of supply. The rights to use the data needed to purchase this part from additional source(s) are not owned by the Government and cannot be purchased, developed, or otherwise obtained. The Government has access to the data but does not own the rights to the data. The rights ownership has been verified through the Project Management Office. There is no cause to contest the ownership of the rights.Reverse engineering is not feasible. This part must be acquired from a manufacturing source (s) specified on a source control or selected item drawing as defined by the current version of DoD-STD-100. All offerors must meet prequalification requirements in order to be eligible for award. Firms that recognize and can produce the required item described above are encouraged to identify themselves. Contractors are encouraged to seek source approval in order to compete for future solicitations by emailing inquiries to: usarmy.redstone.devcom-avmc.mbx.amr-sssar@army.mil. All responsible sources may submit an offer, which shall be considered by the Agency. The closing date annotated is an estimated date and may be adjusted dependent upon the date of release for solicitation; however, the solicitation will not close prior to the date stated above. Foreign Firms are reminded that all requests for solicitation must be processed through their respective embassies.

Inactive

No telephone requests will be accepted. Direct your requests and communication to: DLA-AHAB, Keary O’Flaherty, Contract Specialist, via email keary.1.oflaherty@dla.mil. For request for solicitation, p... No telephone requests will be accepted. Direct your requests and communication to: DLA-AHAB, Keary O’Flaherty, Contract Specialist, via email keary.1.oflaherty@dla.mil. For request for solicitation, provide your name, the company name and cage code and a telephone number. PRON: AX2C0497AX. The Government proposes to acquire, on a five-year Indefinite Delivery, Indefinite Quantity (IDIQ) contract, a minimum quantity of 15 each up to 135 each maximum of a SPRAG CLUTCH ASSEMBLY; NSN: 1615-01-305-6943; Part Numbers: 107DS214-8 (Boeing CAGE 77272) or CL-40093-7-22 (Formsprag CAGE 91422) applicable to the BK CH-47 (Chinook) weapon system. Item is a flight critical safety item. First Article Testing is Required. Non-Approved Sources require Source Approval. Production Lead Time with First Article Testing is 15 each, 915 Days after Contract Award (DACA) to CORPUS CHRISTI, TX, 78419-5255. Production Lead Time without First Article Testing is 15 each, 610 Days after Contract Award (DACA) to CORPUS CHRISTI, TX, 78419-5255. This item is restricted to Boeing Co., CAGE CODE: 77272. Formsprag LLC. CAGE CODE: 91422 This item is suitable for competitive acquisition for the second or subsequent time from the indicated approved source(s) of supply. The rights to use the data needed to purchase this part from additional source(s) are not owned by the Government and cannot be purchased, developed, or otherwise obtained. The Government has access to the data but does not own the rights to the data. The rights ownership has been verified through the Project Management Office. There is no cause to contest the ownership of the rights. Reverse engineering is not feasible. This part must be acquired from a manufacturing source (s) specified on a source control or selected item drawing as defined by the current version of DoD-STD-100. All offerors must meet prequalification requirements in order to be eligible for award. Firms that recognize and can produce the required item described above are encouraged to identify themselves. Contractors are encouraged to seek source approval in order to compete for future solicitations by emailing inquiries to: usarmy.redstone.devcom-avmc.mbx.amr-ss-sar@army.mil. All responsible sources may submit an offer, which shall be considered by the Agency. The closing date annotated is an estimated date and may be adjusted dependent upon the date of release for solicitation; however, the solicitation will not close prior to the date stated above. Foreign Firms are reminded that all requests for solicitation must be processed through their respective embassies.

Inactive

THERE IS NO SOLICITATION AVAILABLE AT THIS TIME. REQUEST FOR A SOLICITATION WILL NOT RECEIVE A RESPONSE. This Sources Sought Synopsis (SSS) is in support of Market Research being conducted by the Defe... THERE IS NO SOLICITATION AVAILABLE AT THIS TIME. REQUEST FOR A SOLICITATION WILL NOT RECEIVE A RESPONSE. This Sources Sought Synopsis (SSS) is in support of Market Research being conducted by the Defense Logistics Agency to identify potential manufacturing/supply sources, and if future efforts can be competitive or Set Aside for Small Business. The proposed North American Industry Classification Systems (NAICS) Code is 336413 which has a corresponding Size Standard of 1,250 employees. This SSS is to notify companies that the Defense Logistics Agency, Redstone Arsenal, Alabama, is seeking qualified sources for SPRAG CLUTCH ASSEMBLY, NSN: 1615-01-305-6943 with corresponding Part Number: 107DS214-8 or CL-40093-7-22 in support of the CH-47 BK Chinook weapon system. Item is a flight critical safety item. First Article Testing is Required. Non-Approved Sources require Source Approval. Currently the only two approved sources of supply for this item are: The Boeing Company CAGE CODE 77272 Formsprag LLC CAGE CODE 91422 This item is suitable for competitive acquisition for the second or subsequent time from the indicated approved source(s) of supply. The rights to use the data needed to purchase this part from additional source(s) are not owned by the Government and cannot be purchased, developed, or otherwise obtained. The Government has access to the data but does not own the rights to the data. The rights ownership has been verified through the Project Management Office. There is no cause to contest the ownership of the rights. Reverse engineering is not feasible. As a result, this acquisition is currently being procured under Federal Acquisition Regulation (FAR) 6.302-1(a)(2) having only one or a limited number of responsible sources. The Government is interested in all businesses to include 8(a), small business and small disadvantaged business, Service-Disabled Veteran-Owned, Hub-Zone, and Women-Owned small business concerns. All contractors must meet prequalification requirements in order to be registered as a potential source. Firms that possess the ability and can produce the required item(s) described above are encouraged to identify themselves. Contractors are encouraged to seek source approval in order to compete for future solicitations by emailing inquiries to: usarmy.redstone.ccdc-avmc.mbx.ame-sar@army.mil. The contractor shall be capable of successfully performing and complying with any and all special requirements in accordance with the terms and conditions set forth in the solicitation annotated above, at the unit prices established at time of a contract award. The contractor will be responsible for recurring and nonrecurring engineering services associated with becoming a qualified source. The contractor will also be responsible for all aspects of the manufacturing/production process, including but not limited to supply chain management, logistics, forecasting of parts, long-lead parts procurement, material forecasting, obsolescence issues and final delivery of assets as well as any and all additional costs incurred resulting from contract performance. DISCLAIMER: THIS SSS IS ISSUED SOLELY FOR INFORMATIONAL AND PLANNING PURPOSES. IT DOES NOT CONSTITUTE A SOLICITATION (REQUEST FOR PROPOSAL OR REQUEST FOR QUOTATION) OR A PROMISE TO ISSUE A SOLICITATION IN THE FUTURE AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY.