Self-Locking Hex Nuts
****25 July 2024 Note: This amendment corrects the material description as follows below. All other soliciation terms remain the same. When quoting, please submit SPMYM324Q1116 0002 RFQ. New Material ... ****25 July 2024 Note: This amendment corrects the material description as follows below. All other soliciation terms remain the same. When quoting, please submit SPMYM324Q1116 0002 RFQ. New Material Description: Self-Locking Hex Nuts, 1-1/2" -12UNJF-3B, IAW NASM25072 For 800 Degree Hex Nuts, Nut to meet requirements of NASM21046, fasteners needed exceeds that listed in NASM21046 and shall meet the following dimensions: "A MAX=l.759, "B MIN"=2.176 B MAX"=2.190, "C MIN="2.484, "D MAX=l .565, "F MIN=.970, "K MIN"=2. l 76. Material to be SAE AMS-QQ-S-763D CLASS-304. End of Amendment 0002 **** ****19 July 2024 Note: The initial Solicitation document erroneously lists the total required as one (1). This amendment posts an updated Solicitation document showing the correct required total of sixteen (16). Please use the updated RFQ form SPMYM324Q1116 RFQ 0001 when submitting. All other terms of the Solicitation remain unchanged. ***** This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in FAR part 12, using Simplified Acquisition Procedures found at FAR 13 as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted to SAM.gov. The RFQ number is SPMYM324Q1116. This solicitation documents and incorporates provisions and clauses in effect through FAC 2024-05 and DFARS Change Notice 20240627. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at this address: https://www.ecfr.gov and https://www.acquisition.gov/content/list-sections-affected and http://www.acq.osd.mil/dpap/dars/change_notices.html. The FSC Code is 5310 and the NAICS code is 332722. This requirement is being processed utilizing Full and Open Competition. Evaluation criteria is Lowest Price Technically Acceptable (LPTA). PPIRS will be used to determine vendor responsibility. Potential contractors will be screened for responsibility in accordance with FAR 9.104. Offerors are required to submit descriptive literature to show how their quotation meets the required specifications. Failure to provide this information may result in your quotation being determined technically unacceptable. The Portsmouth Naval Shipyard requests responses from qualified sources capable of providing: CLIN 0001: Self-Locking Hex Nuts, 1-1/2" -12UNJF-3B, IA W NASM25072 For 250 Degree Hex Nuts, Nut to meet requirements ofNASM21046, fasteners needed ecceeds that listed in NASM21046 and shall meet the following dimensions: "A MAX=l.759, "B MIN"=2.176 B MAX"=2.190, "C MIN="2.484, "D MAX=l .565, "F MIN=.970, "K MIN"=2. l 76. Material to be SAE AMS-QQ-S-763D CLASS-304. CLIN 0002: Data Requirements A001 EXHIBIT A, SEQ A001 SEE EXHIBIT “A” SEQ A001: CDRL DI-MISC-81356A (CERTIFICATE OF COMPLIANCE). CLIN 0003: Data Requirements A002 EXHIBIT A, SEQ A001 SEE EXHIBIT “A” SEQ A001: CDRL DI-MISC-80678 (CERTIFICATION/DATA REPORT) NOTE: OFFERORS MUST COMPLETE THE ATTACHED PROVISIONS 52.204-24, 52.204-26, 252.204-7016, AND 252.204-7019 AND INCLUDE THE COMPLETED PROVISIONS WITH THEIR OFFER. A small business joint venture offeror must submit, with its offer, the representation required in paragraph (c) of FAR solicitation provision 52.212-3, Offeror Representations and Certifications-Commercial Products and Commercial Services, and paragraph (c) of FAR solicitation provision 52.219-1, Small Business Program Representations, in accordance with 52.204-8(d) and 52.212-3(b) for the following categories: (A) Small business; (B) Service-disabled veteran-owned small business; (C) Women-owned small business (WOSB) under the WOSB Program; (D) Economically disadvantaged women-owned small business under the WOSB Program; or (E) Historically underutilized business zone small business. FAR CLAUSES AND PROVISIONS 52.204-7, System for Award Maintenance 52.204-9, Personal Identity Verification of Contractor Personnel 52.204-13, SAM Maintenance 52.204-19, Incorporation by Reference of Representations and Certifications 52.204-24* See Attachment for this provision 52.204-26* See Attachment for this provision 52.204-29 FASCSA Representation* See Attachment for this provision 52.211-14, Notice of Priority Rating 52.211-15, Defense Priority And Allocation Requirements 52.211-17, Delivery of Excess Quantities 52.212-1, Instructions to Offerors - Commercial Items; 52.212-3, Offeror Reps and Certs 52.212-4, Contract Terms and Conditions – Commercial Items 52.223-3, Hazardous Material Identification and Material Safety Data (IF HAZ MATERIAL) 52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relation to Iran-Reps and Certs 52.232-39, Unenforceability of Unauthorized Obligations 52.233-2 Service of Protest 52.242-13 Bankruptcy 52.242-15 Stop Work Order 52.243-1, Changes Fixed Price 52.246-1, Contractor Inspection Requirements 52.247-34, F.O.B-Destination 52.252-1 Solicitation Provisions Incorporated by Reference 52.252-2 Clauses Incorporated by Reference 52.253-1, Computer Generated Forms 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items including all base terms, conditions, and clauses outlined within the clause, plus the following clauses that have been specifically selected (checked off within the clause) for this procurement: 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations 52.232-40 Providing Accelerated Payments to Small Business Subcontractors 52.233-3, Protest After Award 52.233-4, Applicable Law for Breach of Contract Claim 52.204-27 Prohibition on a ByteDance Covered Application 52.204-30 FASCSA Federal Acquisition Supply Chain Security Act Orders-Prohibition 52.219-4 Notice of Price Evaluation Preference for HUBZone 52.222-50 Combating Trafficking in Persons 52.223-11 Ozone Depleting Substances 52.223-18 Encouraging Contractors to Ban Text Messaging While Driving 52.225-13 Restriction on Certain Foreign Purchases 52.232-33 Payment by EFT-SAM 52.232-36 Payment by Third Party DFARS CLAUSES AND PROVISIONS 252.203-7000 Requirements Relating to Compensation of Former DoD Officials, 252.203-7002, Requirement to Inform Employees of Whistleblower Rights 252.203-7005 Representation Relating to Compensation of Former DoD Officials 252.204-7003. Control of Government Personnel Work Product 252.204-7004 Antiterrorism Awareness Training for Contractors. 252.204-7008 Compliance With Safeguarding Covered Defense Information Controls 252.204-7015, Disclosure of Information to Litigation Support Contractors 252.204-7016, * See Attachment for this provision. 252-204-7017, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services-Representation 252.204-7018, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services. 252.204-7024 Notice on the Use of the Supplier Performance Risk System 252.209-7999, Representation by Corporations regarding an Unpaid Delinquent Tax Liability 252.213-7000 Notice to Prospective Suppliers on Use of Supplier Performance Risk System in Past Performance Evaluations. 252.223-7006, Prohibition on Storage, Treatment, and Disposal of Toxic or Hazardous Materials. 252.223-7008 Prohibition of Hexavalent Chromium 252.225-7048, Export Controlled Items 252.225-7059 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region - Representation 252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region 252.231-7000, Supplemental Cost Principles. 252.232-7010, Levies on Contract Payments 252.243-7001, Pricing of Contract Modifications 252.243-7002, Requests for Equitable Adjustment 252.244-7000, Subcontracts for Commercial Items 252.247-7023, Transportation of Supplies By Sea Note: Vendor shall list the country of origin for each line item. DLAD CLAUSES AND PROVISIONS (See Attachment for Full Text) 52.233-9001, Disputes: Agreement to Use Alternative Disputes Resolution DLA PROCUREMENT NOTES (See Attachment for Full Text) C02 Manufacturing Phase-Out or Discontinuation of Production, Diminishing Sources, and Obsolete Materials or Components (DEC 2016) C03 Contractor Retention of Supply Chain Traceability Documentation (MAR 2023) C04 Unused Former Government Surplus Property (DEC 2016) C14 Repackaging or Relabeling to Correct Deficiencies (AUG 2017) C20 Vendor Shipment Module (VSM) (AUG 2017) E05 Product Verification Testing (JUN 2018) G01 Additional Wide Area Workflow (WAWF) Information (AUG 2017) H10 Awardee Requires No Access to DLA Controlled Technical Data or Information for Contract Performance (FEB 2020) L06 Agency Protests (DEC 2016) L31 Additive Manufacturing (JUN 2018) M05 Evaluation Factor for Unused Former Government Surplus Property (SEP 2016) LOCAL CLAUSES (See Attachment for Full Text): YM3 A1: Additional Information YM3 C500: Mercury Control (Supplies) YM3 C501: Correction of Certifications YM3 C524: Controlled Industrial Material YM3 C528: Specification Changes YM3 D2.2: Marking of Shipments YM3 D4: Preparation for Delivery YM3 D8: Prohibited Packing Materials YM3 E2: Inspection and Acceptance (Destination) YM3 E504: Notice of Constructive Acceptance Period YM3 F500: Consignment Instructions for Deliveries to the Portsmouth Naval Shipyard YM3 H500: Special Provisions for Threaded Products YM3 M8: Single Award for All Items Quoters are reminded to include a completed copy of 52.212-3 and it’s ALT I if not updated in SAM. This announcement will close 25 July 2024 at 3pm EST. The Point of Contact for this solicitation is Stephen Smith who can be reached at Stephen.1.Smith@dla.mil. All responsible sources may submit a quote which shall be considered by the agency. System for Award Management (SAM). Quoters must be registered in the SAM database to be considered for award. Registration is free and can be completed online at http://www.sam.gov/. If not the actual manufacturer – Manufacturer’s Name, Location, and Business Size must be provided. Please submit quotations via email at Stephen.1.Smith@dla.mil Quotes also to: DLA-KME-QUOTATIONS@DLA.MIL All quotes shall include price(s), FOB point, Cage Code, a point of contact, name and phone number, GSA contract number if applicable, business size under the NAICS Code, whether or not your company prefers payment by Government Commercial Purchase Card (GCPC) or Wide Area Workflow (WAWF). Please note that the Government’s terms for payment for this requirement are Net 30 Days AFTER acceptance of material. Each response must clearly indicate the capability of the quoter to meet all specifications and requirements. ******* END OF COMBINED SYNOPSIS/SOLICITATION ********
Data sourced from SAM.gov.
View Official Posting »