Inactive

SYNOPSIS: The Defense Logistics Agency (DLA) Maritime Norfolk at Norfolk Naval Shipyard (NNSY) intends to award a Firm Fixed Price (FFP) Single Award Contract for the items listed below. The required ... SYNOPSIS: The Defense Logistics Agency (DLA) Maritime Norfolk at Norfolk Naval Shipyard (NNSY) intends to award a Firm Fixed Price (FFP) Single Award Contract for the items listed below. The required items are for commercial items prepared in accordance with the information in FAR Part 13 and FAR Subpart 12.6, as supplemented with the additional information included in this notice. The Contract Line Items (CLINs) are as follows: CLIN 0001 QTY 1 LO VENDOR TO PROVIDE NITROGEN PER A-A-59155, TYPE 1 OR II, CLASS 1, GRADE A 1 LO=100,000 CUFT / UP TO 8 DEPLOYMENTS OF 1 LO. GASEOUS NITROGEN REQD TO SUPPORT NITROGEN AIR BANK CHARGING. STATEMENT OF WORK Scope: Title: Charging of Nitrogen Banks Supply gaseous Nitrogen to fill Nitrogen banks Location of work: Delivery shall be made to NNSY inside the Controlled Industrial Area Reference: Mil-Spec: A-A-59155 Nitrogen, High Purity, Special Purpose OSHA Safety requirements 29 CFR 1915.153, 1915.155 & 1915.156, eye, face and foot protection in shipyard environments. NNSY OSHE program Manual, NAVSHIPYDNORINST P5090.2 General Specifications: Vendor to provide Nitrogen per A-A-59155, Type 1 or II, Class 1, Grade B, for a total of up to 1 LO (LOT) = 100,000 cu ft at atmospheric pressure. Period of Performance Start – OCTOBER 21, 2024 thru NOVEMBER 22, 2024. Approximate duration is 1 day but may require a return trip if leaks are detected and require repair. Contractor Requirements: Gaseous Nitrogen (up to 100,000 cu ft. Total at Atmospheric pressure) is required to support Nitrogen Air Bank testing. Bulk Nitrogen may be provided in liquid form as long as Gaseous Nitrogen can be provided from pumping truck. Up to 2 deployments Vendor required to support Nitrogen tank “Top Off” after Nitrogen Air Bank Testing. Support to be provided at time of notification by NNSY/SSN-769 Project. NNSY to provide 6 working day notice to support fill of tanks. Vendor to provide Nitrogen per Reference 2.1, for a total of up to 1 Lot equal to 100,000 cu ft at Atmospheric pressure. Vendor to provide OQE to Ship’s Force that Nitrogen supplied conforms to Table (A) of A-A-59155. Pumping truck must provide Gaseous Nitrogen at a delivery PSIG of at least 5100 PSIG with operator. Delivery capacity shall be a minimum of 50 cu ft./min. However, higher delivery rate is desired. Pumping truck must have an Oxygen grade clean connection to mate with ½ inch male or female CPV union. Gaseous Nitrogen must be filtered to meet the permanent particulate count of Nitrogen specified in para 3.1 of spec A-A-59155, the requirement is no particulates whose dimensions are greater than 50 microns using a 10 micron or better filter. Safety/Security Requirements: Delivery shall be made inside the Controlled Industrial Area (Pier 3). Contractor shall apply for security access through DBIDS with pass office security office. Contractor shall be responsible for adhering to OSHA Safety requirements while inside the PPE line of the project as outlined in 29 CFR 1915.153, 1915.155 & 1915.156, eye, face and foot protection in shipyard environments "Per FAR 22.102-1(a) entitled "Safety", Contractors are hereby informed that their employees or representatives present on property under Norfolk Naval Shipyard cognizance must follow Federal and State OSHA requirements OSHE OSHECM Chapter Hazardous Energy Control (HEC) requirements or safety requirements for site specific location of the contract. a. Contractors and Non-NNSY Government Agencies (NNGAs) are hereby informed that their employees or representatives present on property under Norfolk Naval Shipyard (NNSY) cognizance must adhere to Federal OSHA requirements for hazardous energy control IAW 29 CFR 1915.89 and must follow Hazardous Energy Control (HEC) procedures as identified in NAVSEA’s Occupational Safety, Health, and Environment Corporate Manual (OSHECM) Chapter 250 (latest revision), when performing work under NNSY contract. All HEC work to be performed by Contractors and NNGAs requires that NNSY Technical Points of Contact (TPOCs) and/or Contracting Officer’s Representatives (CORs) be notified of the HEC scope of work prior to starting work. Any changes or deviations in the initial scope of HEC work requires the NNSY TPOCs and/or CORs be informed of the change/deviation. Appendix 250.B-1 through B-3 of OSHECM Chapter 250 for multiple employer work identifies when Contractors and NNGAs are required to assign their Lockout/Tags-Plus Coordinator (LOTC) to coordinate HEC work with the cognizant NNSY LOTC. HEC locks shall be provided by the contractor or NNGA for their employees use. The HEC locks shall have red bodies with name labels or name tags affixed, identifying who installed the HEC lock(s) and a point of contact telephone number. HEC lock name labels and tags must be made of materials that will hold up to the environment to which they are exposed. HEC tags used for Tags-Plus HEC work shall be provided by the cognizant NNSY LOTC to the contractor or NNGA for their use if machinery, equipment, or systems (MES) cannot be locked out. OSHECM Chapter 250 Tags-Plus procedures will be strictly followed. b. Contractors and NNGAs may obtain electronic copies of OSHECM Chapter 250 (latest revision) and access the OSHA 1915.89 web site by using the following link to NNSY’s public access web site: http://www.navsea.navy.mil/shipyards/norfolk/default.aspx c. Names and contact information for NNSY LOTCs and/or the Building Monitor will be provided by NNSY TPOC and/or CORs set forth elsewhere in this award document. Government Responsibility: If required, NNSY can Oxygen grade clean pumper connection supplied by the contractor. DBIDS 1.1 Identification Badges and Installation Access. • Any new contractor, vendor or supplier requesting base access AFTER 31 May 2017 will be required to obtain a DBIDS credential. NCACS credentials will no longer be issued. • Only DBIDS credentials will be issued to ALL contractors, vendors and suppliers seeking base access AFTER 14 August 2017. Defense Biometric Identification System (DBIDS) increases installation security and communications by receiving frequent database updates on changes to personnel/credential status, law enforcement warrants, lost/stolen cards, and force protection conditions. The system provides a continuous vetting anytime the DBIDS card is scanned at an installation entry point. If you currently have a Navy Commercial Access Control System (NCACS) card, the following is required to get a DBIDS credential: • Present your NCACS Card and a completed copy of the SECNAV FORM 5512/1 to the base Visitor Control Center representative. • The VCC will pull up your information in the computer, ensuring all information is current and correct. • Once your information is validated, a temporary DBIDS credential is provided. • Your temporary credential will have an expiration date, prior to which you will need to obtain your permanent DBIDS credential (~ 90 days). • For each additional U.S. Navy installation to which you need access, the first time you visit you only need to bring your DBIDS credential and statement of purpose for base access when arriving at the Visitor Control Center. • The representative will enter base access authorization and then you may proceed to work. If you do NOT have an NCACS Card, the following is required to obtain a DBIDS credential: • Present a letter or official document from my government sponsoring organization that provides the purpose for your access. • Present valid identification, such as a passport or Real ID Act-compliant state driver's license. • Present a completed copy of the SECNAV 5512/1 form to obtain your background check. • Upon completion of the background check, the Visitor Control Center representative will complete the DBIDS enrollment process, which includes your photo, finger prints, base restrictions, and several other assessments; after all this is done, you will be provided with your new DBIDS credential. • You may now proceed to work. FOR ADDITIONAL QUESTIONS ABOUT OBTAINING A DBIDS CARD, CONTACT YOUR LOCAL BASE VISITOR CONTROL CENTER. INFORMATION IS ALSO PROVIDED AT: www.cnic.navy.mil/om/dbids.html 1.2. One-Day Passes. Participation in the DBIDS is not mandatory, and if the Contractor chooses to not participate, the Contractor's personnel will have to obtain daily passes, be subject to daily mandatory vehicle inspection, and will have limited access to the installation. The Government will not be responsible for any cost or lost time associated with obtaining daily passes or added vehicle inspections incurred by non-participants in the DBIDS. ECMRA ENTERPRISE-WIDE CONTRACTOR MANPOWER REPORTING APPLICATION (ECMRA) - The contractor shall report contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract via a secure data collection site. Contracted services excluded from reporting are based on Product Service Codes (PSCs). The excluded PSCs are: (1) W, Lease/Rental of Equipment; (2) X, Lease/Rental of Facilities; (3) Y, Construction of Structures and Facilities; (4) S, Utilities ONLY; (5) V, Freight and Shipping ONLY. The contractor is required to completely fill in all required data fields using the following web address https://doncmra.nmci.navy.mil. Reporting inputs will be for the labor executed during the period of performance during each Government fiscal year (FY), which runs October 1 through September 30. While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year. Contractors may direct questions to the help desk, linked at https://doncmra.nmci.navy.mil. PORTABLE ELECTRONIC DEVICES (PEDs) In accordance with COMSUBLANT/COMSUBPACINST 2075.1C, the use of Portable Electronic Devices (PEDs) while in or on Department of Navy Submarine spaces are prohibited. A portable electronic device (PED) is defined as any non-stationary electronic apparatus with singular or multiple capabilities of, but not limited to recording, storing, and/or transmitting data, voice, video, or photo images (e.g., cell phones, laptops, tablets and wearable devices such as fitness bands and smart watches). The requirement will be solicited as full and open competition. The NAICS code applicable to this procurement is 325120: Industrial Gas Manufacturing. The Product Service Code is W099, Lease or Rental of Equipment-Miscellaneous. The anticipated delivery date for this acquisition is 15 days after contract award. The solicitation, any documents related to this procurement, and all amendments issued will be in electronic form only. THE SOLICITATION IS NOT YET AVAILABLE. The solicitation number is SPMYM125Q0006, and it is expected to be available on or about 30 OCT 2024 and posted to SAM.gov, https://sam.gov/. Quotes will be due by 12:00 PM EST on 4 NOV 2024. Responses to the solicitation notice shall be emailed to the attention of LaKeisha Violenusellis at lakeisha.violenusellis@dla.mil. Please make sure that the solicitation number (SPMYM125Q0006) is included in the subject line of any email correspondence. Emails without subject lines will not be read because of security issues. Potential offerors are hereby notified that the solicitation and any subsequent amendments will only be available by downloading the documents at www.SAM.gov (Contracting Opportunities). The Government is not responsible for inability of the Offeror's to access solicitation documents posted. No telephone or FAX requests will be accepted, and no hardcopy solicitation/amendment will be mailed or faxed. All responsible sources may submit a proposal which may be considered by the Government. By submitting an offer, the offeror will be self-certifying that neither the principal corporate officials nor owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any federal agency. Failure to do so may represent grounds for refusing to accept the proposal. By submission of a proposal, the offeror acknowledges the requirement that a prospective awardee must be registered in the System for Award Management (SAM) database prior to award, during performance, and through final payment of any contract resulting from the solicitation, except for awards to foreign vendors for work to be performed outside the United States. Lack of registration in the SAM database will make an offeror ineligible for award. Offerors may obtain information on registration and annual confirmation requirements by calling 1-866-606-8220, or via the Internet at https://www.sam.gov. All questions shall be submitted in accordance with the solicitation, dates, and procedures. Please direct all questions regarding this requirement to LaKeisha Violenusellis at lakeisha.violenusellis@dla.mil.

Inactive

SYNOPSIS: The Defense Logistics Agency (DLA) Maritime Norfolk at Norfolk Naval Shipyard (NNSY) intends to award a Firm Fixed Price (FFP) Single Award Contract for the items listed below. The required ... SYNOPSIS: The Defense Logistics Agency (DLA) Maritime Norfolk at Norfolk Naval Shipyard (NNSY) intends to award a Firm Fixed Price (FFP) Single Award Contract for the items listed below. The required items are for commercial items prepared in accordance with the information in FAR Part 13 and FAR Subpart 12.6, as supplemented with the additional information included in this notice. The Contract Line Items (CLINs) are as follows: CLIN 0001 QTY 1 LO VENDOR TO PROVIDE NITROGEN PER A-A-59155, TYPE 1 OR II, CLASS 1, GRADE A 1 LO=100,000 CUFT / UP TO 8 DEPLOYMENTS OF 1 LO. GASEOUS NITROGEN REQD TO SUPPORT NITROGEN AIR BANK CHARGING. STATEMENT OF WORK Scope: Title: Charging of Nitrogen Banks Supply gaseous Nitrogen to fill Nitrogen banks Location of work: Delivery shall be made to NNSY inside the Controlled Industrial Area Reference: Mil-Spec: A-A-59155 Nitrogen, High Purity, Special Purpose OSHA Safety requirements 29 CFR 1915.153, 1915.155 & 1915.156, eye, face and foot protection in shipyard environments. NNSY OSHE program Manual, NAVSHIPYDNORINST P5090.2 General Specifications: Vendor to provide Nitrogen per A-A-59155, Type 1 or II, Class 1, Grade B, for a total of up to 1 LO (LOT) = 100,000 cu ft at atmospheric pressure. Period of Performance Start – OCTOBER 21, 2024 thru NOVEMBER 22, 2024. Approximate duration is 1 day but may require a return trip if leaks are detected and require repair. Contractor Requirements: Gaseous Nitrogen (up to 100,000 cu ft. Total at Atmospheric pressure) is required to support Nitrogen Air Bank testing. Bulk Nitrogen may be provided in liquid form as long as Gaseous Nitrogen can be provided from pumping truck. Up to 2 deployments Vendor required to support Nitrogen tank “Top Off” after Nitrogen Air Bank Testing. Support to be provided at time of notification by NNSY/SSN-769 Project. NNSY to provide 6 working day notice to support fill of tanks. Vendor to provide Nitrogen per Reference 2.1, for a total of up to 1 Lot equal to 100,000 cu ft at Atmospheric pressure. Vendor to provide OQE to Ship’s Force that Nitrogen supplied conforms to Table (A) of A-A-59155. Pumping truck must provide Gaseous Nitrogen at a delivery PSIG of at least 5100 PSIG with operator. Delivery capacity shall be a minimum of 50 cu ft./min. However, higher delivery rate is desired. Pumping truck must have an Oxygen grade clean connection to mate with ½ inch male or female CPV union. Gaseous Nitrogen must be filtered to meet the permanent particulate count of Nitrogen specified in para 3.1 of spec A-A-59155, the requirement is no particulates whose dimensions are greater than 50 microns using a 10 micron or better filter. Safety/Security Requirements: Delivery shall be made inside the Controlled Industrial Area (Pier 3). Contractor shall apply for security access through DBIDS with pass office security office. Contractor shall be responsible for adhering to OSHA Safety requirements while inside the PPE line of the project as outlined in 29 CFR 1915.153, 1915.155 & 1915.156, eye, face and foot protection in shipyard environments "Per FAR 22.102-1(a) entitled "Safety", Contractors are hereby informed that their employees or representatives present on property under Norfolk Naval Shipyard cognizance must follow Federal and State OSHA requirements OSHE OSHECM Chapter Hazardous Energy Control (HEC) requirements or safety requirements for site specific location of the contract. a. Contractors and Non-NNSY Government Agencies (NNGAs) are hereby informed that their employees or representatives present on property under Norfolk Naval Shipyard (NNSY) cognizance must adhere to Federal OSHA requirements for hazardous energy control IAW 29 CFR 1915.89 and must follow Hazardous Energy Control (HEC) procedures as identified in NAVSEA’s Occupational Safety, Health, and Environment Corporate Manual (OSHECM) Chapter 250 (latest revision), when performing work under NNSY contract. All HEC work to be performed by Contractors and NNGAs requires that NNSY Technical Points of Contact (TPOCs) and/or Contracting Officer’s Representatives (CORs) be notified of the HEC scope of work prior to starting work. Any changes or deviations in the initial scope of HEC work requires the NNSY TPOCs and/or CORs be informed of the change/deviation. Appendix 250.B-1 through B-3 of OSHECM Chapter 250 for multiple employer work identifies when Contractors and NNGAs are required to assign their Lockout/Tags-Plus Coordinator (LOTC) to coordinate HEC work with the cognizant NNSY LOTC. HEC locks shall be provided by the contractor or NNGA for their employees use. The HEC locks shall have red bodies with name labels or name tags affixed, identifying who installed the HEC lock(s) and a point of contact telephone number. HEC lock name labels and tags must be made of materials that will hold up to the environment to which they are exposed. HEC tags used for Tags-Plus HEC work shall be provided by the cognizant NNSY LOTC to the contractor or NNGA for their use if machinery, equipment, or systems (MES) cannot be locked out. OSHECM Chapter 250 Tags-Plus procedures will be strictly followed. b. Contractors and NNGAs may obtain electronic copies of OSHECM Chapter 250 (latest revision) and access the OSHA 1915.89 web site by using the following link to NNSY’s public access web site: http://www.navsea.navy.mil/shipyards/norfolk/default.aspx c. Names and contact information for NNSY LOTCs and/or the Building Monitor will be provided by NNSY TPOC and/or CORs set forth elsewhere in this award document. Government Responsibility: If required, NNSY can Oxygen grade clean pumper connection supplied by the contractor. DBIDS 1.1 Identification Badges and Installation Access. • Any new contractor, vendor or supplier requesting base access AFTER 31 May 2017 will be required to obtain a DBIDS credential. NCACS credentials will no longer be issued. • Only DBIDS credentials will be issued to ALL contractors, vendors and suppliers seeking base access AFTER 14 August 2017. Defense Biometric Identification System (DBIDS) increases installation security and communications by receiving frequent database updates on changes to personnel/credential status, law enforcement warrants, lost/stolen cards, and force protection conditions. The system provides a continuous vetting anytime the DBIDS card is scanned at an installation entry point. If you currently have a Navy Commercial Access Control System (NCACS) card, the following is required to get a DBIDS credential: • Present your NCACS Card and a completed copy of the SECNAV FORM 5512/1 to the base Visitor Control Center representative. • The VCC will pull up your information in the computer, ensuring all information is current and correct. • Once your information is validated, a temporary DBIDS credential is provided. • Your temporary credential will have an expiration date, prior to which you will need to obtain your permanent DBIDS credential (~ 90 days). • For each additional U.S. Navy installation to which you need access, the first time you visit you only need to bring your DBIDS credential and statement of purpose for base access when arriving at the Visitor Control Center. • The representative will enter base access authorization and then you may proceed to work. If you do NOT have an NCACS Card, the following is required to obtain a DBIDS credential: • Present a letter or official document from my government sponsoring organization that provides the purpose for your access. • Present valid identification, such as a passport or Real ID Act-compliant state driver's license. • Present a completed copy of the SECNAV 5512/1 form to obtain your background check. • Upon completion of the background check, the Visitor Control Center representative will complete the DBIDS enrollment process, which includes your photo, finger prints, base restrictions, and several other assessments; after all this is done, you will be provided with your new DBIDS credential. • You may now proceed to work. FOR ADDITIONAL QUESTIONS ABOUT OBTAINING A DBIDS CARD, CONTACT YOUR LOCAL BASE VISITOR CONTROL CENTER. INFORMATION IS ALSO PROVIDED AT: www.cnic.navy.mil/om/dbids.html 1.2. One-Day Passes. Participation in the DBIDS is not mandatory, and if the Contractor chooses to not participate, the Contractor's personnel will have to obtain daily passes, be subject to daily mandatory vehicle inspection, and will have limited access to the installation. The Government will not be responsible for any cost or lost time associated with obtaining daily passes or added vehicle inspections incurred by non-participants in the DBIDS. ECMRA ENTERPRISE-WIDE CONTRACTOR MANPOWER REPORTING APPLICATION (ECMRA) - The contractor shall report contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract via a secure data collection site. Contracted services excluded from reporting are based on Product Service Codes (PSCs). The excluded PSCs are: (1) W, Lease/Rental of Equipment; (2) X, Lease/Rental of Facilities; (3) Y, Construction of Structures and Facilities; (4) S, Utilities ONLY; (5) V, Freight and Shipping ONLY. The contractor is required to completely fill in all required data fields using the following web address https://doncmra.nmci.navy.mil. Reporting inputs will be for the labor executed during the period of performance during each Government fiscal year (FY), which runs October 1 through September 30. While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year. Contractors may direct questions to the help desk, linked at https://doncmra.nmci.navy.mil. PORTABLE ELECTRONIC DEVICES (PEDs) In accordance with COMSUBLANT/COMSUBPACINST 2075.1C, the use of Portable Electronic Devices (PEDs) while in or on Department of Navy Submarine spaces are prohibited. A portable electronic device (PED) is defined as any non-stationary electronic apparatus with singular or multiple capabilities of, but not limited to recording, storing, and/or transmitting data, voice, video, or photo images (e.g., cell phones, laptops, tablets and wearable devices such as fitness bands and smart watches). The requirement will be solicited as full and open competition. The NAICS code applicable to this procurement is 325120: Industrial Gas Manufacturing. The Product Service Code is W099, Lease or Rental of Equipment-Miscellaneous. The anticipated delivery date for this acquisition is 15 days after contract award. The solicitation, any documents related to this procurement, and all amendments issued will be in electronic form only. The solicitation number is SPMYM125Q0006, and it is expected to be available on or about 30 OCT 2024 and posted to SAM.gov, https://sam.gov/. Quotes will be due by 12:00 PM EST on 4 NOV 2024. Responses to the solicitation notice shall be emailed to the attention of LaKeisha Violenusellis at lakeisha.violenusellis@dla.mil. Please make sure that the solicitation number (SPMYM125Q0006) is included in the subject line of any email correspondence. Emails without subject lines will not be read because of security issues. Potential offerors are hereby notified that the solicitation and any subsequent amendments will only be available by downloading the documents at www.SAM.gov (Contracting Opportunities). The Government is not responsible for inability of the Offeror's to access solicitation documents posted. No telephone or FAX requests will be accepted, and no hardcopy solicitation/amendment will be mailed or faxed. All responsible sources may submit a proposal which may be considered by the Government. By submitting an offer, the offeror will be self-certifying that neither the principal corporate officials nor owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any federal agency. Failure to do so may represent grounds for refusing to accept the proposal. By submission of a proposal, the offeror acknowledges the requirement that a prospective awardee must be registered in the System for Award Management (SAM) database prior to award, during performance, and through final payment of any contract resulting from the solicitation, except for awards to foreign vendors for work to be performed outside the United States. Lack of registration in the SAM database will make an offeror ineligible for award. Offerors may obtain information on registration and annual confirmation requirements by calling 1-866-606-8220, or via the Internet at https://www.sam.gov. All questions shall be submitted in accordance with the solicitation, dates, and procedures. Please direct all questions regarding this requirement to LaKeisha Violenusellis at lakeisha.violenusellis@dla.mil.