Inactive
Total Small Business Set-Aside (FAR 19.5)
Notice ID:SPMYM122Q0031
The Defense Logistics Agency (DLA), Land and Maritime located at the Norfolk Naval Shipyard, Portsmouth, Virginia, Contracting Division intends to negotiate a firm fixed price contract, for the items ...
The Defense Logistics Agency (DLA), Land and Maritime located at the Norfolk Naval Shipyard, Portsmouth, Virginia, Contracting Division intends to negotiate a firm fixed price contract, for the items listed below utilizing the North American Industry Classification System Code 332919 Other Metal Valve and Pipe Fitting Manufacturing. This is a brand name or equal solicitation with the only acceptable items manufactured by HABCO INDUSTRIES LLC as listed in the individual descriptions. This requirement will be set aside as a 100% Small Business concern. The Contract Line Items (CLINs) are as follows. 0001 1 Each N4215813360151 FFP HABCO SERVO TEST MANIFOLD SERVO TEST MANIFOLD DUCTILE IRON (19"X12"X11") W/ CLEAR ZINC TRIVALENT COATING NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent. FOB: Destination MILSTRIP: N4215813360151 PURCHASE REQUEST NUMBER: N4215813360151 PROJECT: YY9 PSC CD: 4730 0002 1 Each N4215813360153 FFP HABCO TRANSMITTER TRANSMITTER, FLOWMETER, TEMPERATURE COPENSATIN, LINEAR LINK, 15-32 VDC POWER RF CARRIER FOB: Destination MILSTRIP: N4215813360153 PURCHASE REQUEST NUMBER: N4215813360151 PROJECT: YY9 PSC CD: 6695 0003 1 Each N4215813360154 FFP HABCO POTENTIOMETER POTENTIOMETER, IP65, 10K OHM, BLACK FOB: Destination MILSTRIP: N4215813360154 PURCHASE REQUEST NUMBER: N4215813360151 PROJECT: YY9 PSC CD: 9999 0004 1 Each N4215813360157 FFP HABCO PRESSURE GAUGE PRESSUE GAUGE, FRONT FLANGE MOUNT, 4 1/2" DIAL, 1/4% FULL SCALE ACCURACY FOB: Destination MILSTRIP: N4215813360157 PURCHASE REQUEST NUMBER: N4215813360151 PROJECT: YY9 PSC CD: 6685 Technical Ordering Data For Parts to Repair HABCO Industries HTSS000C Hydraulic Test Stand 1. Specification: 1.1. Scope: Provide the following replacement parts to repair test stand. 1.1.1. (lea.) 128-1423-05 Servo Test Manifold Ductile Iron (19"x12"x11") W/ Clear Zinc Trivalent Coating, 1.1.2. (lea.) FT-24C2U2-LEAT5 METER, FLOW 1.1.3. (lea.) LAT-3-C0-MAB6 METER TRANSDUCER, FLOW 1.1.4. (lea.) EXX2300-10K POTENTIOMETER 1.1.5. (lea.) EXX2640 PLATE, LABEL 1.1.6. (lea.) 50205K31 SWITCH, FLOAT 1.1.7. (lea.) 101FTM16A01 PRESSURE GAUGE 2. Equipment Specifications: HABCO Industries HTS5000C Hydraulic Test Stand serial number 7866 2.1. Salient Characteristics of Replacement Parts: Replacement parts shall meet the following salient characteristics: 2.1.1. Servo Test Manifold (lea.): HABCO Proprietary item number 128-1423-05 2.1.1.1. Material: Ductile Iron with Clear Zinc Trivalent Coating 2.1.1.2. Dimensions: (19"x12"x11") 2.1.1.3. Operating Pressure: 6,000 PSI 2.1.1.4. LOGIC ELEMENT {9ea.): P/N DKJS-XHN W/BUNA-N SEALS, 2 WAY/2 POS 2.1.1.5. LOGIC ELEMENT {2ea.): P/N DKDSXHN W/BUNA-N SEALS 2.1.1.6. PILOT OPERATED 3 WAY CARTRIDGE VALVES {12ea.): P/N DBAP-FCN 2.1.1.7. DIRECT ACTING RELIEF VALVES {3ea.): P/N RDJA-LCN WITH AN ADJUSTABLE RANGE OF 1000-6000 PSIG (SET@ 5200 PSI) 2.1.1.8. DIRECT ACTING RELIEF VALVE {lea.): P/N RDJA-LBN WITH AN ADJUSTABLE RANGE OF 300-1500 PSI (SET AT 900 PSIG) 2.1.1.9. DIRECT ACTING RELIEF VALVE {lea.): P/N RDDALBN WITH AN ADJUSTABLE RANGE OF 300-1500 PSIG (SET AT 900 PSIG) 2.1.1.10. 3-WAY AIR PILOTED DIRECTIONAL CONTROL VALVE {3ea.): P/N DVBD 8FN W/INTEGRAL AIR PILOT CARTRIDGE P/N DAAP-FCN 2.1.1.11. MANIFOLD TO HAVE SAE FLANGE PORTS 2.1.1.12. MANIFOLD TO HAVE SAE STRAIGHT THREADED PORTS 2.1.1.13. MANIFOLD WILL INCLUDE LIFTING EYES ON EACH SIDE 2.1.2. FT-24C2U2-LEAT5 METER, FLOW {lea.): FLOW METER, TURBUNE TYPE, 1" 300# ANSI RF FLANGE ENDS, TWO VISCOSITY UNIVERSAL CALIBRATION, FOR USE WITH CHEVRON 2190TEP/MIL-PRF-17331 AT 90°F & 130°F, 10 POINTS CALIBRATION AT EACH VISCOSITY, FLOW RANGE OF 1.0 TO 60 GPM, 316 SST HOUSING, 440C BALL BEARINGS, RF PICKOFF, INTEGRAL RTD, FLYING LEADS. 2.1.3. LAT-3-C0-MAB6 METER TRANSDUCER, FLOW (lea.): TRANSMITTER, FLOWMETER, TEMPERATURE COMPENSATING, 'LINEAR LINK', 15-32 VDC POWER, RF CARRIER PICKOFF INPUT, INTEGRAL 100 OHM RTD INPUT, ANALOG CURRENT OUTPUT (4-20 Ma), ANALOG TEMPERATURE OUTPUT (4-20mA), PULSE FLOW OUTPUT (0-5 V), NEMA 4X ENCLOSURE WITH 1/2" NPT CONDUIT CONNECTIONS. 2.1.4. EXX2300-10K POTENTIOMETER (lea.): 22MM POTENTIOMETER WITH 10 KOHM RESISTANCE, BLACK HANDLE. LEGEND PLATE EXX2640 SOLD SEPARATELY. 2.1.5. EXX2640 PLATE, LABEL (lea.): 22MM LEGEND PLATE FOR POTENTIOMETER WITH 0% TO 100% MARKING, 1 PER PACK 2.1.6. 50205K31 SWITCH, FLOAT (lea.): LIQUID LEVEL SWITCH, POLYBUTYLENE FLOAT & STEM, 300 DEG F MAX. TEMP, 100 PSI MAX. PRESSURE, 0.85 MIN. S.G., 0.28 AMPS@ 120 VAC, 1/2" NPTM MOUNTING, 2-3/4" MTG. LENGTH, 24" WIRE LEADS 2.1.7. 101FTM16A01 PRESSURE GAUGE (lea.): PRESSURE GAUGE, FRONT FLANGE MOUNT, 4 1/2" DIAL, 1/4% FULL SCALE ACCURACY 1. Warranty: Supplies furnished shall be covered by warranty from defects in design, materials and workmanship for a period of one (1) year and shall conform to all requirements of the contract. 2. Location: Norfolk Naval Shipyard/Building 171/lst floor/Code 931/Section 204 Hydraulics 3. Technical POC: Russell Harris, Russell.r.harris@navy.mil 757-636-4908 Patrick A. Craig, Patrick.craig@navy.mil 757-532-3295 This procurement will be processed in accordance with Federal Acquisition Regulation (FAR) Subpart 13 Simplified Acquisition Procedures for Commercial Item. The solicitation number is SPMYM122Q0031 and it is expected to be posted on or about 10 December 2021 and posted in SAM, https://.sam.gov/. Quotes will be due by 6:00 am EST on 21 December 2021 and may be emailed to the attention of Craig Harmon at craig.harmon@dla.mil. Please make sure that the solicitation number (SPMYM122Q0031) is included in the subject line of any email correspondence. Emails without subject lines will not be read because of security issues. Vendors are hereby notified that the solicitation and any subsequent amendments to the solicitation will only be available by downloading the documents at https://.sam.gov/ By submitting a quote, the vendor will be self-certifying that neither it nor its principal corporate officials and owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any Federal agency.
