Inactive Total Small Business Set-Aside (FAR 19.5)

HOSE 2 ½" Seawater Hose, 50' Lengths NOTE CHANGE - SUPPLIER MUST PROVIDE WRITTEN CERTIFICATION THAT HOSE ASSEMBLIES (HOSE AND FITTING) HAVE BEEN HYDROSTATICALLY TESTED AT 600 PSIG WITH CLEAN, FRESH WA... HOSE 2 ½" Seawater Hose, 50' Lengths NOTE CHANGE - SUPPLIER MUST PROVIDE WRITTEN CERTIFICATION THAT HOSE ASSEMBLIES (HOSE AND FITTING) HAVE BEEN HYDROSTATICALLY TESTED AT 600 PSIG WITH CLEAN, FRESH WATER FOR 30 MINUTES WITH ZERO LEAKS AND/OR BULDGES. HOSE ASSEMBLY MUST BE MANUFACTURED USING COMPONENTS FROM ONE MANUFACTURER. HOSE ASSEMBLIES ARE TO BE ORDERED USING THE TECHNICAL SPECIFICATIONS OUTLINED BELOW. EACH HOSE ASSEMBLY IS TO BE IN LENGHTS OF 50 FEET AND EQUIPPED WITH IDENTICAL MALE NPT FTGS ON EACH END. ASSEMBLIES MUST BE PROVIDED USING AEROQUIP PART NUMBER 2651-40 OR AE 369 FOR THE HOSE AND PART NUMBER 44- 412-40-40 FOR THE FITTINGS OR EQUAL. NOTE: THE HOSE IS NOT LIMITED TO AEROQUIP. ANY OTHER COMPANY THAT COMPLIES WITH THE SALIENT CHARACTERISTICS LISTED BELOW MAY BE CONSIDERED. SALIENT CHARACTERISTICS FOR HOSE: 1.OUTSIDE DIAMETER 2.875 INCHES 2. INSIDE DIAMETER 2.375 INCHES 3. BURST TEST PRESSURE 1400 PS 4. HYDRO TEST PRESSURE 700 PSI 5. MAXIMUM OPERATING PRESSURE 350 PSI 6. MINIMUM INSIDE BENDING RADIUS 24 INCHES 7. INNER CONVEYING TUBE MATL RUBBER SYNTHETIC LAYER COMPOSITION 1st LAYER OF BRAIDED TEXTILE YARN LAYER COMPOSITION 2nd LAYER BRAIDED STEEL WIRE LAYER COMPOSITION 3rd LAYER BRAIDED TEXTILE YARN 8. OUTER LAYER MOLDED RUBBER, SYNTHETIC SALIENT CHARACTERISTICS FOR HOSE ADAPTER (TWO PER HOSE SECTION) 1. CONNECTION TYPE 1st END THROED EXTERNAL HOSE GRIPPING 2. CONNECTION TYPE 2nd END THROED EXTERNAL PIPE 3. MAX OPERATING PRESSURE 350 PSI 4. NOMINAL THRO SIZE 2.500 INCHES 5. NOMINAL PIPE SIZE ACCOMMODATED 2.500 INCHES 6. SEAT ANGLE 30 DEGREES 7. MATERIAL COPPER ALLOY 8. THRO SERIES DESIGNATOR NPTF, FURNISHED ITEM 1 COUPLING This is a combined synopsis/solicitation for commercial items prepared in accordance with the information in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted on SAM.GOV. The solicitation documents and incorporates provisions and clauses in effect through Federal Acquisition Circular 2022-04 and DFARS Change Notice 20211230. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: https://www.acquisition.gov/far and http:// www.acq.osd.mil/dpap/dars/dfarspgi/current/. The NAICS code is 326220 and the Small Business Size Standard is 750 employees. The proposed contract action is set-aside for small business concerns. The proposed contract action is for commercial items for which the Government intends to award a Single Award contract with Firm Fixed-price provisions, under the authority of FAR Subpart 13.5. Interested persons may identify their interest and capability to respond to the requirement or submit proposals. All bids, proposals, or quotations received by the closing response date may be considered by the Government. 1. Solicitation Number: SPMYM1-22-Q-0012 2. Solicitation Issue Date: 01 MARCH 2022 3. Contract Specialist: Angela Goldsmith 4. Quote Due Date/Local Time: 11 March 2022 5:00 PM EST. All quotes must be submitted electronically to Angela.Goldsmith@DLA.MIL by the quote due date above. The email subject field shall contain the solicitation number. The email body shall include the Contractor name, address, phone number, and email address. PAPER COP Y QUOTES WILL NOT BE ACCEPTED. 5. SITE VISIT: There will be no site visit for this requirement. 6. Questions: All questions shall be in writing and e-mailed to Angela.Goldsmith@DLA.MIL Questions concerning this solicitation will be accepted up to the Close of Business (1500 EST) on 8 March 2022. DLA Maritime does not commit to providing responses to questions submitted after this date; however, attempts to answer questions will be made. If needed a solicitation amendment will be posted by 10 March 2022.HOSE