Inactive Total Small Business Set-Aside (FAR 19.5)

AMENDMENT #4: Solicitation: SPE8EF24R0001, Amendment: 0004 Solicitation # SPE8EF24R0001 is hereby amended to extend the closing date for submission of proposals to Wednesday, March 26, 2025, at 4:30 P... AMENDMENT #4: Solicitation: SPE8EF24R0001, Amendment: 0004 Solicitation # SPE8EF24R0001 is hereby amended to extend the closing date for submission of proposals to Wednesday, March 26, 2025, at 4:30 PM EST. Offerors are reminded to submit complete signed copies of the Solicitation, ALL Amendments, including this Amendment, as well as ALL material required under the Solicitation and each Amendment by the closing date & time stated above. Please carefully review the Solicitation and All Amendments and make sure that your submission is a complete proposal. Please review all previous proposal submissions, including required certifications and amendments, to ensure that they are signed, accurate, and complete, and resubmit by the closing date and time as necessary. Failure to submit complete proposals, including the signed Solicitation and Amendments, by the closing date and time may result in the exclusion of your proposal for further consideration for award. As per Addendum to FAR 52.212-1 Paragraph (c) Period for acceptance of offers. The offeror agrees to hold the prices in its offer firm 120 calendar days after closing date. Complete proposals shall be submitted electronically via email ONLY to both recipients: teresa.rivera@dla.mil and maureen.tyler@dla.mil, no later than the Closing Date & Time stated above. See attached Amendment (SF30_SPE8EF24R00010004.PDF). AMENDMENT #3: Solicitation: SPE8EF24R0001, Amendment: 0003 The Closing date for Receipt of Proposals is extended to Monday, December 23, 2024. Submit no later than 04:30 PM EST. Proposals and Amendments shall be submitted electronically via email ONLY as explained in the solicitation on page 5. Solicitation # SPE8EF24R0001 is hereby amended to include applicable clauses on page 14 and 15, and to clarify instructions and requirements on page 8. See attached Amendment (SF30_SPE8EF24R00010003.PDF). AMENDMENT #2: Solicitation: SPE8EF24R0001, Amendment: 0002 The Closing date for Receipt of Proposals is extended to Wednesday, November 27, 2024. Submit no later than 04:30 PM EST. Proposals and Amendments shall be submitted electronically via email ONLY as explained in the solicitation on page 5. SPE8EF24R0001 is hereby amended to set a new closing date for the purpose of enhancing competition, and clarification/request for additional information regarding Page 11, Section 15, the Manufacturer(s) certification(s). See attached Amendment (SF30_SPE8EF24R00010002.PDF). AMENDMENT #1: Solicitation: SPE8EF24R0001, Amendment: 0001 The Closing date for Receipt of Proposals is extended to Wednesday, November 13th, 2024. Submit no later than 04:30 PM EST. Proposals and Amendments shall be signed and submitted electronically via email ONLY as explained in the solicitation on page 5. SPE8EF24R0001 is hereby amended to clarify instructions, and requirements for proposed pricing. See attached Amendment (SF30_SPE8EF24R00010001.PDF) SOLICITATION: SEE FULL SOLICITATION, AND ANSI MH1-2016 DOCUMENT ON ATTACHMENTS. This solicitation consists of four type of pallets that fall under Federal Stock Class 3990. 3990-00-935-7960 - P/N MH1/9-02SW4048 3990-00-599-5326 - P/N MH1/9-03SW4048 3990-01-041-8803 - P/N MH1/9-05SW4048 3990-00-141-7261 - P/N MH1/9-10BW4048 These Pallets shall be manufactured in accordance with the standard/specifications available from the Approved American National Standard Institute (ANSI) MH1-2016, Part 9 “Wood Pallets for Department of Defense Use”. Pallets shall be manufactured only to the wood species class specified in Table 9-5 of ANSI MH1-2016 document. DoD pallets shall also comply with the ISPM 15 requirements as described in Part 3, Section 12, Phytosanitation of Wood Pallets.

Inactive Total Small Business Set-Aside (FAR 19.5)

Defense Logistics Agency Troop Support is seeking proposals from interested vendors to participate in the acquisition for pallets utilizing an Indefinite Quantity/Indefinite Delivery Type contract. So... Defense Logistics Agency Troop Support is seeking proposals from interested vendors to participate in the acquisition for pallets utilizing an Indefinite Quantity/Indefinite Delivery Type contract. Solicitation SPE8EF-24-R-0001 will provide for the furnishing of new wood pallets which fall under Federal Stock Class 3990. 3990-00-935-7960: ANSI MH1-2016, Part 9. P/N MH1/9-02SW4048 3990-00-599-5326: ANSI MH1-2016, Part 9. P/N MH1/9-03SW4048 3990-01-041-8803: ANSI MH1-2016, Part 9. P/N MH1/9-05SW4048 3990-00-141-7261: ANSI MH1-2016, Part 9. P/N MH1/9-10BW4048 These Pallets shall be manufactured in accordance with the standard/specifications available from the Approved American National Standard Institute (ANSI) - MH1-2016, Part 9 Wood Pallets for Department of Defense Use. Pallets shall be manufactured only to the wood species class specified in Table 9-5 of ANSI MH1-2016 document. DoD pallets shall also comply with the ISPM 15 requirements as described in Part 3, Section 12, Phytosanitation of Wood Pallets. The ANSI MH1-2016 document will be included as an attachment to the Solicitation. The annual estimated demands and the depot locations shall be listed in the Solicitation under the section entitled Schedule of Supplies/Services. The National Stock Numbers (NSNs) covered under the Solicitation are: 3990-00-935-7960, 3990-00-599-5326, 3990-01-041-8803 and 3990-00-141-7261. The items shall be submitted in accordance with the Solicitation section titled, “Statement of Work.” The primary customers will be 14 Defense Distribution Depots located throughout the continental United States. The anticipated Solicitation (SPE8EF-24-R-0001) date is 10/3/2024 and the anticipated closing date is 11/4/2024. These dates are subject to change. The resultant contract will be an Indefinite Quantity/Indefinite Delivery Type contract for a two-year base and three (3) one-year option periods. The estimate for this initiative is $7,082,220.00 million/year with an estimated total cost of $35,411,100.00 million over five years, including options. The Solicitation will be issued as a Total Small Business Set-Aside under FAR Part 12, Commercial Procedures, and will be awarded on a LOWEST PRICED TECHNICALLY ACCEPTABLE (LPTA) basis. DLA intends to make award by depot, and in order to be eligible for award, offerors must submit pricing on all four (4) NSNs per depot to be considered for a particular depot. The overall offered price for each depot will be calculated by multiplying the annual estimated quantity (AEQ) by the offered unit price for each of the four NSNs, then adding those four figures. Accordingly, this Solicitation may result in as few as one or as many as 14 separate contracts. The resultant contract will be Fixed Price with Economic Price Adjustments (EPA). The offeror(s) selected for award must be capable of satisfying DLA Direct and Customer Direct orders on a recurring basis within contractual lead times. The offeror(s) selected for award must be able to support this estimated annual requirement. DLA’s intent is to ensure that the offeror(s) is capable of and committed to meeting our delivery requirements. The production lead time for DLA Direct is 30 days ARO and 7 days ARO for Customer Direct. Delivery is to CONUS customers and stock locations. The shipping terms will be FOB Destination, and Inspection & Acceptance terms at Destination. Award will be made to the lowest priced offeror(s) source selection procedures conforming to the terms and conditions of the Solicitation. In order to be eligible for award, vendors must be registered in the System for Award Management (SAM), https://www.sam.gov/content/home All responsible sources may submit a proposal which shall be considered by the agency. Solicitation will not become available until the solicitation issue date. A copy of the solicitation can be obtained through the DLA Internet Bulletin Board System (DIBBS), https://www.dibbs.bsm.dla.mil/RFP/