AM2 Pallet and Mat Assemblies
DLA Troop Support is requesting information from sources of supply for AM2 Pallet and Mat Assemblies which is used by U.S. Military Forces in expedient air field construction. The mats are a medium-du... DLA Troop Support is requesting information from sources of supply for AM2 Pallet and Mat Assemblies which is used by U.S. Military Forces in expedient air field construction. The mats are a medium-duty, aluminum, landing mats capable of supporting both fighter and cargo aircraft operations. The NSNs are 5680-01-176-9076, 5680-01-371-7337 and 5680-01-371-3724. These items are to be manufactured in accordance with the issued specifications and drawings. Classification Code: 56 NAICS: 332999 “Miscellaneous Fabricated Metal Product Manufacturing” This is a "sources sought" notice, not a Request for Proposal (RFP). This is a Request for Information (RFI) as defined in FAR 15.201(e). Reponses to this RFI are not offers and cannot be accepted by the Government to form a binding contract. The anticipated acquisition will be a 5-year Indefinite Delivery, Indefinite Quantity (IDIQ) contract. Any resulting solicitation will be issued in accordance with FAR Part 15, Negotiation by Contracting. Detailed technical data for the manufacture or acceptance of this item is available from DLA. Suppliers capable of furnishing this item must so indicate by email to magda.gonzalez@dla.mil or reginald.armstead@dla.mil. The contractor will be required to manufacture this item, conduct acceptance tests in accordance with the technical performance specification, and satisfy the Government’s substantial delivery requirements. Responses to this survey must include documentation citing the following: -Contractor’s experience demonstrating the capability to meet the Government’s requirements in producing products that meet all performance requirements, and that are physically and functionally interchangeable with presently identified item. -Quality Standard (Government or Industry) that shall be in place for this effort. -Past Performance for the same or similar items. The contractor shall submit their part numbers, NSN, or nomenclature and the date of the last manufacturing effort of the same or similar items for which they have production experience. Government contract numbers, if applicable, shall be provided. -The contractor must provide information to show it possesses, or shall possess, adequate production plant facilities (equipment, tooling, and space) to enable it, or its subcontractors, to meet production delivery requirements for these items. Reponses to this notice and Market Survey should be emailed to magda.gonzalez@dla.mil or reginald.armstead@dla.mil no later than 3:30PM EST on November 14, 2021. F44 NSN 5680-01-176-9076 14153/03237 PALLET AND MAT ASSYEMPLY F44 3850095 320660 REV Y BAR LOCKING AM 2 MATTING 7047138 513273 REV G MAT EXTRUSION AM2 MOD 4 AND MOD 5 LANDING MAT 7047148 519602 REV H CONNECTOR AM 2 MOD 5 LANDING 519603 REV C INSERT NO I AM 2 MOD 5 LANDING 519604 REV B INSERT NO II AM 2 MOD 5 LANDING 519605 REV C INSERT NO III AM 2 MOD 5 LANDING 519606 REV C INSERT NO IV AM 2 MOD 5 LANDING 621551 REV J EXTRUSION ASSSEMBLY AM 2 MOD 5 LANDING 621552 REV J MAT ASSEMBLY AM 2 MOD 5 LANDING 3920137 01 621555 REV V END FRAM AM2 MAT F71 NSN 5680-01-371-7337 800220/626578 REV J F71 PACKAGE ASSYEMBLY 12-FT AIRFIELD MAT 320660 REV Y BAR LOCKING AM 2 MATTING 513273 REV G MAT EXTRUSION AM2 MOD 4 AND MOD 5 LANDING MAT 519602 REV H CONNECTOR AM 2 MOD 5 LANDING 519603 REV C INSERT NO I AM 2 MOD 5 LANDING 519604 REV B INSERT NO II AM 2 MOD 5 LANDING 519605 REV C INSERT NO III AM 2 MOD 5 LANDING 519606 REV C INSERT NO IV AM 2 MOD 5 LANDING 621551 REV J EXTRUSION ASSSEMBLY AM 2 MOD 5 LANDING 621552 REV J MAT ASSEMBLY AM 2 MOD 5 LANDING 621555 REV V END FRAM AM2 MAT F72 NSN 5680-01-371-3724 800220/626577 REV J F72 PACKAGE ASSYEMBLY 6-FT AIRFIELD MAT 320660 REV Y BAR LOCKING AM 2 MATTING 425139 REV A END SHEET REMOVED 526170 IUID LABEL DWG TO BE REMOVED 513273 REV G MAT EXTRUSION AM2 MOD 4 AND MOD 5 LANDING MAT 519602 REV H CONNECTOR AM 2 MOD 5 LANDING 519603 REV C INSERT NO I AM 2 MOD 5 LANDING 519604 REV B INSERT NO II AM 2 MOD 5 LANDING 519605 REV C INSERT NO III AM 2 MOD 5 LANDING 519606 REV C INSERT NO IV AM 2 MOD 5 LANDING 621551 REV J EXTRUSION ASSSEMBLY AM 2 MOD 5 LANDING 621552 REV J MAT ASSEMBLY AM 2 MOD 5 LANDING 621555 REV V END FRAM AM2 MAT SPECIFICATIONS, STANDARDS AND QAPS NAEC DDR 51-2012 2/7/1990 MPR 1213 REV K (REV “K” NOT IN DLA REPOSITORY) WHERE MPR 1213 IS REFERENCED, THE FOLLOWING CHANGE SHALL APPLY: SHEET 12: PARA. 8.5.3: MIL-DTL-5541, TYPE II, CLASS 1A (SUPERSEDING “MIL-DTL-5541, TYPE II, CLASS IA”). QAP-011769076 F44 FAT (DWG 6282455 00) CDRL-COQC-21026 (QAP 6921725 06) Certificate of Quality Compliance and Test Report(s) RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RQ032: EXPORT CONTROL OF TECHNICAL DATA This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data. The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at: https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/ To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data. RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES ZD080 SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARSPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. IS076 DRAWING CITED IS SUBJECT TO EXPORT-CONTROL REGULATIONS AND DISTRIBUTION IS LIMITED TO THOSE CONTRACTORS QUALIFIED TO RECEIVE RESTRICTED DRAWINGS AS LISTED ON THE CERTIFIED CONTRACTORS ACCESS LIST (CCAL). APPLICATION MUST BE MADE ON DD FORM 2345, "MILITARY CRITICAL TECHNICAL DATA AGREEMENT." COPIES OF THIS FORM ARE AVAILABLE BY WRITING TO: COMMANDER, DLA LOGISTICS INFORMATION SERVICE ATTN: DLIS-F, FEDERAL CENTER, BATTLE CREEK, MI 49016-3412. CONTRACTS WILL BE AWARDED ONLY TO THOSE CONTRACTORS APPEARING ON THE CCAL PRIOR TO AN AWARD. IN001 UNLESS OTHERWISE NOTED FIRST ARTICLE TESTING IS REQUIRED RD002, COVERED DEFENSE INFORMATION APPLIES RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED MANUFACTURERS LIST (QML)" APPLY. ZD090 Certificate of Quality Compliance (CoQC) Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-COQCCDRLs is missing from DLA Collaboration Folders (CFolders) they can also be viewed in Appendix 1 of the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx EXCEPTIONS MPR 1213 REV K (REV “K” NOT IN DLA REPOSITORY) WHERE MPR 1213 IS REFERENCED, THE FOLLOWING CHANGE SHALL APPLY: SHEET 12: PARA. 8.5.3: MIL-DTL-5541, TYPE II, CLASS 1A (SUPERSEDING “MIL-DTL-5541, TYPE II, CLASS IA”). DWG 526170 (IUID LABEL) REMOVED FROM CONTRACT PACKAGE. THE FOLLOWING WILL BE EXCEPTIONS FOR DWGs 626577 AND 626578. MANUFACTURES NAME AND CAGE CODE WILL REPLACE "NAVAIR COG.MATL" AND "PMA251." IUID LABELS WILL BE OMITTED
Data sourced from SAM.gov.
View Official Posting »