Inactive

Inactive Total Small Business Set-Aside (FAR 19.5)

SOLICITATION OPENS 3/22/2022 AND CLOSES 4/21/2022

Inactive Total Small Business Set-Aside (FAR 19.5)

Project CM21282006 is for two (2) NSNs. Each NSN has an estimated annual demand of the following: NSN ADQ 4810-01-084-5981 207 4820-01-059-2297 43 This acquisition is for a Fixed Price, Indefinite Qua... Project CM21282006 is for two (2) NSNs. Each NSN has an estimated annual demand of the following: NSN ADQ 4810-01-084-5981 207 4820-01-059-2297 43 This acquisition is for a Fixed Price, Indefinite Quantity Contract (IQC). FAR Part 15 – Contracting by Negotiation. The proposed procurement contains a one-year (1-year) base period plus two (2) option years. The total contract period shall not exceed three (3) years. Award will be made on an ALL OR NONE BASIS per NSN for items supplied covered under this contract. Copies of the solicitation is available at the https://www.dibbs.bsm.dla.mil/RFP/ and available approximately 15 days after this notice is published in SAM.gov. The approved sources are as follows: NSN CAGE COMPANY NAME PART NUMBER _ 4810-01-084-5981 86090 Eaton Corporation 61269 4810-01-084-5981 92003 Parker Hannifin 2820124-102 4810-01-084-5981 0TR84 United Valve Company 2820124-102 4810-01-084-5981 1523A TAT Technologies 5116-2 4820-01-059-2297 86090 Eaton Corporation 60840 4820-01-059-2297 92003 Parker Hannifin 2830157-102 This solicitation is a Total Small Business set-aside. All offers shall be in the English language and in US dollars. The Contracting Officer may utilize on-line Reverse Auctioning as a means of conducting price discussions under this solicitation. The solicitation shall be available in DIBBS on or about March 22, 2022. All responsible sources may submit an offer/quote which shall be considered. (X) PART NUMBER: Specifications, plans, or drawings related to the procurement described are not available and cannot be furnished by the Government. (X) 1 100% Set-Aside for Small Business (X) 12 Trade Agreements Acts (X) 26 Commercial Notice (when the Government does not intend to use Part 12, Commercial Acquisition Procedures)(FAR 5.206(e)(4)) (X) The final contract award decision may be based upon a combination of price, past performance, and other evaluation factors as described in the solicitation. - *** LTC PID Packaging Consolidated Text *** - PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN. NSN:010845981 VALVE,FUEL SHUT-OFF REFERENCE NUMBER:RQ032 REFERENCE NUMBER:RD002 REFERENCE NUMBER:RP001 REFERENCE NUMBER:RA001 REFERENCE NUMBER:RQ002 REFERENCE NUMBER:RQ011 Mark per MIL-STD-130 REFERENCE NUMBER:CS120 REFERENCE NUMBER:CS187 REFERENCE NUMBER:ZD025 CRITICAL APPLICATION ITEM PARKER HANNIFIN CORPORATION DIV 92003 P/N 2820124-102 UNITED VALVE COMPANY, DIV OF FEDERAL 0TR84 P/N 2820124-102 TAT TECHNOLOGIES LTD. 1523A P/N 5116-2 EATON CORPORATION 86090 P/N 61269 IAW BASIC DRAWING NR 72429 50295 REVISION NR L DTD 07/11/1984 PART PIECE NUMBER: P/N 50295-5 IAW REFERENCE DRAWING NR 72429 43.603 REVISION NR E DTD 08/26/1988 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 72429 50295 REVISION NR DTD 07/03/2019 PART PIECE NUMBER: IAW REFERENCE SPEC NR MS33786B NOT 1 REVISION NR B DTD 09/14/2018 PART PIECE NUMBER: IAW REFERENCE NON GOVT STD NASM21209 REVISION NR DTD PART PIECE NUMBER: IAW REFERENCE NON GOVT STD SAE AS4395B REVISION NR DTD PART PIECE NUMBER: PREP FOR DELIVERY LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS PKGING DATA-QUP:001 WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951. NSN:010592297 VALVE,SAFETY RELIEF REFERENCE NUMBER:RP001 REFERENCE NUMBER:RQ032 REFERENCE NUMBER:RD002 REFERENCE NUMBER:RA001 REFERENCE NUMBER:RQ002 REFERENCE NUMBER:RQ011 BURST PRESSURE 60 PSI. END ITEM -ACFT, TYPE F-16A, B, C AND D. REFERENCE NUMBER:CS241 REFERENCE NUMBER:ZD025 CRITICAL APPLICATION ITEM PARKER HANNIFIN CORPORATION DIV 92003 P/N 2830157-102 EATON CORPORATION 86090 P/N 60840 IAW REFERENCE DRAWING NR 81755 16VP038 REVISION NR T DTD 12/16/2002 PART PIECE NUMBER: PREP FOR DELIVERY LINE ITEM 00002 TYPE OF COVERAGE: DLA DIRECT, CONUS PKGING DATA-QUP:001 WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951. ************************************************************************************************************ GLOSSARY ************************************************************************************************************ PACKAGING TEXT THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT: All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT ITEM DESCRIPTION TEXT REFERENCE NUMBER RP001 RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT REFERENCE NUMBER RQ032 RQ032: EXPORT CONTROL OF TECHNICAL DATA This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data. The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at: https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/ To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data. REFERENCE NUMBER RD002 RD002, COVERED DEFENSE INFORMATION APPLIES REFERENCE NUMBER RA001 RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. REFERENCE NUMBER RQ002 RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER) REFERENCE NUMBER RQ011 RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES REFERENCE NUMBER CS241 NOTE: THIS IS A RESTRICTED SOURCE ITEM AND REQUIRES ENGINEERING SOURCE APPROVAL BY THE GOVERNMENT DESIGN CONTROL ACTIVITY. REFERENCE NUMBER ZD025 MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D). REFERENCE NUMBER CS120 NOTE: THE CITED DRAWING IS A SOURCE CONTROLLED DRAWING AND AS OF THE DATE OF THIS SOLICITATION ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE BEEN APPROVED. EVEN THOUGH SOURCES AND APPROVED PART NUMBERS ARE PROVIDED, THE ITEMS FURNISHED MUST MEET THE REQUIREMENTS OF THE CITED DRAWING. OFFERORS WHO ARE INTERESTED IN QUALIFYING THEIR PRODUCT FOR PURPOSE OF FUTURE ACQUISITION MUST CONTACT THE COGNIZANT DESIGN ACTIVITY SPECIFIED ON THE SOURCE CONTROLLED DRAWING. ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT THIS TIME. REFERENCE NUMBER CS187 CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS.

Inactive

DLA Land and Maritime is preparing to solicit an Indefinite Delivery Contract (IDC) for NSNs 4810-01-084-5981 and 4820-01-059-2297, manufactured by various OEMs (see attached spreadsheet). This acquis... DLA Land and Maritime is preparing to solicit an Indefinite Delivery Contract (IDC) for NSNs 4810-01-084-5981 and 4820-01-059-2297, manufactured by various OEMs (see attached spreadsheet). This acquisition is for supplies for which the Government does not possess complete and unrestrictive technical data, therefore the Government intends to solicit and contract with only the approved source(s) under the authority of 10 U.S.C. 2304(c)(1). Alternate offerors will be required to provide a complete data package including data for the approved and alternate part for evaluation to be used on future procurements. The solicitation is anticipated to require FOB Origin and Inspection and Acceptance at Destination. This SOURCES SOUGHT notice is for informational and planning purposes only and shall not be construed as a solicitation or as an obligation or commitment by the Government. This notice is intended strictly for market research to obtain information regarding the availability and capability of qualified businesses that are capable of executing this potential contract. Your response to the information requested will assist the Government in determining the appropriate acquisition method. The solicitation/request for proposal will be forth coming. An Indefinite Delivery Contract (IDC) with a base period of one (1) year and two (2) option years is anticipated. Option years exercised at the discretion of the Government. Multiple delivery orders may be written against the basic contract for a maximum of five years. Various incremental quantities will be solicited. Deliveries may be to various DLA stocking locations. While price will be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance, and other evaluation factors as described in the solicitation. When issued, the Solicitation/Request for Proposal will be listed on the DLA Internet Bid Board System (DIBBS) website at http://dibbs.dscc.dla.mil/rfp/. Sources interested in offering on this solicitation should complete the attached market survey and return the completed copy to Eukia Bryant at eukia.bryant@dla.mil by February 8, 2021.