Inactive
Total Small Business Set-Aside (FAR 19.5)
Notice ID:SPE7MX-22-R-0013
Project CM21285004 is for three (3) NSNs. Each NSN has an estimated annual demand of the following: NSN ADQ 4320-00-035-6652 51 4820-00-670-9846 587 5340-01-434-0365 139 This acquisition is for a Fixe...
Project CM21285004 is for three (3) NSNs. Each NSN has an estimated annual demand of the following: NSN ADQ 4320-00-035-6652 51 4820-00-670-9846 587 5340-01-434-0365 139 This acquisition is for a Fixed Price, Indefinite Quantity Contract (IQC). FAR Part 15 – Contracting by Negotiation. The proposed procurement contains a one-year (1-year) base period plus two (2) option years. The total contract period shall not exceed three (3) years. Award will be made on an ALL OR NONE BASIS per NSN for items supplied covered under this contract. Copies of the solicitation is available at the https://www.dibbs.bsm.dla.mil/RFP/ and available approximately 15 days after this notice is published in SAM.gov. The approved sources are as follows: NSN CAGE COMPANY NAME PART NUMBER _ 4320-00-035-6652 00994 Columbus Jack Corporation 51D7139 4820-00-670-9846 00994 Columbus Jack Corporation 915-16A-6 5340-01-434-0365 00994 Columbus Jack Corporation CJ69B1279 This solicitation is a Total Small Business set-aside. All offers shall be in the English language and in US dollars. The Contracting Officer may utilize on-line Reverse Auctioning as a means of conducting price discussions under this solicitation. The solicitation shall be available in DIBBS on or about December 2, 2021. All responsible sources may submit an offer/quote which shall be considered. (X) PART NUMBER: Specifications, plans, or drawings related to the procurement described are not available and cannot be furnished by the Government. (X) 1 100% Set-Aside for Small Business (X) 12 Trade Agreements Acts (X) 22 Sole Source (FAR 6.302) (X) 26 Commercial Notice (when the Government does not intend to use Part 12, Commercial Acquisition Procedures)(FAR 5.206(e)(4)) (X) The final contract award decision may be based upon a combination of price, past performance, and other evaluation factors as described in the solicitation. - *** LTC PID Packaging Consolidated Text *** - PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN. NSN:4320-00-035-6652 PUMP, HYDRAULIC. REFERENCE NUMBER:RP001 REFERENCE NUMBER:RA001 REFERENCE NUMBER:RQ011 TRIPOD JACK. 5 TON CAPACITY. REFERENCE NUMBER:CA061 CRITICAL APPLICATION ITEM COLUMBUS JACK CORPORATION 00994 P/N 51D7139 PREP FOR DELIVERY LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP:001 PRES MTHD:BL CLNG/DRY:1 PRESV MAT:15 WRAP MAT:00 CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:B UNIT CONT:EC OPI:M INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT WHEN WT.LIMITATION OF PPP-B-636 ARE EXCEEDED A PPP-B-601 OR PPP-B-621 OVERSEAS STYLE SHALL BE USED FOR THE UNIT/SHIPPING CONTAINER. NSN:4820-00-670-9846 VALVE, SAFETY RELIEF USED ON 25 TON UNIVERSAL LANDING GEAR JACK. GROUND SUPPORT EQUIPMENT FOR THE F/A-18 HORNET AIRCRAFT. REFERENCE NUMBER:RP001 REFERENCE NUMBER:RA001 REFERENCE NUMBER:RQ011 REFERENCE NUMBER:CS241 REFERENCE NUMBER:CS199 REFERENCE NUMBER:A1202 REFERENCE NUMBER:CA060 CRITICAL APPLICATION ITEM COLUMBUS JACK CORPORATION 00994 P/N 915-16A-6 PREP FOR DELIVERY LINE ITEM 00002 TYPE OF COVERAGE: DLA DIRECT, CONUS PKGING DATA-QUP:001 WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951. NSN:5340-01-434-0365 CASTER, SWIVEL REFERENCE NUMBER:RA001 REFERENCE NUMBER:RP001 REFERENCE NUMBER:RQ011 CRITICAL APPLICATION ITEM COLUMBUS JACK CORPORATION 00994 P/N CJ69B1279 PREP FOR DELIVERY LINE ITEM 00003 TYPE OF COVERAGE: DLA DIRECT, CONUS PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951. ************************************************************************************* GLOSSARY ************************************************************************************* PACKAGING TEXT THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT: All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT ITEM DESCRIPTION TEXT REFERENCE NUMBER RP001 RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT REFERENCE NUMBER RA001 RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. REFERENCE NUMBER RQ011 RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES REFERENCE NUMBER CA061 ADEQUATE DATA FOR THE EVALUATION OF ALTERNATE OFFERS IS NOT AVAILABLE AT THE PROCUREMENT AGENCY.THE OFFEROR MUST PROVIDE A COMPLETE DATA PACKAGE INCLUDING DATA FOR THE APPROVED AND ALTERNATE PART FOR EVALUATION. REFERENCE NUMBER CS241 NOTE: THIS IS A RESTRICTED SOURCE ITEM AND REQUIRES ENGINEERING SOURCE APPROVAL BY THE GOVERNMENT DESIGN CONTROL ACTIVITY. REFERENCE NUMBER CS199 ALTERNATE OFFEROR REQUIREMENTS: THE FOLLOWING DOCUMENTATION IS REQUIRED IN ACCORDANCE WITH MIL-T-31000. (A) ALL DRAWINGS AND SPECIFICATIONS REQUIRED FOR MANUFACTURE. (B) PROCESS/OPERATION SHEETS WHICH DESCRIBE IN DETAIL EACH CRITICAL PROCESS AND ASSOCIATED INSPECTION/ACCEPTANCE CRITERIA. (C) IDENTIFICATION OF SOURCES WHO WILL PERFORM CRITICAL PROCESSES/OPERATIONS, INCLUDING SOURCES OF FORGINGS AND CASTINGS. (D) IF AVAILABLE COPIES OF PURCHASE ORDERS FROM THE ITEM. (E) A SHOCK EXTENSION REPORT IN ACCORDANCE WITH MIL-S-901 AND IN A FORMAT AS SPECIFIED IN DI-ENVR-80706 IS REQUIRED. IF THE OEM'S DETAILED DRAWINGS ARE NOT AVAILABLE, THE OFFEROR MUST SUPPLY AN ENGINEERING ANALYSIS REPORT WHICH DETAILS HOW THEIR DRAWINGS WERE DEVELOPED. ADDITIONALLY, IF REVERSE ENGINEERING WAS USED, THE COMPLETE PROCEDURE WILL BE REPORTED INCLUDING: NUMBER OF SAMPLES, METHODS AND MEASURES USED, ALL DATA COMPILED, RATIONALE FOR DIMENSION TOLERANCE DEVIATION, AND RATIONALE FOR ACCEPTANCE. THIS DATA WILL BE FORWARDED TO THE ENGINEERING SUPPORT ACTIVITY FOR EVALUATION. REFERENCE NUMBER A1202 Casting/forging may be required to manufacture this NSN. If a casting/forging is required, tooling is typically involved. The government may not have this special tooling. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C&E Supply Chains) DSCR.AFCAT@dla.mil; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil REFERENCE NUMBER CA060 NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE INCLUDING DATA FOR THE APPROVED AND ALTERNATE PART FOR EVALUATION. REFERENCE NUMBER IP025 IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
