Inactive

Inactive

Solicitation closes 11/05/2021 at 11:59:59 pm

Inactive

This requirement is for four (4) NSNs. Each NSN has an estimated annual demand of the following: NSN ADQ 5998-01-542-9252 3 5998-01-542-9253 8 5998-01-542-9268 6 5998-01-542-9338 6 This acquisition is... This requirement is for four (4) NSNs. Each NSN has an estimated annual demand of the following: NSN ADQ 5998-01-542-9252 3 5998-01-542-9253 8 5998-01-542-9268 6 5998-01-542-9338 6 This acquisition is for a Fixed Price, Indefinite Quantity Contract (IQC). FAR Part 15 – Contracting by Negotiation. The proposed procurement contains a one-year (1-year) base period plus four (4) option years. The total contract period shall not exceed five (5) years. Award will be made on an ALL OR NONE BASIS per NSN for items supplied covered under this contract. Copies of the solicitation is available at the https://www.dibbs.bsm.dla.mil/RFP/ and available approximately 15 days after this notice is published in beta.SAM.gov. The approved sources are as follows: NSN CAGE COMPANY NAME PART NUMBER 5998-01-542-9252 06659 Testek, LLC 320191-P3 5998-01-542-9253 06659 Testek, LLC 320192-P2 5998-01-542-9268 06659 Testek, LLC 320194-P4 5998-01-542-9338 06659 Testek, LLC 320175-P2 This solicitation is UNRESTRICTED. All offers shall be in the English language and in US dollars. The Contracting Officer may utilize on-line Reverse Auctioning as a means of conducting price discussions under this solicitation. The solicitation shall be available in DIBBS on or about October 6, 2021. All responsible sources may submit an offer/quote which shall be considered. (X) PART NUMBER: Specifications, plans, or drawings related to the procurement described are not available and cannot be furnished by the Government. (X) 22 Sole Source (FAR 6.302) (X) 26 Commercial Notice (when the Government does not intend to use Part 12, Commercial Acquisition Procedures)(FAR 5.206(e)(4)) (X) Unrestricted (X) The final contract award decision may be based upon a combination of price, past performance, and other evaluation factors as described in the solicitation. - *** LTC PID Packaging Consolidated Text *** - PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN. NSN:015429252 CIRCUIT CARD ASSEMBLY REFERENCE NUMBER:RP001 REFERENCE NUMBER:RD002 REFERENCE NUMBER:RA001 REFERENCE NUMBER:RQ011 TESTEK, LLC 06659 P/N 320191-P3 PREP FOR DELIVERY LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP:001 PRES MTHD:GX CLNG/DRY:1 PRESV MAT:00 WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C UNIT CONT:D3 OPI:M INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:39 -39 ESD sensitiv electrnic dvce PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT REFERENCE NUMBER:ZDESD NSN:015429253 ITEM NAME: CIRCUIT CARD ASSEMBLY REFERENCE NUMBER:RP001 REFERENCE NUMBER:RD002 REFERENCE NUMBER:RA001 REFERENCE NUMBER:RQ011 REFERENCE CONTROL NUMBER: 320192-P2 CAGE 06659 ELECTRO-STATIC SENSITIVE DEVICE END ITEM IDENTIFICATION: F-18 E/F FIGHTER AIRCRAFT REFERENCE NUMBER:E0115 TESTEK, LLC 06659 P/N 320192-P2 PREP FOR DELIVERY LINE ITEM 00002 TYPE OF COVERAGE: DLA DIRECT, CONUS PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP:001 PRES MTHD:GX CLNG/DRY:1 PRESV MAT:00 WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C UNIT CONT:D3 OPI:M INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:39 -39 ESD sensitiv electrnic dvce PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT REFERENCE NUMBER:ZDESD NSN:015429268 ITEM NAME: CIRCUIT CARD ASSEMBLY REFERENCE NUMBER:RD002 PART NAME ASSIGNED BY CONTROLLING AGENCY: COMPONENT LAYOUT - BOARD,RELAYS - CARD 9 REFERENCE CONTROL NUMBER: P/N 320194-P4 CAGE 06659 (Replaces P/N 320194-P3 CAGE 06659) ELECTRO-STATIC SENSITIVE DEVICE END ITEM IDENTIFICATION: FIGHTER AIRCRAFT-FIRST F18 E/F (END ITEM),TEST SET ELEC POWER;BUFFER ASSEMBLY (NHA) REFERENCE NUMBER:RP001 REFERENCE NUMBER:RA001 REFERENCE NUMBER:RQ002 REFERENCE NUMBER:RQ011 TESTEK, LLC 06659 P/N 320194-P4 PREP FOR DELIVERY LINE ITEM 00003 TYPE OF COVERAGE: DLA DIRECT, CONUS PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP:001 PRES MTHD:GX CLNG/DRY:1 PRESV MAT:00 WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C UNIT CONT:D3 OPI:M INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:39 -39 ESD sensitiv electrnic dvce PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT REFERENCE NUMBER:ZDESD NSN:015429338 CIRCUIT CARD ASSEMBLY REFERENCE NUMBER:RP001 REFERENCE NUMBER:RD002 REFERENCE NUMBER:RA001 REFERENCE NUMBER:RQ011 E/I: TEST SET,ELECTRICAL: F/A-18 AIRCRAFT REFERENCE NUMBER:E0115 TESTEK, LLC 06659 P/N 320175-P2 PREP FOR DELIVERY LINE ITEM 00004 TYPE OF COVERAGE: DLA DIRECT, CONUS PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP:001 PRES MTHD:GX CLNG/DRY:1 PRESV MAT:00 WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C UNIT CONT:ZZ OPI:M INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:39 -39 ESD sensitiv electrnic dvce PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT REFERENCE NUMBER:ZDESD ************************************************************************************************************ GLOSSARY ************************************************************************************************************ PACKAGING TEXT THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT: ITEM DESCRIPTION TEXT REFERENCE NUMBER RP001 RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT REFERENCE NUMBER RD002 RD002, COVERED DEFENSE INFORMATION APPLIES REFERENCE NUMBER RA001 RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. REFERENCE NUMBER RQ011 RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES REFERENCE NUMBER ZDESD ESD and PHYSICAL protection are required for contacts, leads, terminals, and other protrusions by means of container design, cushioning, and/or other ESD protective devices. Components with pins or leads shall have adequate cushioning to PREVENT DAMAGE, BREAKAGE and/or BENDING OF LEADS when not specified in the packaging codes. This item requires DOD QUALIFIED Electrostatic Discharge (ESD) and/or Electromagnetic Interference (EMI) protective packaging materials in accordance with MIL-PRF-81705. All items subject to degradation from ESD/EMI environmental field forces shall be handled and packaged at an approved field force protective work station. For ESD protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used along with MIL-PRF-81705, Type III (MIL-DTL-117 Type II, Class H, Style 2) barrier material wrap if the contract doesn't specifically require ESD approved cushioning. For EMI protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used. The supplier shall be responsible for verifying that all MIL-PRF-81705 barrier materials (or converted bags) were supplied from a qualified manufacturer currently listed on QPL-81705. For additional ESD/EMI packaging information, refer to the following DLA packaging website: https://www.dla.mil/HQ/LogisticsOperations/Packaging/PackFAQs/ESDS/ If the preservation method code in the solicitation does not specify ESD/EMI protection and the Offeror's proposed item of supply is subject to degradation from ESD/EMI environmental field forces, Offerors shall provide appropriate technical packaging data with their proposals. REFERENCE NUMBER E0115 NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE INCLUDING DATA FOR THE APPROVED AND ALTERNATE PART FOR EVALUATION. REFERENCE NUMBER RQ002 RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

Inactive

DLA Land and Maritime is preparing to solicit an Indefinite Delivery Contract (IDC) for multiple NSNs (see attached spreadsheet) manufactured by Testek, LLC (06659). This acquisition is for supplies f... DLA Land and Maritime is preparing to solicit an Indefinite Delivery Contract (IDC) for multiple NSNs (see attached spreadsheet) manufactured by Testek, LLC (06659). This acquisition is for supplies for which the Government does not possess complete and unrestrictive technical data, therefore the Government intends to solicit and contract with only the approved source(s) under the authority of 10 U.S.C. 2304(c)(1). Alternate offerors will be required to provide a complete data package including data for the approved and alternate part for evaluation to be used on future procurements. The solicitation is anticipated to require FOB Origin and Inspection and Acceptance at Destination. This SOURCES SOUGHT notice is for informational and planning purposes only and shall not be construed as a solicitation or as an obligation or commitment by the Government. This notice is intended strictly for market research to obtain information regarding the availability and capability of qualified businesses that are capable of executing this potential contract. Your response to the information requested will assist the Government in determining the appropriate acquisition method. The solicitation/request for proposal will be forth coming. An Indefinite Delivery Contract (IDC) with a base period of one year and four option years is anticipated. Option years exercised at the discretion of the Government. Multiple delivery orders may be written against the basic contract for a maximum of five years. Solicitation will be issued as "Unrestricted". Various incremental quantities will be solicited. Deliveries may be to various DLA stocking locations. While price will be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance, and other evaluation factors as described in the solicitation. When issued, the Solicitation/Request for Proposal will be listed on the DLA Internet Bid Board System (DIBBS) website at http://dibbs.dscc.dla.mil/rfp/. Sources interested in offering on this solicitation should complete the attached market survey and return the completed copy to Eukia Bryant at eukia.bryant@dla.mil by September 9, 2021.