Inactive

All responsible sources may submit an offer/quote which shall be considered. The solicitation will be available in DIBBS on its issue date on or after 04/16/2025. This solicitation will be available o... All responsible sources may submit an offer/quote which shall be considered. The solicitation will be available in DIBBS on its issue date on or after 04/16/2025. This solicitation will be available on the Internet at https://www.dibbs.bsm.dla.mil/ . Due to system constraints, it may take as long as three business days from the stated issue date for the solicitation to post to DIBBS. While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation. One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the United States by the Trade Agreements Act of 1979. All offers shall be in the English language and in U.S. dollars. All interested suppliers may submit an offer. Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice. Manufacturer’s Code and Part Number. Specifications, plans or drawings are not available: This acquisition is for supplies for which the Government does not possess complete, unrestrictive technical data; therefore, the Government intends to solicit and contract with only approved sources under the authority of 10 U.S.C. 2304(c)(1). Approved source is: Reinhold Industries Inc. 2D301 P/N 5268342 Quantity, including any options for additional quantities: 321 EA Various Increments Solicited (as EACH): FROM: 1 TO: 80 FROM: 81 TO: 160 FROM: 161 TO: 240 FROM: 241 TO: 321 Unit of issue: EACH Destination information: Inspection/Acceptance at Destination, FOB at Origin IAW First Destination Transportation Delivery schedule: 201 days ADO Enhanced JCP Applies: The solicitation document contains information that has been designated as "Militarily Critical Technical Data." Only businesses that have been certified by the Department of Defense, United States/Canada Joint Certification Office, and have a valid requirement may have a copy of the solicitation document. All requests for copies of the solicitation document must include a certified copy of DD Form 2345, Militarily Critical Technical Data Agreement. To obtain certification, contact: Commander, Defense Logistics Information Service (DLIS), ATTN: U.S./Canada Joint Certification Office, 74 Washington Avenue North, Battle Creek, MI 49017-3084 or call the DLIS at (800)-352-3572. The DLIS Unites States/Canada Joint Certification Lookup service is available via the Internet at: http://www.dlis.dla.mil/ccal/. Procurement Item Description Text: Propeller, Forward The only approved source of supply is Reinhold, CAGE (2D301), P/N 5268342. RA001: This document incorporates technical and/or quality requirements (Identified by an R or an I number in Section B) set forth in full text in the DLA Master List of Technical and Quality Requirements found on the web at: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. For Simplified Acquisitions, the revision of the Master in effect on the solicitation issue date or the award date controls. For large acquisitions, the revision of the Master in effect on the RFP controls. For large acquisitions, the revision of the Master in effect on the RFP issue date applies unless a solicitation amendment incorporates a follow-on revision in which case the amendment controls. RQ032: Export Control of Technical Data This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data. The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at: https://www.dla.mil/Logistics-Operations/Enhanced-Validation/ To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data. RD002: Covered Defense Information Applies RP001: DLA Packaging Requirements for Procurement RQ001: Tailored Higher Level Contract Quality Requirements (Manufacturers and Non-Manufacturers) RQ002: Configuration Change Management – Engineering Change Proposal Request for Variance (Deviation or Waiver) RQ011: Removal of Government Identification from Non-Accepted Supplies Certificate of Conformance Procedures (FAR 52.246-15) are authorized, unless withheld by a Quality Assurance Letter of Instruction. Class I Ozone Depleting Chemicals are not to be used nor incorporated in any items to be delivered under this contract. This prohibition supersedes all specification requirements but does not alleviate any product requirements. Substitute chemicals must be submitted for approval unless they are authorized by the specification requirements. Mercury or mercury containing compounds shall not be intentionally added to, or come in direct contact with, any hardware or supplies furnished under this contract. Exception: Functional mercury used in batteries, fluorescent lights, required instruments; sensors or controls; weapon systems; and chemical analysis reagents specified by NAVSEA. Portable fluorescent lamps and portable instruments containing mercury shall be shock proof and contain a second boundary of containment of the mercury or mercury compound (IAW NAVSEA 5100-003D). Preservation of Material – All bare metal shall be properly preserved to prevent corrosion. All moving parts shall be properly lubricated. Each item shall be individually packaged. Package design must immobilize item within container to adequately package and protect item. Unit container selection must adequately contain material. Container seal must prevent item from bottoming out and/or puncturing through container. Special Notice for Marking and Serial Number Requirement: Per general note call out on drawing 5268342 (53711), individual serial numbers are to be etched on the propellors in location shown. Contractor is responsible for obtaining serial numbers from NUWC, Keyport as specified. Marking requirements are to be performed after balancing holes are drilled to prevent obscuring marking. The POC on this matter at NUWC Keyport is: Elizabeth Barnes Elizabeth.R.Barnes11.civ@us.navy.mil 360-315-8459 Reinhold Industries Inc. 2D301 P/N 5268342 IAW REFERENCE DRAWING NR 53711 5268344 REVISION NR D DTD 08/08/2022 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 53711 5268342 REVISION NR K DTD 03/17/2020 PART PIECE NUMBER: Packaging Text: PKGING DATA - MIL-STD-2073-1E QUP: 001 PRES MTHD:20 CLNG/DRY:1 PRESV MAT:49 WRAP MAT: GC CUSH/DUNN MAT: JC CUSH/DUNN THKNESS:C UNIT CONT: E8 OPI:M PACK CODE: U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:40 -40 Omission of mark for sensit Palletization shall be in accordance with RP001: DLA Packaging Requirements for Procurement PRESERVATIVE MATERIAL: ZZ – Use 49 preservation material as follows: All bare metal shall be properly preserved to prevent corrosion. All moving parts shall be properly lubricated. Each item shall be individually packaged. Package design must immobilize item within container to adequately package and protect item. Unit container selection must adequately contain material. Container seal must prevent item from bottoming out and/or puncturing through container.

Inactive

DLA Land and Maritime is preparing to solicit a one-time buy for 600 each, NSN 2010-011372013, propeller, forward. The approved manufacturer and part number for this NSN is: Reinhold Industries Inc. (... DLA Land and Maritime is preparing to solicit a one-time buy for 600 each, NSN 2010-011372013, propeller, forward. The approved manufacturer and part number for this NSN is: Reinhold Industries Inc. (2D301) p/n 5268342 The applicable North American Classification System (NAICS) code is 336419 with a business size of 1,050 employees. DLA Land and Maritime does not possess technical data for this NSN. Sources interested in becoming an approved source for this NSN must submit the appropriate information as outlined in Procurement Notes L04 – Offers for Part Numbered Items and M06 – Evaluation of Offers for Part Numbered Items. This sources-sought notice is for informational and planning purposes only and shall not be construed as a solicitation or as an obligation or commitment by the Government. This notice is intended strictly for market research. This is NOT a solicitation for proposals, proposal abstracts, or quotations. No solicitation exists at this time. The purpose of this notice is to obtain information regarding the availability and capability of qualified businesses that are capable of executing this potential contract. The Government is not obligated and will not pay for any information received from potential sources as a result of this notice. Your response to the information requested will assist the Government in determining the appropriate acquisition method. Sources interested in providing an offer on this solicitation should complete the attached market survey and return the completed copy to Mandy Phipps-Kuhlman via email at mandy.phipps-kuhlman@dla.mil by 4:00 PM EST on 07/15/2024. ********** PROPELLER, FORWARD The only approved source of supply is Reinhold, CAGE (2D301), P/N 5268342. RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ032: EXPORT CONTROL OF TECHNICAL DATA This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR) and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data. The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at: https://www.dla.mil/Logistics-Operations/Enhanced-Validation/ To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data. RD002, COVERED DEFENSE INFORMATION APPLIES RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS) RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER) RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES CERTIFICATE OF CONFORMANCE PROCEDURES (FAR 52.246-15) ARE AUTHORIZED, UNLESS WITHELD BY A QUALITY ASSURANCE LETTER OF INSTRUCTION. CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS. MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO OR COME IN DIRECT CONTACT WITH ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D). PRESERVATION OF MATERIAL - ALL BARE METAL SHALL BE PROPERLY PRESERVED TO PREVENT CORROSION. ALL MOVING PARTS SHALL BE PROPERLY LUBRICATED. EACH ITEM SHALL BE INDIVIDUALLY PACKAGED. PACKAGE DESIGN MUST IMMOBILIZE ITEM WITHIN CONTAINER TO ADEQUATELY PACKAGE AND PROTECT ITEM. UNIT CONTAINER SELECTION MUST ADEQUATELY CONTAIN MATERIAL. CONTAINER SEAL MUST PREVENT ITEM FROM BOTTOMING OUT AND/OR PUNCTURING THROUGH CONTAINER. SPECIAL NOTICE FOR MARKING AND SERIAL NUMBER REQUIREMENT: PER GENERAL NOTE CALL OUT ON DRAWING 5268342 (53711), INDIVIDUAL SERIAL NUMBERS ARE TO BE ETCHED ON THE PROPELLORS IN LOCATION SHOWN. CONTRACTOR IS RESPONSIBLE TO OBTAIN SERIAL NUMBERS FROM NUWC, KEYPORT AS SPECIFIED. MARKING REQUIREMENTS ARE TO BE PERFORMED AFTER BALANCING HOLES ARE DRILLED TO PREVENT OBSCURING MARKING. THE POC ON THIS MATTER AT NUWC KEYPORT IS: ELIZABETH BARNES ELIZABETH.R.BARNES11.CIV@US.NAVY.MIL 360-315-8459 REINHOLD INDUSTRIES INC 2D301 P/N 5268342 IAW REFERENCE DRAWING NR 53711 5268344 REVISION NR D DTD 08/08/2022 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 53711 5268342 REVISION NR K DTD 03/17/2020 PART PIECE NUMBER: PKGING DATA - MIL-STD-2073-1E QUP: 001 PRES MTHD:20 CLNG/DRY:1 PRESV MAT:49 WRAP MAT: GC CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:C UNIT CONT: E8 OPI:M PACK CODE: U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:40 -40 Omission of mark for sensit PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PRESERVATIVE MATERIAL: ZZ - USE 49 PRESERVATION MATERIAL AS FOLLOWS - ALL BARE METAL SHALL BE PROPERLY PRESERVED TO PREVENT CORROSION. ALL MOVING PARTS SHALL BE PROPERLY LUBRICATED. EACH ITEM SHALL BE INDIVIDUALLY PACKAGED. PACKAGE DESIGN MUST IMMOBILIZE ITEM WITHIN CONTAINER TO ADEQUATELY PACKAGE AND PROTECT ITEM. UNIT CONTAINER SELECTION MUST ADEQUATELY CONTAIN MATERIAL. CONTAINER SEAL MUST PREVENT ITEM FROM BOTTOMING OUT AND/OR PUNCTURING THROUGH CONTAINER.