Inactive Total Small Business Set-Aside (FAR 19.5)

The response date referenced is estimated. Issue date is on or around 11/12/2024, with the Response date on or around 12/16/2024. Note: Copies of this solicitation will only be available via the World... The response date referenced is estimated. Issue date is on or around 11/12/2024, with the Response date on or around 12/16/2024. Note: Copies of this solicitation will only be available via the World Wide Web approximately 15 days after this notice is published (solicitation should be posted on or around 11/12/2024). The DSCC Website address (URL) is https://www.dibbs.bsm.dla.mil/RFP/. Hard copies of the solicitation and any applicable drawings (if available) can be downloaded at this website. Purchase request number: 7007002211, NSN: 5930-01-452-9533, Nomenclature: Switch, Reed. Items are to be IAW: IAW BASIC DRAWING NR 53711 6557926 REVISION NR C DTD 05/25/2001 PART PIECE NUMBER: 6557926 IAW REFERENCE DRAWING NR 53711 6557942 REVISION NR B DTD 05/29/1998 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 53711 6510875 REVISION NR C DTD 12/03/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 53711 6557925 REVISION NR C DTD 05/25/2001 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 53711 6557924 REVISION NR E DTD 12/08/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 53711 6557926 REVISION NR D DTD 12/17/2004 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 53711 6557940 REVISION NR E DTD 12/03/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 53711 6557944 REVISION NR F DTD 01/22/2016 PART PIECE NUMBER: IAW REFERENCE QAP 16236 SQAP014529533 REVISION NR DTD 05/21/2020 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 53711 6557936 REVISION NR C DTD 12/08/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 53711 6557925 REVISION NR D DTD 06/16/2004 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 16236 EI-6557940 REVISION NR DTD 09/08/2022 PART PIECE NUMBER: Contractor First Article Testing Applies. First Article Testing Applies to all non-waived, non-approved sources. Currently waived sources for FAT are: Ametek SCP, Inc. (0DNZ3) and Powertronic Systems Florida (6ZMJ9). Full and Open Competition applies. The solicitation will be posted on or around 11/12/2024 via our website, https://www.dibbs.bsm.dla.mil/RFP/. Total quantity of the PR is for 423 units, with all 423 units being shipped to New Cumberland, PA. FEDERAL, MILITARY AND COMMERCIAL SPECIFICATIONS CANNOT BE PROVIDED BY DSCC. Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies and services. However, interested persons may identify to the contracting officer their interests and capability to satisfy the Government’s requirement with a commercial item within 15 days of this notice. All responsible sources may submit an offer/quote which shall be considered. For any questions about this, please contact the buyer by e-mail at: brian.maxwell@dla.mil

Inactive Total Small Business Set-Aside (FAR 19.5)

Please review the NSN/item below and provide us with any sources that are able to manufacture the item. Please also provide the location of the manufacturer (City and state OR Country as applicable). ... Please review the NSN/item below and provide us with any sources that are able to manufacture the item. Please also provide the location of the manufacturer (City and state OR Country as applicable). Please also provide POCs for these manufacturers if available. Please submit this information to Brian Maxwell at brian.maxwell@dla.mil Telephone: (614) 692-1067. Thank you in advance for your assistance. NSN: 5930-01-452-9533, Switch, Reed. This item is being procured in accordance with the drawings listed below: IAW BASIC DRAWING NR 53711 6557926 REVISION NR C DTD 05/25/2001 PART PIECE NUMBER: 6557926 IAW REFERENCE DRAWING NR 53711 6557942 REVISION NR B DTD 05/29/1998 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 53711 6510875 REVISION NR C DTD 12/03/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 53711 6557925 REVISION NR C DTD 05/25/2001 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 53711 6557924 REVISION NR E DTD 12/08/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 53711 6557926 REVISION NR D DTD 12/17/2004 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 53711 6557940 REVISION NR E DTD 12/03/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 53711 6557944 REVISION NR F DTD 01/22/2016 PART PIECE NUMBER: IAW REFERENCE QAP 16236 SQAP014529533 REVISION NR DTD 05/21/2020 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 53711 6557936 REVISION NR C DTD 12/08/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 53711 6557925 REVISION NR D DTD 06/16/2004 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 16236 EI-6557940 REVISION NR DTD 09/08/2022 PART PIECE NUMBER: ********************************************************* CONTRACTOR FIRST ARTICLE TEST IS REQUIRED Contractor First Article Testing Applies. First Article Testing Applies to all non-waived, non-approved sources. Currently waived sources for FAT are: Ametek SCP, Inc. (0DNZ3) and Powertronic Systems Florida (6ZMJ9). Any available drawings can be accessed along with the solicitation once it is issued. This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data. The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at: https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/ To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data. BID SET AVAILABLE. FULL AND OPEN COMPETITION APPLIES. CRITICAL APPLICATION ITEM THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML REQUIREMENTS. BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE QPL(S)/QML(S).