Inactive Total Small Business Set-Aside (FAR 19.5)

The response date referenced is estimated. Issue date is on or around 6/24/2024, with the Response date on or around 7/26/2024. Note: Copies of this solicitation will only be available via the World W... The response date referenced is estimated. Issue date is on or around 6/24/2024, with the Response date on or around 7/26/2024. Note: Copies of this solicitation will only be available via the World Wide Web approximately 15 days after this notice is published (solicitation should be posted on or around 6/24/2024). The DSCC Website address (URL) is https://www.dibbs.bsm.dla.mil/RFP/. Hard copies of the solicitation and any applicable drawings (if available) can be downloaded at this website. Purchase request number: 7005800712, NSN: 5930-01-601-8490, Nomenclature: Switch Assembly. Items are to be IAW: IAW BASIC DRAWING NR 53711 7068652 REVISION NR B DTD 02/15/1999 PART PIECE NUMBER: 808-7068652-A33 IAW REFERENCE DRAWING NR 53711 7068652 REVISION NR B DTD 01/22/2009 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 53711 7106241 REVISION NR C DTD 11/20/1998 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 53711 7106241 REVISION NR C DTD 08/10/2007 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 53711 7106241 REVISION NR C DTD 01/19/2010 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 53711 7106241 REVISION NR C DTD 08/18/2021 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 53711 7068652 REVISION NR B DTD 08/25/2009 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 53711 7068652 REVISION NR B DTD 04/29/2013 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 53711 7068652 REVISION NR B DTD 04/16/2021 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 53711 7068652 REVISION NR B DTD 10/16/2009 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 53711 7068652 REVISION NR A DTD 10/09/2013 PART PIECE NUMBER: No First Article Test, special testing or deviations from the controlling document required. Full and Open Competition applies. The solicitation will be posted on or around 6/24/2024 via our website, https://www.dibbs.bsm.dla.mil/RFP/. Total quantity of the PR is for 98 units, with all 98 units being shipped to New Cumberland, PA. FEDERAL, MILITARY AND COMMERCIAL SPECIFICATIONS CANNOT BE PROVIDED BY DSCC. Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies and services. However, interested persons may identify to the contracting officer their interests and capability to satisfy the Government’s requirement with a commercial item within 15 days of this notice. All responsible sources may submit an offer/quote which shall be considered. For any questions about this, please contact the buyer by e-mail at: brian.maxwell@dla.mil

Inactive Total Small Business Set-Aside (FAR 19.5)

Please review the NSN/item below and provide us with any sources that are able to manufacture the item. Please also provide the location of the manufacturer (City and state OR Country as applicable). ... Please review the NSN/item below and provide us with any sources that are able to manufacture the item. Please also provide the location of the manufacturer (City and state OR Country as applicable). Please also provide POCs for these manufacturers if available. Please submit this information to Brian Maxwell at brian.maxwell@dla.mil Telephone: (614) 692-1067. Thank you in advance for your assistance. NSN: 5930-01-601-8490, Switch Assembly. This item is being procured in accordance with the drawings listed below: IAW BASIC DRAWING NR 53711 7068652 REVISION NR B DTD 02/15/1999 PART PIECE NUMBER: 808-7068652-A33 IAW REFERENCE DRAWING NR 53711 7068652 REVISION NR B DTD 01/22/2009 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 53711 7106241 REVISION NR C DTD 11/20/1998 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 53711 7106241 REVISION NR C DTD 08/10/2007 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 53711 7106241 REVISION NR C DTD 01/19/2010 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 53711 7106241 REVISION NR C DTD 08/18/2021 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 53711 7068652 REVISION NR B DTD 08/25/2009 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 53711 7068652 REVISION NR B DTD 04/29/2013 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 53711 7068652 REVISION NR B DTD 04/16/2021 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 53711 7068652 REVISION NR B DTD 10/16/2009 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 53711 7068652 REVISION NR A DTD 10/09/2013 PART PIECE NUMBER: This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data. The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at: https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/ To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data. THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT BID SET AVAILABLE. FULL AND OPEN COMPETITION APPLIES. NO FIRST ARTICLE TEST, SPECIAL TESTING OR DEVIATIONS FROM THE CONTROLLING DOCUMENT REQUIRED. NOTE: This project contains Drawings/Specifications. Vendors may access the applicable drawings/specifications by querying SPE7M824R0012MR within the solicitation field at the following link: https://pcf1.bsm.dla.mil/cfolders. Drawings cannot be accessed through a DIBBS, cFolders link at this time.