Inactive

The response date referenced is estimated. Issue date is on or around 3/2/2021, with the Response date on or around 4/2/2021. Note: Copies of this solicitation will only be available via the World Wid... The response date referenced is estimated. Issue date is on or around 3/2/2021, with the Response date on or around 4/2/2021. Note: Copies of this solicitation will only be available via the World Wide Web approximately 15 days after this notice is published (solicitation should be posted on or around 3/2/2021). The DSCC Website address (URL) is https://www.dibbs.bsm.dla.mil/RFP/. Hard copies of the solicitation and any applicable drawings (if available) can be downloaded at this website. Purchase request number: 1000094728, NSN: 6105-01-211-6510, Nomenclature: Motor, Alternating Current. Approved Sources/Part Numbers: Howden North America Inc. (75477) part number 525079-1 This acquisition is for supplies for which the Government does not possess complete, unrestrictive technical data; therefore, the Government intends to solicit and contract with only approved sources under the authority of 10 U.S.C. 2304(c)(1). NOTE: THIS IS A RESTRICTED SOURCE ITEM AND REQUIRES ENGINEERING SOURCE APPROVAL BY THE GOVERNMENT DESIGN CONTROL ACTIVITY. ALTERNATE OFFEROR REQUIREMENTS: THE FOLLOWING DOCUMENTATION IS REQUIRED IN ACCORDANCE WITH MIL-T-31000. (A) ALL DRAWINGS AND SPECIFICATIONS REQUIRED FOR MANUFACTURE. (B) PROCESS/OPERATION SHEETS WHICH DESCRIBE IN DETAIL EACH CRITICAL PROCESS AND ASSOCIATED INSPECTION/ACCEPTANCE CRITERIA. (C) IDENTIFICATION OF SOURCES WHO WILL PERFORM CRITICAL PROCESSES/OPERATIONS, INCLUDING SOURCES OF FORGINGS AND CASTINGS. (D) IF AVAILABLE COPIES OF PURCHASE ORDERS FROM THE ITEM. (E) A SHOCK EXTENSION REPORT IN ACCORDANCE WITH MIL-S-901 AND IN A FORMAT AS SPECIFIED IN DI-ENVR-80706 IS REQUIRED. IF THE OEM'S DETAILED DRAWINGS ARE NOT AVAILABLE, THE OFFEROR MUST SUPPLY AN ENGINEERING ANALYSIS REPORT WHICH DETAILS HOW THEIR DRAWINGS WERE DEVELOPED. ADDITIONALLY, IF REVERSE ENGINEERING WAS USED, THE COMPLETE PROCEDURE WILL BE REPORTED INCLUDING: NUMBER OF SAMPLES, METHODS AND MEASURES USED, ALL DATA COMPILED, RATIONALE FOR DIMENSION TOLERANCE DEVIATION, AND RATIONALE FOR ACCEPTANCE. THIS DATA WILL BE FORWARDED TO THE ENGINEERING SUPPORT ACTIVITY FOR EVALUATION. The solicitation will be posted on or around 3/2/2021 via our website, https://www.dibbs.bsm.dla.mil/RFP/. An Indefinite Quantity Long-Term Contract for three base years with two one year option years is anticipated. The total duration base plus option years shall not exceed 5 years. Quantity increments and delivery schedule will be stated on the RFP. FEDERAL, MILITARY AND COMMERCIAL SPECIFICATIONS CANNOT BE PROVIDED BY DSCC. Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies and services. However, interested persons may identify to the contracting officer their interests and capability to satisfy the Government’s requirement with a commercial item within 15 days of this notice. All responsible sources may submit an offer/quote which shall be considered. For any questions about this, please contact the buyer by e-mail at: brian.maxwell@dla.mil

Inactive

Please review the NSN/item below and provide us with any sources that are able to manufacture the item. Please also provide the location of the manufacturer (City and state OR Country as applicable). ... Please review the NSN/item below and provide us with any sources that are able to manufacture the item. Please also provide the location of the manufacturer (City and state OR Country as applicable). Please also provide POCs for these manufacturers if available. Please submit this information to Brian Maxwell at brian.maxwell@dla.mil Telephone: (614) 692-1067. Thank you in advance for your assistance. NSN: 6105-01-211-6510, Motor, Alternating Current. This item is being procured in accordance with the part numbers listed below: Howden North America (75477) P/N 525079-1 Should a company wish to be reviewed and qualified as an "Approved Source", they may submit an application package through the DLA Land and Maritime Alternate Offer / Source Approval Request (SAR) Program. A SAR package contains all technical data needed to demonstrate that the prospective contractor can competently manufacture the product to the same level of quality or better than the Original Equipment Manufacturer (OEM). The onus is on the contractor to document and demonstrate their product is equal to, or better, than the currently approved item which DLA Land and Maritime is procuring. Offerors should complete and submit their Alternate Offer (with SAR package) to the Contracting Officer listed in the Solicitation. For further information, please reference the DLA Land and Maritime web page at: http://www.dla.mil/LandandMaritime/Business/Selling/AlternateOffers.aspx Click on the highlight Alternate Offer/Source Approval Program for a detailed explanation for the information and format necessary for a SAR and for the SAR approval process. Offers not cited as an approved source are required to obtain source approval prior to award. The contractor must submit a Source Approval Request (SAR) PKG to DLA for evaluation. All required information must be provided. Any available drawings can be accessed along with the solicitation once it is issued. ALTERNATE OFFEROR REQUIREMENTS: THE FOLLOWING DOCUMENTATION IS REQUIRED IN ACCORDANCE WITH MIL-T-31000. (A) ALL DRAWINGS AND SPECIFICATIONS REQUIRED FOR MANUFACTURE. (B) PROCESS/OPERATION SHEETS WHICH DESCRIBE IN DETAIL EACH CRITICAL PROCESS AND ASSOCIATED INSPECTION/ACCEPTANCE CRITERIA. (C) IDENTIFICATION OF SOURCES WHO WILL PERFORM CRITICAL PROCESSES/OPERATIONS, INCLUDING SOURCES OF FORGINGS AND CASTINGS. (D) IF AVAILABLE COPIES OF PURCHASE ORDERS FROM THE ITEM. (E) A SHOCK EXTENSION REPORT IN ACCORDANCE WITH MIL-S-901 AND IN A FORMAT AS SPECIFIED IN DI-ENVR-80706 IS REQUIRED. IF THE OEM'S DETAILED DRAWINGS ARE NOT AVAILABLE, THE OFFEROR MUST SUPPLY AN ENGINEERING ANALYSIS REPORT WHICH DETAILS HOW THEIR DRAWINGS WERE DEVELOPED. ADDITIONALLY, IF REVERSE ENGINEERING WAS USED, THE COMPLETE PROCEDURE WILL BE REPORTED INCLUDING: NUMBER OF SAMPLES, METHODS AND MEASURES USED, ALL DATA COMPILED, RATIONALE FOR DIMENSION TOLERANCE DEVIATION, AND RATIONALE FOR ACCEPTANCE. THIS DATA WILL BE FORWARDED TO THE ENGINEERING SUPPORT ACTIVITY FOR EVALUATION. THIS MOTOR SHALL BE FURNISHED IAW MIL-M-17059 REV A WITH SEALED INSULATION.