Inactive Total Small Business Set-Aside (FAR 19.5)

Sources sought is amended to change the return date to 4/12/21 Description is below: PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION AND PACKAGING REFERENCE NUMBER... Sources sought is amended to change the return date to 4/12/21 Description is below: PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN. NSN:016408931 POST,AIMING REFERENCE NUMBER:RP001 REFERENCE NUMBER:RQ032 REFERENCE NUMBER:RD002 REFERENCE NUMBER:RA001 REFERENCE NUMBER:RQ011 REFERENCE NUMBER:CA070 REFERENCE NUMBER:RQ009 REFERENCE NUMBER:ZD054 REFERENCE NUMBER:ZDISO IAW BASIC DRAWING NR 19200 13028470 REVISION NR B DTD 08/13/2018 PART PIECE NUMBER: 13028470-2 IAW REFERENCE DRAWING NR 19207 12579607 REVISION NR C DTD 08/04/2009 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13028468 REVISION NR B DTD 08/13/2018 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13028469 REVISION NR A DTD 08/12/2014 PART PIECE NUMBER: IAW REFERENCE QAP 19200 13028469 REVISION NR DTD 03/06/2014 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13028470 REVISION NR B DTD 04/07/2020 PART PIECE NUMBER: IAW REFERENCE QAP 19200 13028470 REVISION NR B DTD 03/06/2014 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13028471 REVISION NR DTD 08/07/2013 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13028472 REVISION NR DTD 08/07/2013 PART PIECE NUMBER: IAW REFERENCE QAP 19200 13028472 REVISION NR DTD 03/06/2014 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13028468 REVISION NR A DTD 06/28/2018 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13028470 REVISION NR A DTD 06/28/2018 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13028470 REVISION NR A DTD 06/28/2018 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13028470-2 REVISION NR A DTD 08/12/2014 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13028470 REVISION NR DTD 04/06/2020 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13028470 REVISION NR DTD 04/06/2020 PART PIECE NUMBER: PREP FOR DELIVERY LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS PKGING DATA-QUP:001 WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951. ************************************************************************************************************ GLOSSARY ************************************************************************************************************ PACKAGING TEXT THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT: All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT ITEM DESCRIPTION TEXT REFERENCE NUMBER RP001 RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT REFERENCE NUMBER RQ032 RQ032: EXPORT CONTROL OF TECHNICAL DATA This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data. The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at: https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/ To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data. REFERENCE NUMBER RD002 RD002, COVERED DEFENSE INFORMATION APPLIES REFERENCE NUMBER RA001 RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. REFERENCE NUMBER RQ011 RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES REFERENCE NUMBER CA070 FULL AND OPEN COMPETITION APPLY REFERENCE NUMBER RQ009 RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN REFERENCE NUMBER ZD054 CERTIFICATE OF CONFORMANCE PROCEDURES (FAR 52.246-15) ARE AUTHORIZED, UNLESS WITHELD BY A QUALITY ASSURANCE LETTER OF INSTRUCTION. REFERENCE NUMBER ZDISO FAR CLAUSE 52.246-11 APPLIES. THE CONTRACTOR SHALL BE IN COMPLIANCE WITH THE FULL REQUIREMENTS OF THE INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO) 9001 STANDARD AT THE TIME OF CONTRACT ACCEPTANCE OR CONTRACT MODIFICATION DATE. 1. The minimum Higher Level Contract Quality Requirements for manufacturers for DLA ISO 9001:2015. MIL-I-45208 and MIL-Q-9858 are obsolete and no longer acceptable when higher level quality is required. 2. Higher-Level Contract Quality Requirement for Non-Manufacturers. If a non-manufacturer is supplying the material, the non-manufacturer shall: (i) Furnish items produced at a manufacturing facility conforming to the higher-level contract quality requirement for manufacturers as specified in paragraph 1; and (ii) Maintain and provide documented evidence that material furnished under this contract was produced at a manufacturing facility conforming to the specified higher-level contract quality requirement and that the material meets all requirements. At a minimum, the documented evidence shall be sufficient to establish the identity of the product and its manufacturing source; and include the basic item description, the item(s) part number and/or national stock number, the item(s) manufacturing source , the manufacturing source#s commercial and government entity code (e.g. CAGE code), and clear identification of the name and location of supply chain intermediaries from the manufacturer to the direct source of the product for the offeror/contractor, to the item(s) acceptance by the Government. It should also include, where available, the manufacturer's batch identification for the part(s), such as date codes, lot codes, or serial numbers. (iii) Maintain documentation of the Non-Manufacturers# quality assurance program; receiving/verification processes; records management system; procurement system; inventory control system; testing results; and any other records associated with the material being provided. (End of TQ Requirement)