Inactive

This synopsis for an upcoming solicitation is being issued to establish an Indefinite Quantity Contract (IQC) that will provide stock replenishment coverage in support of military depots. The NSN spec... This synopsis for an upcoming solicitation is being issued to establish an Indefinite Quantity Contract (IQC) that will provide stock replenishment coverage in support of military depots. The NSN specified in Section B of the solicitation are Other Than Full and Open Competition. Section B includes 1 NSN with two (2) approved sources of supply. The following is the NSN data: NSN 4820014867573 VALVE, PLUG - Approved sources of supply and Part Number - Montreal Bronze, Ltd. (CAGE 38881)/ Part Number M24509-40-I-L-B; Cunico Corporation (CAGE 53424)/ Part Numbers—CFV-19609-002 ITEM 002 & FRP-2-4IN CFV-19608-002. Annual Demand Quantity 98. Additional NSN data: Unit of Issue is each, FOB is Origin, Inspection and Acceptance is Destination. The solicitation will be available on DLA's Internet Bid Board Site (https://www.dibbs.bsm.dla.mil/RFP/) on or about 7/15/2021. All offers shall be in the English language and in US dollars. All responsible sources may submit an offer which shall be considered. The total duration of the procurement shall not exceed 5 years. This proposed procurement includes items within the Federal Supply Class/FSC 4820. While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance, surge and sustainment and other evaluation factors as described in the solicitation. Based upon market research, the Government is using the policies contained in Part 15, Contracting by Negotiation, in its solicitation for the described supplies or services. TYPE OF SET-ASIDE: N/A Product Information Data (PID): *** LTC PID Packaging Consolidated Text *** -PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN. NSN:015502960 VALVE, GATE. REFERENCE NUMBER:RP001 REFERENCE NUMBER:ZD003 REFERENCE NUMBER:RQ032 REFERENCE NUMBER:RA001 REFERENCE NUMBER:RQ001 REFERENCE NUMBER:RQ002 REFERENCE NUMBER:RQ009 REFERENCE NUMBER:RQ011 REFERENCE NUMBER:ZD080 REFERENCE NUMBER:ZD025 12.000 INCH, WEAR COATED, DRILLED WITHOUT SEALING COMPOUND. AN IDENTIFICATION PLATE SHALL BE SECURELY ATTACHED TO EACH VALVE SHOWING CID 88A090068 REFERENCE NUMBER:ZD032 REFERENCE NUMBER:CS187 REFERENCE NUMBER:CS118 CRITICAL APPLICATION ITEM IAW BASIC DRAWING NR 80064 2177917 REVISION NR M DTD 04/18/2018 PART PIECE NUMBER: 803-2177917-12AAF IAW REFERENCE DRAWING NR 80064 1385620 REVISION NR L DTD 04/26/2010 PART PIECE NUMBER: PREP FOR DELIVERY LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP:001 PRES MTHD:AE CLNG/DRY:1 PRESV MAT:00 WRAP MAT:ZZ CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:C UNIT CONT:FO OPI:O PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT ************************************************************************************************************ GLOSSARY ************************************************************************************************************ PACKAGING TEXT THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT: ITEM DESCRIPTION TEXT REFERENCE NUMBER RP001 RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT REFERENCE NUMBER ZD003 A metal casting process was identified as a means to manufacture this item. Tooling is required to produce a casting. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C&E Supply Chains) DSCR.AFCAT@dla.mil; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil REFERENCE NUMBER RQ032 RQ032: EXPORT CONTROL OF TECHNICAL DATA This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data. The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at: https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/ To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data. REFERENCE NUMBER RA001 RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. REFERENCE NUMBER RQ001 RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS) REFERENCE NUMBER RQ002 RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER) REFERENCE NUMBER RQ009 RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN REFERENCE NUMBER RQ011 RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES REFERENCE NUMBER ZD080 SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. REFERENCE NUMBER ZD025 MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D). REFERENCE NUMBER ZD032 Contractor shall enclose a signed hydrostatic test report with each valve supplied under contract. This information can be placed in each box or affixed to each box as a label. Information contained on the label/report shall certify that Hydrostatic testing has been performed and successfully met the requirements of the drawing or specification sited in the contract. REFERENCE NUMBER CS187 CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS. REFERENCE NUMBER CS118 FULL AND OPEN COMPETITION APPLIES.