Inactive

The Defense Logistics Agency (DLA) Land and Maritime, Columbus will be issuing a solicitation comprised of two (2) NSNs that are source controlled drawing items. Solicitation will be a five-year, Firm... The Defense Logistics Agency (DLA) Land and Maritime, Columbus will be issuing a solicitation comprised of two (2) NSNs that are source controlled drawing items. Solicitation will be a five-year, Firm-Fixed-Price, Indefinite Delivery Contract (IDC). The five-year period is inclusive of a three-year base period and two separately priced one-year option periods. First Destination Transportation (FDT) applies to these items. This solicitation is being issued as unrestricted, with Other Than Full and Open Competition. This solicitation will use procedures from FAR Part 13.5. The maximum contract value will be $3,177,668.28. Solicitation will be available on DIBBS on or about May 14, 2025, for 15 days. The required items being procured will be under Section B Schedule of Supplies on the solicitation. Search the solicitation using the DIBBS RFP/IFB/Other RFQs database search and then click the Red "Offer" button on the search results screen (Note: users must be logged in to DIBBS to submit their quote through DIBBS). For additional guidance, refer to https://www.dibbs.bsm.dla.mil/refs/help/Solicitations/DIBBS-Upload-Offer-User-Help.pdf Solicitation NAICS: 332510 - Hardware Manufacturing Size Standard = 750. Description & Estimated Annual Demand Quantity (ADQ): CLIN 0001 / 2540013763998 / HANDLE, DOOR VEHICULAR, ADQ 996 CLIN 0002 / 2540013763999 / HANDLE, DOOR VEHICULAR, ADQ 893 AMC/AMSC = 1/B. Drawing/Specification: See the listed PID The NSNs are included in DLA’s First Destination Transportation (FDT) requiring FOB Origin freight terms. The required packaging is Military Packaging I/A/W MIL-STD-2073-1E and MIL-STD-129 marking. Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. Note: THE CITED DRAWINGS ARE SOURCE CONTROLLED DRAWINGS AND AS OF THE DATE ONLY THE SOURCE(S) CITED ON THE DRAWINGS HAVE BEEN APPROVED. EVEN THOUGH SOURCES AND APPROVED PART NUMBERS ARE PROVIDED, THE ITEMS FURNISHED MUST MEET THE REQUIREMENTS OF THE CITED DRAWINGS. DOOR LOCK INSTALLATION SHALL MEET THE REQUIREMENTS OF "DOOR LOCKS AND DOOR RETENTION COMPONENTS" IAW FEDERAL MOTOR VEHICLE SAFETY STANDARD (FMVSS) 206 Quality Control Codes (QCC): 2540013763998 - QBA. Tailored Higher Level Contract Quality - First Article Testing Contractor, Product Verification Testing (PVT), Inspection / Acceptance Origin. 2540013763999 – DAA. Standard inspection. Inspection / Acceptance Destination. Technical/Quality Requirements - The offerors will be required to comply with all the technical and quality requirements associated with this NSN. Offerors shall ensure that items supplied are in accordance with all quality and technical requirements found in the Procurement Item Description (PID), which will be provided with the RFQ. All of the shipments will be for stock. The appropriate clauses and/or provisions will be included in the solicitation. Some items have technical data involving Higher Level Contract Quality, Non-Tailored Higher Level Contract Quality, COVERED DEFENSE, Configuration Change Management. The NSNs have technical data, some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR) and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data. The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at: https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/

Inactive

DLA Land and Maritime plans to issue a solicitation for two (2) National Stock Numbers (NSN), that are drawing (Source Controlled) items. Solicitation will be a five-year, Firm-Fixed-Price, Indefinite... DLA Land and Maritime plans to issue a solicitation for two (2) National Stock Numbers (NSN), that are drawing (Source Controlled) items. Solicitation will be a five-year, Firm-Fixed-Price, Indefinite Delivery Contract (IDC). The five-year period is inclusive of a three-year base period and two separately priced one-year option periods. First Destination Transportation (FDT) applies to both items. The maximum contract value will be $3,177,668.28. Solicitation will be available on DIBBS on or about APRIL 22, 2025. The purpose of this notice is to identify qualified vendors capable of manufacturing items in accordance with the requirements listed below. Please review the below NSNs and provide us with any additional sources that are able to manufacture these items. CLIN / NSN / Description: CLIN 0001 / 2540013763998 / HANDLE, DOOR VEHICULAR CLIN 0002 / 2540013763999 / HANDLE, DOOR VEHICULAR ESTIMATED ANNUAL DEMAND QUANTITY (ADQ) = 566 (2540013763998), 534 (2540013763999) Other Tech Data: 2540013763998: AMC/AMSC = 1/B, Place of Inspection/Acceptance = 1, Origin, QCC = QBA 2540013763999: AMC/AMSC = 1/B, Place of Inspection/Acceptance = 2, Destination, QCC = DAA Note: THE CITED DRAWINGS ARE SOURCE CONTROLLED DRAWINGS AND AS OF THE DATE ONLY THE SOURCE(S) CITED ON THE DRAWINGS HAVE BEEN APPROVED. EVEN THOUGH SOURCES AND APPROVED PART NUMBERS ARE PROVIDED, THE ITEMS FURNISHED MUST MEET THE REQUIREMENTS OF THE CITED DRAWINGS. This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR) and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data. Product Item Description (PID) *** LTC PID Packaging Consolidated Text *** PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN. NSN: 2540-01-376-3998 (CLIN 0001) HANDLE, DOOR. WITHOUT KEYS REFERENCE NUMBER:RA001 REFERENCE NUMBER:RD003 REFERENCE NUMBER:RP001 REFERENCE NUMBER:RQ001 REFERENCE NUMBER:RQ002 REFERENCE NUMBER:RQ011 REFERENCE NUMBER:CS120 DOOR LOCK INSTALLATION SHALL MEET THE REQUIREMENTS OF "DOOR LOCKS AND DOOR RETENTION COMPONENTS" IAW FEDERAL MOTOR VEHICLE SAFETY STANDARD (FMVSS) 206 . ENGINEERING EXCEPTION TO DRAWING 19207_12417493: ZONE D7 CAGE CODE 0FW39 changed to 076M6 . REFERENCE NUMBER:ZD074 CRITICAL APPLICATION ITEM BAE SYSTEMS LAND & ARMAMENTS L.P. 076M6 P/N 81.62641-6103 RHEINMETALL MAN MILITARY VEHICLES DRMV2 P/N 81.62641-6103 INDUTEC VERTRIEB TECHNISCHER 6130N P/N 81.62641-6103 IAW BASIC DRAWING NR 19207 12417493 REVISION NR E DTD 11/15/2024 PART PIECE NUMBER: 12417493-002 IAW REFERENCE DRAWING NR 19207 12378607 REVISION NR D DTD 02/04/2013 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12417493-002 REVISION NR DTD 03/10/2025 PART PIECE NUMBER: IAW REFERENCE QAP 13873 CDRL-COQC-22104 REVISION NR DTD 04/08/2022 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12417493-002 REVISION NR E DTD 11/15/2024 PART PIECE NUMBER: PREP FOR DELIVERY LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS PKGING DATA - MIL-STD-2073-1E QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B UNIT CONT:BV OPI:O INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT NSN: 2940-01-376-3999 (CLIN 0002) HANDLE, DOOR. WITHOUT KEYS REFERENCE NUMBER:RA001 REFERENCE NUMBER:RP001 REFERENCE NUMBER:RQ002 REFERENCE NUMBER:RQ011 REFERENCE NUMBER:CS120 ENGINEERING EXCEPTION TO DRAWING 19207_12417493: ZONE D7 CHANGE Approved Source(s) of Supply FROM: STEYR (S7622) P/N 115280340007 BAE (0FW39) P/N 12417493-001 TO: RHEINMETALL (DRMV2) P/N 81.62641-6103 BAE (076M6) P/N 81.62641-6103 . REFERENCE NUMBER:ZD074 CRITICAL APPLICATION ITEM BAE SYSTEMS LAND & ARMAMENTS L.P. 076M6 P/N 81.62641-6104 RHEINMETALL MAN MILITARY VEHICLES DRMV2 P/N 81.62641-6104 INDUTEC VERTRIEB TECHNISCHER 6130N P/N 81.62641-6104 IAW BASIC DRAWING NR 19207 12417493 REVISION NR E DTD 11/15/2024 PART PIECE NUMBER: 12417493-001 IAW REFERENCE DRAWING NR 19207 12378607 REVISION NR D DTD 02/04/2013 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12417493-001 REVISION NR DTD 08/11/2022 PART PIECE NUMBER: PREP FOR DELIVERY LINE ITEM 00002 TYPE OF COVERAGE: DLA DIRECT, CONUS PKGING DATA - MIL-STD-2073-1E QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B UNIT CONT:D3 OPI:O INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT **************************************************************************************** GLOSSARY **************************************************************************************** PACKAGING TEXT THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT: ITEM DESCRIPTION TEXT REFERENCE NUMBER RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. REFERENCE NUMBER RD003: COVERED DEFENSE INFORMATION POTENTIALLY APPLIES REFERENCE NUMBER RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT REFERENCE NUMBER RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS) REFERENCE NUMBER RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER) REFERENCE NUMBER RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES REFERENCE NUMBER CS120 NOTE: THE CITED DRAWING IS A SOURCE CONTROLLED DRAWING AND AS OF THE DATE OF THIS SOLICITATION ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE BEEN APPROVED. EVEN THOUGH SOURCES AND APPROVED PART NUMBERS ARE PROVIDED, THE ITEMS FURNISHED MUST MEET THE REQUIREMENTS OF THE CITED DRAWING. OFFERORS WHO ARE INTERESTED IN QUALIFYING THEIR PRODUCT FOR PURPOSE OF FUTURE ACQUISITION MUST CONTACT THE COGNIZANT DESIGN ACTIVITY SPECIFIED ON THE SOURCE CONTROLLED DRAWING. ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT THIS TIME. REFERENCE NUMBER ZD074: THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM - (TO INCLUDE 'COMMERCIAL OF A TYPE')