Inactive

NSN(s): 2540-01-523-2762 Item Description: SEE RFQ Manufacturer’s Code and Part Number (if applicable): N/A Drawing Number (if applicable): SEE RFQ Specification Number (if applicable): N/A Qualificat... NSN(s): 2540-01-523-2762 Item Description: SEE RFQ Manufacturer’s Code and Part Number (if applicable): N/A Drawing Number (if applicable): SEE RFQ Specification Number (if applicable): N/A Qualification Requirements (e.g. QPL) and where information on qualification requirements may be obtained. (if applicable): N/A Quantity (including option quantity) : Anticipated type of contract is an IDC. Items to be shipped to various military depot locations within established minimum & maximum quantity limits on an as needed basis. Unit of Issue: EA Destination Information: FOB ORIGIN – STOCK ONLY Delivery Schedule: SEE RFQ **This acquisition is being conducted under FAR Part 13.5, Test Program for Certain Commercial Items. ** This acquisition involves a consolidation of requirements IAW FAR 7.107-2 and has been determined necessary and justified. The determination will be posted with the solicitation IAW 7.107-5(c). One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the United States by the Trade Agreements Act of 1979. All offers shall be in the English language and in U.S. dollars. All interested suppliers may submit an offer. All responsible sources may submit an offer/quote which shall be considered. --- ( x ) The solicitation will be available on DLA’s Internet Bid Board Site (https://www.dibbs.bsm.dla.mil/RFP/) on or about 08/25/2023. ( x ) The Small Business size standard is _750_ employees. ( x ) The proposed procurement contains an option to extend the contract period one or more times at the discretion of the government. The total duration (base plus option years) shall not exceed 3 years. (x ) While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation. TYPE OF SET-ASIDE: UNRESTRICTED

Inactive

NO SOLICITATION IS BEING ISSUED AT THIS TIME. ***Sources Sought*** This is not a request for either a quote or proposal. This announcement is considered market research in accordance with FAR Part 10.... NO SOLICITATION IS BEING ISSUED AT THIS TIME. ***Sources Sought*** This is not a request for either a quote or proposal. This announcement is considered market research in accordance with FAR Part 10. NO SOLICITATION IS BEING ISSUED AT THIS TIME. The purpose of this synopsis is to identify qualified vendors capable of manufacturing items in accordance with the requirements listed below. Please review the below NSNs and provide us with any additional sources that can manufacture these items. Please provide the company name, city and state OR country if applicable, and POCs with telephone, fax and/or email information. All this information can be submitted to Scott Knowles at Scott.Knowles@dla.mil. Phone 614 692-0639. We thank you in advance for your assistance. NSN NAME 2540-01-523-2762 HANDLE, VEHICULAR DOOR, INSIDE - LH ASSEMBLY HANDLE, VEHICULAR DOOR, INSIDE - LH ASSEMBLY RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RD003: COVERED DEFENSE INFORMATION POTENTIALLY APPLIES RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS) RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER) RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED MANUFACTURERS LIST (QML)" APPLY. CERTIFICATE OF CONFORMANCE REQUIRED CS187: CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS. ZD080: SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. IAW BASIC DRAWING NR 19207 12423360 REVISION NR DTD 07/14/2003 PART PIECE NUMBER: 12423360-001 IAW REFERENCE DRAWING NR 19207 12420325 REVISION NR K DTD 07/09/2020 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12423360-001 REVISION NR DTD 01/19/2023 PART PIECE NUMBER: PREP FOR DELIVERY PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00 WRAP MAT:FA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B UNIT CONT:00 OPI:M INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT --------------------------------------------------------------- Responses to this Request for Information (RFI) are not considered offers and cannot be accepted by the Government to form a binding contract. This RFI is for market research purposes only. Any information submitted is at the company's own expense. The Government will not reimburse respondents for any costs associated with submission of capability statements in connection with the market survey. Any information provided is voluntary. NO SOLICITATION IS BEING ISSUED AT THIS TIME.