Inactive Total Small Business Set-Aside (FAR 19.5)

NSN(s): 2510-01-521-2739, 2510-01-521-8018 and 2510-01-582-5403 Item Description: SEE RFQ Manufacturer’s Code and Part Number (if applicable): N/A Drawing Number (if applicable): SEE RFQ Specification... NSN(s): 2510-01-521-2739, 2510-01-521-8018 and 2510-01-582-5403 Item Description: SEE RFQ Manufacturer’s Code and Part Number (if applicable): N/A Drawing Number (if applicable): SEE RFQ Specification Number (if applicable): N/A Qualification Requirements (e.g. QPL) and where information on qualification requirements may be obtained. (if applicable): N/A Quantity (including option quantity) : Anticipated type of contract is an IDC. Items to be shipped to various military depot locations within established minimum & maximum quantity limits on an as needed basis. Unit of Issue: EA Destination Information: FOB ORIGIN – STOCK ONLY Delivery Schedule: SEE RFQ **This acquisition is being conducted under FAR Part 13.5, Test Program for Certain Commercial Items. ** This acquisition involves a consolidation of requirements IAW FAR 7.107-2 and has been determined necessary and justified. The determination will be posted with the solicitation IAW 7.107-5(c). One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the United States by the Trade Agreements Act of 1979. All offers shall be in the English language and in U.S. dollars. All interested suppliers may submit an offer. All responsible sources may submit an offer/quote which shall be considered. --- ( x ) The solicitation will be available on DLA’s Internet Bid Board Site (https://www.dibbs.bsm.dla.mil/RFP/) on or about 05/112023. ( x ) The Small Business size standard is _1000_ employees. ( x ) Specifications, plans or drawings are not available. ( x ) The proposed procurement contains an option to extend the contract period one or more times at the discretion of the government. The total duration (base plus option years) shall not exceed 5 years. (x ) While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation. ( x ) This acquisition is for supplies for which the Government does not possess complete, unrestrictive technical data; therefore, the Government intends to solicit and contract with only approved sources under the authority of 10 USC 2304(c)(1). Approved sources are: Overseas Hardwoods Co (8N013)

Inactive

***Sources Sought*** This is not a request for either a quote or proposal. This announcement is considered market research in accordance with FAR Part 10. *** NO SOLICITATION IS BEING ISSUED AT THIS T... ***Sources Sought*** This is not a request for either a quote or proposal. This announcement is considered market research in accordance with FAR Part 10. *** NO SOLICITATION IS BEING ISSUED AT THIS TIME *** The purpose of this synopsis is to identify qualified vendors capable of manufacturing items in accordance with the requirements listed below. Please review the below NSNs and provide us with any additional sources that are able to manufacture these items. Please provide the company name, city and state OR country if applicable, and POCs with telephone, fax and/or email information. All of this information can be submitted to Scott Knowles at Scott.Knowles@dla.mil. Phone 614 692-0639. We thank you in advance for your assistance. NSN NAME 2510-01-521-2739 PARTS KIT, FLOOR, VEHICULAR 2510-01-521-8018 PARTS KIT, FLOOR, VEHICULAR 2510-01-582-5403 PARTS KIT, FLOOR, VEHICULAR Responses to this Request for Information (RFI) are not considered offers and cannot be accepted by the Government to form a binding contract. This RFI is for market research purposes only. Any information submitted is at the company's own expense. The Government will not reimburse respondents for any costs associated with submission of capability statements in connection with the market survey. Any information provided is voluntary. *** NO SOLICITATION IS BEING ISSUED AT THIS TIME *** --------------------------------------- ITEM DESCRIPTIONS: NSN: 2510-01-521-2739 PARTS KIT,FLOOR,VEHICULAR RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES CA061: ADEQUATE DATA FOR THE EVALUATION OF ALTERNATE OFFERS IS NOT AVAILABLE AT THE PROCUREMENT AGENCY.THE OFFEROR MUST PROVIDE A COMPLETE DATA PACKAGE INCLUDING DATA FOR THE APPROVED AND ALTERNATE PART FOR EVALUATION. ZD074: THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM - (TO INCLUDE 'COMMERCIAL OF A TYPE') OVERSEAS HARDWOODS CO INC 8N013 P/N M871A2-KIT PREP FOR DELIVERY PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z UNIT CONT:FW OPI:M PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:ZZ -ZZ Special Requirements PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT CS259: "PRESERVATION & PACKAGING SHALL BE I/A/W THE LATEST REVISION OF MILITARY SPECIFICATION MIL-STD-2073-1 APPENDIX D, FOR PACKAGING OF "KITS". PER MIL-STD-2073-1D, APPENDIX D, PARAGRAPH D.3.1.b: METHOD OF PRESERVATION SHALL AFFORD ADEQUATE PROTECTION TO THE MOST CRITICAL ITEM CONTAINED WITHIN THE KIT. NOTE: All loose hardware shall be contained within a sealed container (bag/box) and the highest applicable preservation method (based on physical characteristics of items) shall be applied to ensure items will not be damaged or experience corrosion. In addition, packaged hardware shall be placed within each individual unit container to ensure items do not damage (dent, scratch, nick, etc.) the part or any components therein. NOTE: Hardware for shipments cannot be shipped in bulk. It is not an acceptable practice. Material must arrive in serviceable condition and meet the contractual quantity unit pack requirements. Thus, requiring no additional sorting, packaging, and/or marking by user or depot personnel. ADDITIONAL SPECIAL MARKING REQUIREMENTS: 02 - ARROW UP; OPEN THIS SIDE. SEGREGATION AND INDIVIDUAL IDENTIFICATION REQUIREMENTS ARE LISTED IN MIL-STD-2073-1, APPENDIX D, PARAGRAPH D.4.2. A PARTS LIST (WITH PART NAME, PART NUMBER & QUANTITY) SHALL BE INCLUDED WITHIN EACH KIT. IF APPLICABLE, ASSEMBLY INSTRUCTIONS SHALL ALSO BE INCLUDED WITHIN EACH PACKAGE. ----------------------------------------------------------------- NSN: 2510-01-521-8018 PARTS KIT, FLOOR, VEHICULAR.(WOOD FLOORING) RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES END ITEM, M872A4 TRAILER (600 DECK SCREWS ARE NOT INCLUDED IN THE ASSEMBLY PER OEM) CA060: NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE INCLUDING DATA FOR THE APPROVED AND ALTERNATE PART FOR EVALUATION. ZD074: THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM - (TO INCLUDE 'COMMERCIAL OF A TYPE') OVERSEAS HARDWOODS CO INC 8N013 P/N M872-A4 PREP FOR DELIVERY PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C UNIT CONT:FU OPI:M PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:ZZ -ZZ Special Requirements PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT CS259: "PRESERVATION & PACKAGING SHALL BE I/A/W THE LATEST REVISION OF MILITARY SPECIFICATION MIL-STD-2073-1 APPENDIX D, FOR PACKAGING OF "KITS". QUANTITY UNIT PACK (QUP) IS ONE (1). EACH KIT IS REQUIRED TO BE PACKAGED INDIVIDUALLY. PER MIL-STD-2073-1, APPENDIX D, PARAGRAPH D.3.1.b: METHOD OF PRESERVATION (MOP) SHALL AFFORD ADEQUATE PROTECTION TO THE MOST CRITICAL ITEM CONTAINED WITHIN THE KIT. PACK CODE=Z: CONTRACTOR SHALL ENSURE PACKAGE DESIGN IS ADEQUATE FOR DOD DELIVERIES PER ASTM D4169, DISTRIBUTION CYCLE 18, ASSURANCE LEVEL II, ACCEPTANCE CRITERIA 3 -OR- PROVIDE MILITARY PACKAGING DESIGN VALIDATION DOCUMENTATION LISTED IN MIL-STD-2073-1, PARAGRAPH 5.6 AND APPENDIX F. NOTE: All loose hardware shall be contained within a sealed container (bag/box) and the highest applicable preservation method (based on physical characteristics of items) shall be applied to ensure items will not be damaged or experience corrosion. In addition, packaged hardware shall be placed within each individual unit container to ensure items do not damage (dent, scratch, nick, etc.) the part or any components therein. NOTE: Hardware for shipments cannot be shipped in bulk. It is not an acceptable practice. Material must arrive in serviceable condition and meet the contractual quantity unit pack requirements. Thus, requiring no additional sorting, packaging, and/or marking by user or depot personnel. ZZ - SPECIAL MARKING REQUIREMENTS: 02 - ARROW UP 14 - CENTER OF BALANCE OPEN THIS SIDE MECHANICAL HANDLING REQUIRED SEGREGATION AND INDIVIDUAL IDENTIFICATION REQUIREMENTS ARE LISTED IN MIL-STD-2073-1, APPENDIX D, PARAGRAPH D.4.2. A PARTS LIST (WITH PART NAME, PART NUMBER & QUANTITY) SHALL BE INCLUDED WITHIN EACH KIT PACKING LIST. IF APPLICABLE, ASSEMBLY INSTRUCTIONS SHALL ALSO BE INCLUDED WITHIN EACH UNIT PACKAGE. PACKAGE DESIGN SHALL ENSURE SAFE DELIVERY TO ULTIMATE USER. IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION, PACKAGING, PACKING AND MARKING. --------------------------------------------------------- NSN: 2510-01-582-5403 PARTS KIT,FLOOR,VEH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES ZD074: THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM - (TO INCLUDE 'COMMERCIAL OF A TYPE') OVERSEAS HARDWOODS CO INC 8N013 P/N M1FRFKT PREP FOR DELIVERY PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C UNIT CONT:F2 OPI:M PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:ZZ -ZZ Special Requirements PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT CS259: "PRESERVATION & PACKAGING SHALL BE I/A/W THE LATEST REVISION OF MILITARY SPECIFICATION MIL-STD-2073-1 APPENDIX D, FOR PACKAGING OF "KITS". DESICCANT REQUIRED AND SHALL NOT MAKE DIRECT CONTACT WITH ANY KIT COMPONENTS - SEE MIL-STD-2073-1, PARAGRAPHS 5.2.3.7 a-c FOR DETAILS ABOUT DESICCANT AND HOW TO CALCULATE QUANTITY. PER MIL-STD-2073-1, APPENDIX D, PARAGRAPH D.3.1.b: METHOD OF PRESERVATION (MOP) SHALL AFFORD ADEQUATE PROTECTION TO THE MOST CRITICAL ITEM CONTAINED WITHIN THE KIT. PACK CODE=Z: CONTRACTOR SHALL ENSURE PACKAGE DESIGN IS ADEQUATE FOR DOD DELIVERIES PER ASTM D4169, DISTRIBUTION CYCLE 18, ASSURANCE LEVEL II, ACCEPTANCE CRITERIA 3 -OR- PROVIDE MILITARY PACKAGING DESIGN VALIDATION DOCUMENTATION LISTED IN MIL-STD-2073-1, PARAGRAPH 5.6 AND APPENDIX F. NOTE: All loose hardware shall be contained within a sealed container (bag/box) and the highest applicable preservation method (based on physical characteristics of items) shall be applied to ensure items will not be damaged or experience corrosion. In addition, packaged hardware shall be placed within each individual unit container to ensure items do not damage (dent, scratch, nick, etc.) the part or any components therein. NOTE: Hardware for shipments cannot be shipped in bulk. It is not an acceptable practice. Material must arrive in serviceable condition and meet the contractual quantity unit pack requirements. Thus, requiring no additional sorting, packaging, and/or marking by user or depot personnel. ZZ = SPECIAL MARKING REQUIREMENTS: 02 - ARROW UP OPEN THIS SIDE. 14 - CENTER OF BALANCE 24 - OPEN FOR INSPECTION OR USE ONLY ATTENTION: INDOOR STORAGE ONLY FOR QUALITY CONTROL PURPOSES TEAM LIFT OR MECHANICAL HANDLING SEGREGATION AND INDIVIDUAL IDENTIFICATION REQUIREMENTS ARE LISTED IN MIL-STD-2073-1, APPENDIX D, PARAGRAPH D.4.2. A PARTS LIST (WITH PART NAME, PART NUMBER & QUANTITY) SHALL BE INCLUDED WITHIN EACH KIT. IF APPLICABLE, ASSEMBLY INSTRUCTIONS SHALL ALSO BE INCLUDED WITHIN EACH UNIT PACKAGE. PACKAGE DESIGN SHALL ENSURE SAFE DELIVERY TO ULTIMATE USER. ----------------------------------