Inactive Total Small Business Set-Aside (FAR 19.5)

NSN(s): 6140-01-446-9498 Item Description: SEE RFQ Manufacturer’s Code and Part Number (if applicable): N/A Drawing Number (if applicable): SEE RFQ Specification Number (if applicable): N/A Qualificat... NSN(s): 6140-01-446-9498 Item Description: SEE RFQ Manufacturer’s Code and Part Number (if applicable): N/A Drawing Number (if applicable): SEE RFQ Specification Number (if applicable): N/A Qualification Requirements (e.g. QPL) and where information on qualification requirements may be obtained. (if applicable): N/A Quantity (including option quantity) : Anticipated type of contract is an IDC. Items to be shipped to various military depot locations within established minimum & maximum quantity limits on an as needed basis. Unit of Issue: EA Destination Information: FOB DESTINATION – STOCK ONLY Delivery Schedule: SEE RFQ ** Anticipated type of contract is an Indefinite Quantity Contract (IQC), I/A/W FAR Part 12 procedures. All responsible SMALL BUSINESS sources may submit an offer/quote which shall be considered. --- ( x ) The solicitation will be available on DLA’s Internet Bid Board Site (https://www.dibbs.bsm.dla.mil/RFP/) on or about 09/06/2022. ( x ) The Small Business size standard is _1250_ employees. ( x ) The proposed procurement contains an option to extend the contract period one or more times at the discretion of the government. The total duration (base plus option years) shall not exceed 5 years. (x ) While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation TYPE OF SET-ASIDE: 100% SBSA ----------------------------------------------------------------------------------------------------------------------------- NSN: 6140-01-446-9498 BATTERY, STORAGE LEAD-ACID, DRY CHARGED, MAINTENANCE FREE SUPPLIED WITH ACID OVERPACK (ELECTROLYTE) D.O.T. CLASS: CORROSIVE UN2796 SHIPPING NAME: BATTERY, FLUID ACID RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER) RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RT001: MEASURING AND TEST EQUIPMENT CONTRACTOR FAT NUMBER OF UNITS REQUIRED TO BE TESTED: 10 BATTERIES, 4 EA. CONTAINER, 7 EA. COVERS PER ATPD 2206 ZD025: MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D). ZD072: Hazard Communication Standard Notice: Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities. The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals. As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating the applicable information on labels. In accordance with the revised standard after June 1, 2015: 1. Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheets consistent with the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government. 2. Suppliers will also be required to submit, to the contracting officer for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials delivered to the Government. 3. Finally, suppliers must train their employees on the new safety data sheets, hazardous communication labels, and requirements of 29 C.F.R. 1910.1200. For more information on SDS, refer to OSHAs website, available at: https://www.osha.gov/law-regs.html For information on 29 C.F.R. 1910.1200, refer to the below link: https://www.osha.gov/dsg/hazcom/index.html RS062: Shelf life requirement RS001 for a TYPE 2 (CODE 9) item with a shelf life of 60 month (extendable) applies to this item. ZD080 :SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. SHELF LIFE: TYPE II, 60 MONTHS FIRST ARTICLE TESTING AS REQUIRED BY PARA 4.4 CORRECTION TO ATPD 2206 REV 7 AS FOLLOWS: PARA. 4.6.17.A IS CHANGED TO INDICATE "-54 +/- 1 DEGREE C" IN LIEU OF "-48 +/- 1 DEGREE C". EXCEPTION TO SPEC: DELETE REQUIREMENT 3.3.12<(>,<)> DELETE 3.2.2 IN ITS ENTIRETY AND REFERENCE TO 3.2.2 IN 4.6.1 END OF EXCEPTIONS. A0003: MIL-STD-130N(1) DATED 16 NOV 2012. IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY CA070: FULL AND OPEN COMPETITION APPLY ZD074: THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM - (TO INCLUDE 'COMMERCIAL OF A TYPE') CRITICAL APPLICATION ITEM IAW BASIC DRAWING NR 19207 ATPD2206 REVISION NR 7 DTD 08/13/2001 PART PIECE NUMBER: 6TMF/TYPEI IAW REFERENCE SPEC NR MS52149G NOT 2 REVISION NR DTD 06/12/2015 PART PIECE NUMBER: PREP FOR DELIVERY PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0 UNIT CONT:D4 OPI:M PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:33 -33 Type II, shelf life PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT Container for Battery Fluid Acid shall conform to latest version of IATA specification for plastic containers, overpack within a 4G fiberboard box, Box shall be one per battery. THIS MATERIAL IS CONSIDERED HAZARDOUS MATERIAL AND REQUIRES SPECIAL PACKAGING, MARKING, AND LABELING. PLEASE ENSURE THAT ALL PACKAGING REQUIREMENTS AS DETAILED IN THE CONTRACT ARE MET. THIS BATTERY IS REGULATED BY THE DEPARTMENT OF TRANSPORTATION (DOT). A MATERIAL SAFETY DATA SHEET SHALL ACCOMPANY EACH SHIPMENT. HAZARDOUS MATERIAL PACKAGING REQUIREMENTS SHALL COMPLY WITH TITLE 49 CODE OF FEDERAL REGULATIONS (CFR). AUTHORIZED SPECIFICATION PACKAGINGS FOR BATTERIES ARE LOCATED IN TITLE 49 CFR, PARAGRAPH 173.159. SELECTION OF AUTHORIZED SPECIFICATION PACKAGINGS MUST ENSURE IT DOES NOT EXCEED THE WEIGHT AND SIZE LIMITATIONS OF THE CONTAINER. SELECTED AUTHORIZED SPECIFICATION PACKAGINGS SHALL ADEQUATELY PROTECT THE BATTERY AGAINST SHOCK AND VIBRATION AND ENSURE TABS TO DO NOT BREAK AND CAUSE AN INTERNAL SHORT CIRCUIT WITHIN THE BATTERY. AUTHORIZED SPECIFICATION PACKAGINGS (CONTAINERS) SHALL NOT BE DAMAGED IN ANY WAY. ASSETS UNDER THESE CONDITIONS SHALL BE CONSIDERED AN UNACCEPTABLE PRODUCT AND SHALL NOT BE SHIPPED TO ANY DEPOT, OR CUSTOMER, OR RECEIVED INTO ANY DOD INVENTORY SYSTEM. MATERIAL WILL BE REFUSED AND RETURNED TO CONTRACTOR. EACH CONTAINER SHALL BE MARKED AND LABELED IN ACCORDANCE WITH THE GOVERNING HAZARDOUS MATERIAL REGULATION (DEPENDENT UPON MODE OF TRANSPORTATION) AND IN ACCORDANCE WITH MIL-STD-129 TO BE PROPERLY IDENTIFIED AND RECEIVED INTO INVENTORY. SHELF LIFE MARKINGS SHALL BE APPLIED TO THE CONTAINER'S LABEL TO ENSURE STORAGE CONTROLS ARE IN PLACE AND INSPECTION DATA IS AVAILABLE. PROPER SHIPPING NAME, UN NUMBER, HAZARD CLASS, AND PACKING GROUP REQUIRED TO BE MARKED ON EACH CONTAINER HAZARD WARNING LABEL REQUIRED ON EACH AUTHORIZED PACKAGING (CONTAINER): CORROSIVE, AS DISPLAYED BELOW. IN ADDITION, ORIENTATION LABELS SHALL BE APPLIED TO THE PACKAGE TO ENSURE IT DOES NOT LEAK (ARROW UP, ILLUSTRATION ONLY). ALL IDENTIFICATION MARKINGS AND HAZARD WARNING LABELS SHALL BE PLACED ON THE SAME CONTAINER PANEL. ALL NON-POP CONTAINERS SHALL MEET BOX MAKERS CERTIFICATE REQUIREMENTS IN ORDER TO ADEQUATELY HOLD LOAD IMPOSED. CHECK SPECIFICATION FOR WEIGHT LIMITATION AND CHECK PACKAGED WEIGHT TO ENSURE THE CONTAINER CAN ADEQUATELY PROTECT THE BATTERY DURING HANDLING, STORAGE, AND/OR TRANSPORTATION. SHIPMENTS BY MILITARY AIR SHALL USE AFMAN 24-204 SHIPPERS DECLARATION TO ENSURE MATERIAL WILL NOT BE FRUSTRATED AT AERIAL PORTS.

Inactive

***Sources Sought*** This is not a request for either a quote or proposal. This announcement is considered market research in accordance with FAR Part 10. NO SOLICITATION IS BEING ISSUED AT THIS TIME.... ***Sources Sought*** This is not a request for either a quote or proposal. This announcement is considered market research in accordance with FAR Part 10. NO SOLICITATION IS BEING ISSUED AT THIS TIME. The purpose of this synopsis is to identify qualified vendors capable of manufacturing items in accordance with the requirements listed below. Please review the below NSNs and provide us with any additional sources that are able to manufacture these items. Please provide the company name, city and state OR country if applicable, and POCs with telephone, fax and/or email information. All of this information can be submitted to Scott Knowles at Scott.Knowles@dla.mil. Phone 614 692-0639. We thank you in advance for your assistance. Responses to this Request for Information (RFI) are not considered offers and cannot be accepted by the Government to form a binding contract. This RFI is for market research purposes only. Any information submitted is at the company's own expense. The Government will not reimburse respondents for any costs associated with submission of capability statements in connection with the market survey. Any information provided is voluntary. NSN 6140-01-446-9498 BATTERY, STORAGE LEAD-ACID, DRY CHARGED, MAINTENANCE FREE SUPPLIED WITH ACID OVERPACK (ELECTROLYTE) D.O.T. CLASS: CORROSIVE UN2796 SHIPPING NAME: BATTERY, FLUID ACID RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER) RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RT001: MEASURING AND TEST EQUIPMENT ZD025: MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D). ZD072: Hazard Communication Standard Notice: Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities. The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals. As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating the applicable information on labels. In accordance with the revised standard after June 1, 2015: 1. Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheets consistent with the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government. 2. Suppliers will also be required to submit, to the contracting officer for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials delivered to the Government. 3. Finally, suppliers must train their employees on the new safety data sheets, hazardous communication labels, and requirements of 29 C.F.R. 1910.1200. For more information on SDS, refer to OSHAs website, available at: https://www.osha.gov/law-regs.html For information on 29 C.F.R. 1910.1200, refer to the below link: https://www.osha.gov/dsg/hazcom/index.html RS062: Shelf life requirement RS001 for a TYPE 2 (CODE 9) item with a shelf life of 60 month (extendable) applies to this item. ZD080 :SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. SHELF LIFE: TYPE II, 60 MONTHS FIRST ARTICLE TESTING AS REQUIRED BY PARA 4.4 CORRECTION TO ATPD 2206 REV 7 AS FOLLOWS: PARA. 4.6.17.A IS CHANGED TO INDICATE "-54 +/- 1 DEGREE C" IN LIEU OF "-48 +/- 1 DEGREE C". EXCEPTION TO SPEC: DELETE REQUIREMENT 3.3.12<(>,<)> DELETE 3.2.2 IN ITS ENTIRETY AND REFERENCE TO 3.2.2 IN 4.6.1 END OF EXCEPTIONS. CONTRACTOR FAT NUMBER OF UNITS REQUIRED TO BE TESTED: 10 BATTERIES, 4 EA. CONTAINER, 7 EA. COVERS. DAYS REQUIRED TO SUBMIT TEST REPORT: 180 DAYS REQUIRED BY THE GOVERNMENT TO TEST APPROVE/DISAPPROVE: 30 WAIVED SOURCES: 20038 DD FORM 1423 REQUIRED: NO RECOMMEND DELEGATION TO THE ACO: YES DISPOSITION OF TESTED MATERIAL: FIRST ARTICLE SAMPLES SHALL NOT BE SHIPPED AS PART OF THE TOTAL CONTRACT QUANTITY. FAT Waived sources include Cage: 20038 and Cage: 8ZD56 A0003: MIL-STD-130N(1) DATED 16 NOV 2012. IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY CA070: FULL AND OPEN COMPETITION APPLY CRITICAL APPLICATION ITEM IAW BASIC DRAWING NR 19207 ATPD2206 REVISION NR 7 DTD 08/13/2001 PART PIECE NUMBER: 6TMF/TYPEI IAW REFERENCE SPEC NR MS52149G NOT 2 REVISION NR DTD 06/12/2015 PART PIECE NUMBER: PREP FOR DELIVERY PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0 UNIT CONT:D4 OPI:M PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:33 -33 Type II, shelf life PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT Container for Battery Fluid Acid shall conform to latest version of IATA specification for plastic containers, overpack within a 4G fiberboard box, Box shall be one per battery. THIS MATERIAL IS CONSIDERED HAZARDOUS MATERIAL AND REQUIRES SPECIAL PACKAGING, MARKING, AND LABELING. PLEASE ENSURE THAT ALL PACKAGING REQUIREMENTS AS DETAILED IN THE CONTRACT ARE MET. THIS BATTERY IS REGULATED BY THE DEPARTMENT OF TRANSPORTATION (DOT). A MATERIAL SAFETY DATA SHEET SHALL ACCOMPANY EACH SHIPMENT. HAZARDOUS MATERIAL PACKAGING REQUIREMENTS SHALL COMPLY WITH TITLE 49 CODE OF FEDERAL REGULATIONS (CFR). AUTHORIZED SPECIFICATION PACKAGINGS FOR BATTERIES ARE LOCATED IN TITLE 49 CFR, PARAGRAPH 173.159. SELECTION OF AUTHORIZED SPECIFICATION PACKAGINGS MUST ENSURE IT DOES NOT EXCEED THE WEIGHT AND SIZE LIMITATIONS OF THE CONTAINER. SELECTED AUTHORIZED SPECIFICATION PACKAGINGS SHALL ADEQUATELY PROTECT THE BATTERY AGAINST SHOCK AND VIBRATION AND ENSURE TABS TO DO NOT BREAK AND CAUSE AN INTERNAL SHORT CIRCUIT WITHIN THE BATTERY. AUTHORIZED SPECIFICATION PACKAGINGS (CONTAINERS) SHALL NOT BE DAMAGED IN ANY WAY. ASSETS UNDER THESE CONDITIONS SHALL BE CONSIDERED AN UNACCEPTABLE PRODUCT AND SHALL NOT BE SHIPPED TO ANY DEPOT, OR CUSTOMER, OR RECEIVED INTO ANY DOD INVENTORY SYSTEM. MATERIAL WILL BE REFUSED AND RETURNED To CONTRACTOR. EACH CONTAINER SHALL BE MARKED AND LABELED IN ACCORDANCE WITH THE GOVERNING HAZARDOUS MATERIAL REGULATION (DEPENDENT UPON MODE OF TRANSPORTATION) AND IN ACCORDANCE WITH MIL-STD-129 TO BE PROPERLY IDENTIFIED AND RECEIVED INTO INVENTORY. SHELF LIFE MARKINGS SHALL BE APPLIED TO THE CONTAINER'S LABEL TO ENSURE STORAGE CONTROLS ARE IN PLACE AND INSPECTION DATA IS AVAILABLE. PROPER SHIPPING NAME, UN NUMBER, HAZARD CLASS, AND PACKING GROUP REQUIRED TO BE MARKED ON EACH CONTAINER HAZARD WARNING LABEL REQUIRED ON EACH AUTHORIZED PACKAGING (CONTAINER): CORROSIVE, AS DISPLAYED BELOW. IN ADDITION, ORIENTATION LABELS SHALL BE APPLIED TO THE PACKAGE TO ENSURE IT DOES NOT LEAK (ARROW UP, ILLUSTRATION ONLY). ALL IDENTIFICATION MARKINGS AND HAZARD WARNING LABELS SHALL BE PLACED ON THE SAME CONTAINER PANEL. ALL NON-POP CONTAINERS SHALL MEET BOX MAKERS CERTIFICATE REQUIREMENTS IN ORDER TO ADEQUATELY HOLD LOAD IMPOSED. CHECK SPECIFICATION FOR WEIGHT LIMITATION AND CHECK PACKAGED WEIGHT TO ENSURE THE CONTAINER CAN ADEQUATELY PROTECT THE BATTERY DURING HANDLING, STORAGE, AND/OR TRANSPORTATION. SHIPMENTS BY MILITARY AIR SHALL USE AFMAN 24-204 SHIPPERS DECLARATION TO ENSURE MATERIAL WILL NOT BE FRUSTRATED AT AERIAL PORTS.