Inactive Total Small Business Set-Aside (FAR 19.5)

NSN 2530-00-856-2299 Item Description: SEE RFP Drawing No: SEE RFP Quantity: Anticipated type of contract is an IQC. Item to be shipped to various military depot locations within the established minim... NSN 2530-00-856-2299 Item Description: SEE RFP Drawing No: SEE RFP Quantity: Anticipated type of contract is an IQC. Item to be shipped to various military depot locations within the established minimum & maximum quantity limits on an as needed basis. Unit of Issue: EA Destination Information: FOR ORIGIN - STOCK ONLY Delivery Schedule: SEE RFP All domestic small business sources may submit an offer/quote which shall be considered. --------- Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contacting offer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice. (x) The solicitation will be available on DLA's Internet Bid Board Site (https://www.dibbs.bsm.dla.mil/RFP/) on or about 04/09/2020. (x) The Small Business size standard is 750 employees. (x) The proposed procurement containes an option to extend the contract period one more times at the discretion of the government. The total duration (base plus option years) shall not exceed 5 years. (x) While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation. TYPE OF SET-ASIDE: 100% Set-aside

Inactive

***Sources Sought*** This is not a request for either a quote or proposal. This announcement is considered market research in accordance with FAR Part 10. NO SOLICITATION IS BEING ISSUED AT THIS TIME.... ***Sources Sought*** This is not a request for either a quote or proposal. This announcement is considered market research in accordance with FAR Part 10. NO SOLICITATION IS BEING ISSUED AT THIS TIME. The purpose of this synopsis is to identify qualified vendors capable of manufacturing items in accordance with the requirements listed below. Please review the below NSNs and provide us with any additional sources that are able to manufacture these items. Please provide the company name, city and state OR country if applicable, and POCs with telephone, fax and/or email information. All of this information can be submitted to Scott Knowles at Scott.Knowles@dla.mil. Phone 614 692-0639. We thank you in advance for your assistance. NSN NAME 2530-00-856-2299 WHEEL, METAL TIRE Responses to this Request for Information (RFI) are not considered offers and cannot be accepted by the Government to form a binding contract. This RFI is for market research purposes only. Any information submitted is at the company's own expense. The Government will not reimburse respondents for any costs associated with submission of capability statements in connection with the market survey. Any information provided is voluntary. ITEM DESCRIPTION NSN: 2530-00-856-2299 WHEEL, METAL TIRE RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RQ032: EXPORT CONTROL OF TECHNICAL DATA This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data. The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at: https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/ To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data. RD002: COVERED DEFENSE INFORMATION APPLIES ZD003: A metal casting process was identified as a means to manufacture this item. Tooling is required to produce a casting. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C&E Supply Chains) DSCR.AFCAT@dla.mil; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER) RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS) RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED MANUFACTURERS LIST (QML)" APPLY. ZD087: THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML REQUIREMENTS. BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE QPL(S)/QML(S). CS187: CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS. CA070: FULL AND OPEN COMPETITION APPLY CRITICAL APPLICATION ITEM IAW BASIC DRAWING NR 19207 10907799 REVISION NR H DTD 11/22/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12369930 REVISION NR B DTD 05/15/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12369003 REVISION NR H DTD 09/24/2018 PART PIECE NUMBER: IAW REFERENCE QAP 19207 10907799 REVISION NR G DTD 11/22/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 10907799 REVISION NR DTD 01/07/2020 PART PIECE NUMBER: PREP FOR DELIVERY LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP:001 PRES MTHD:20 CLNG/DRY:1 PRESV MAT:49 WRAP MAT:GC CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:B UNIT CONT:ED OPI:M PACK CODE = Q: PACKING LEVEL = B: MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:ZZ -ZZ Special Requirements PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008 ZZ - ADDITIONAL SPECIAL MARKING: CONTROLLED ITEM. SPECIAL MARKINGS REQUIRED PER MIL-STD-129, PARAGRAPH 5.4.1.6 (PROTECTED CARGO): THE ITEM DESCRIPTION (NOMENCLATURE) SHALL BE OMITTED FROM THE MIL-STD-129 LABEL FOR ALL SHIPPING CONTAINERS. 40 - OMISSION OF MARKING FOR SENSITIVE, CONTROLLED, OR PILFERABLE ITEMS PER MIL-STD-12. IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS