Inactive Total Small Business Set-Aside (FAR 19.5)

- *** LTC PID Packaging Consolidated Text *** - PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN. CLIN 0001:... - *** LTC PID Packaging Consolidated Text *** - PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN. CLIN 0001: NSN: 6130-00-444-2809 POWER SUPPLY REFERENCE NUMBER:RP001 REFERENCE NUMBER:RD002 REFERENCE NUMBER:RA001 REFERENCE NUMBER:RQ001 REFERENCE NUMBER:RQ002 REFERENCE NUMBER:RQ011 REFERENCE NUMBER:E0115 CRITICAL APPLICATION ITEM BEHLMAN ELECTRONICS, INC. DBA 12868 P/N 374557-2 SC ELECTRONICS INC 0YGA2 P/N 374557-2 PREP FOR DELIVERY LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS PKGING DATA-QUP:001 WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951. CLIN 0002: NSN:6130-01-223-5716 POWER SUPPLY REFERENCE NUMBER:RP001 REFERENCE NUMBER:RD002 REFERENCE NUMBER:RA001 REFERENCE NUMBER:RQ011 REFERENCE NUMBER:A0003 REFERENCE NUMBER:CA060 REFERENCE NUMBER:ZD025 SC ELECTRONICS INC 0YGA2 P/N 13083229-1 LOCKHEED MARTIN CORPORATION DBA 04939 P/N 13083229 PREP FOR DELIVERY LINE ITEM 00002 TYPE OF COVERAGE: DLA DIRECT, CONUS PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00 WRAP MAT:XX CUSH/DUNN MAT:XX CUSH/DUNN THKNESS:D UNIT CONT:E5 OPI:O INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA PACK CODE = E: PACKING LEVEL = B: MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008 CLIN 0003: NSN:6130-01-621-3718 INVERTER,POWER,STATIC REFERENCE NUMBER:RP001 REFERENCE NUMBER:RA001 REFERENCE NUMBER:RQ011 REFERENCE NUMBER:ZD080 REFERENCE NUMBER:CA060 REFERENCE NUMBER:ZD025 SC ELECTRONICS INC 0YGA2 P/N SCE825 PREP FOR DELIVERY LINE ITEM 00003 TYPE OF COVERAGE: DLA DIRECT, CONUS PKGING DATA-QUP:001 WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951. ************************************************************************************* GLOSSARY ************************************************************************************* PACKAGING TEXT THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT: All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. ITEM DESCRIPTION TEXT REFERENCE NUMBER RP001 RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT REFERENCE NUMBER RD002 RD002, COVERED DEFENSE INFORMATION APPLIES REFERENCE NUMBER RA001 RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. REFERENCE NUMBER RQ001 RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS) REFERENCE NUMBER RQ002 RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER) REFERENCE NUMBER RQ011 RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES REFERENCE NUMBER E0115 NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE INCLUDING DATA FOR THE APPROVED AND ALTERNATE PART FOR EVALUATION. REFERENCE NUMBER A0003 MIL-STD-130N(1) DATED 16 NOV 2012. IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY REFERENCE NUMBER CA060 NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE INCLUDING DATA FOR THE APPROVED AND ALTERNATE PART FOR EVALUATION. REFERENCE NUMBER ZD025 MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D). REFERENCE NUMBER ZD080 SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.