Inactive

NSN(s): 3040015765056 Item Description: BRAKE SHOE Item is being procured in accordance with: INDUSTRIAL CLUTCH BRAKE, INC. DBA 1FA43 P/N 7664298 FARIN INDUSTRIES INC 3XYN6 P/N 75A Quantity: 1,784 wit... NSN(s): 3040015765056 Item Description: BRAKE SHOE Item is being procured in accordance with: INDUSTRIAL CLUTCH BRAKE, INC. DBA 1FA43 P/N 7664298 FARIN INDUSTRIES INC 3XYN6 P/N 75A Quantity: 1,784 with a 100% option Unit of Issue: EA Inspection/Acceptance: Destination FOB: Origin – First Destination and Transportation (FDT) applies Delivery Schedule: 45 days Ship to: W25G1U DLA DISTRIBUTION NEW CUMBERLAND FACILITY One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the US by the Trade Agreements Act of 1979. All offers shall be in the English language and in US dollars. All responsible sources may submit an offer/quote which shall be considered.. The solicitation will be available on the Internet at http://www.dibbs.bsm.dla.mil/rfp on or about 01/29/2020 The Small Business size standard is 750 employees. Hard copies of this solicitation are not available. Technical drawings/bid sets are available after the same issue date on the Internet at http://www.dibbs.bsm.dla.mil/ then click the cFloders under the Technical Data tab. Requests should include the RFP number, opening/closing date, NSN, purchase Request Number, buyer’s name and your complete name and address. FEDERAL, MILITARY AND COMMERCIAL SPECIFICATIONS CANNOT BE PROVIDED BY DSCC. EXPORT CONTROL OF TECHNICAL DATA: This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data. The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at: https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/ To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data. Based on market research this item is manufactured for military use only and is not commercial; therefore, the Government is not using the policies contained in FAR Part 12 in its solicitation for this item. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government’s requirement with a commercial item with 15 days of this notice. While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation. . L&M Proc Note 215-9008 INSTRUCTIONS FOR SUBMISSION OF OFFERS will be included in the solicitation. The following method(s) of submitting a proposal are authorized in the solicitation: DIBBS Upload – to submit an offer through DIBBS, search for the solicitation then click the red “offer” button on the search results screen. (Note: Users must be logged onto DIBBS in order to submit the offer through DIBBS.) For additional guidance, refer to https://www.dibbs.bsm.dla.mil/refs/help/solicitations/DIBBS-Upload-Offer-User-Help.pdf Email Proposals - Proposals, including modifications and revisions per FAR 15.203(c)), may be received by electronic commerce methods

Inactive

NSN 3040-01-576-5056 The AMC/AMSC for the NSN listed above is "1 B" Primary Point of Contact: Mindy M Cook, Contract Specialist AMC 1. Suitable for competitive acquisition for the second or subsequent... NSN 3040-01-576-5056 The AMC/AMSC for the NSN listed above is "1 B" Primary Point of Contact: Mindy M Cook, Contract Specialist AMC 1. Suitable for competitive acquisition for the second or subsequent time AMSC B. This part must be acquired from a manufacturing source(s) specified on a source control or selected item drawing as defined by the current version of DoD-STD-100. Suitable technical data, Government data rights, or manufacturing knowledge are not available to permit acquisition from other sources, nor qualification testing of another part, nor use of a second source part in the intended application. Although, by DoD-STD-100 definition, altered and selected items shall have an adequate technical data package, data review discloses that required data or data rights are not in Government possession and cannot be economically obtained. If one source is available, AMCs 3, 4, or 5 are valid. If at least two sources exist, AMCs 1 or 2 are valid. Purchased in accordance with: Farin Industries Inc 3XYN6 P/N 75A INDUSTRIAL CLUTCH BRAKE, INC. DBA 1FA43 P/N 7664298 DRAWING NR 53711 P/N 7664298 REV- SH 1 OF 1 Please review the NSN listed above and provide any sources that may be able to manufacture this item. All information be submitted directly to the Contracting Officer listed above. This information must be provided by the response date indicated above. NOTE: This project contains Drawings/Specifications. Vendors may access the applicable drawings/specifications by querying SPE7L519R0MR6 within the solicitation field at the following cfolders link: https://pcf1.bsm.dla.mil/cfolders. Drawings cannot be accessed through DIBBS at this time. The applicable North American Classification System (NAICS) code is 335314 with Small Business size standard of 750 employees. This SOURCES SOUGHT notice is for informational and planning purposes only and shall not be construed as a solicitation or as an obligation or commitment by the Government. This notice is strictly for market research. This is NOT a solicitation for proposals, proposal abstracts, or quotations. The purpose of this notice is to be obtain information regarding the capability and availability of qualified businesses that are capable of executing this potential contract. The Government is not obligated and will not pay for any information received from potential sources as a result of this notice. Your response to the information requested will assist the Government in determining the appropriate acquisition method. Sources interested in providing an offer on the solicitation, should complete the attached market survey and return the completed copy to Mindy Cook via email at mindy.cook@dla.mil. STO CS001 This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR) and cannot be exported without the authorization of either the Department of State or the Department of Commerce prior to export. Export includes disclosure of technical data to foreign nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees or U.S. companies and their foreign subsidiaries. DLA has enhanced its Joint Certification Program (JCP) registration and validation procedures. Selected National Stock Numbers (NSNs) will require additional permissions to access the associated technical data. In the event a vendor cannot access the technical data for a NSN in DLA cFolders, the vendor must submit a onetime request to jcpvalidation@dla.mil for technical data access consideration. If a vendor has inquiries after having submitted required information to the JCP office, these inquiries are to be directed to DLAJ344DataCustodian@dla.mil. DLA processes the vendor's technical data request on a first come, first served basis. Failure to comply timely with required information may result in lack of consideration for DLA solicitations. It is vitally important that vendors provide correct company official name(s) and contact information in all correspondence. DLA will work diligently on validating vendor requests. Vendors will be notified within 3 business days of when their requests were approved. However, DLA cannot guarantee that it can complete all validation requests by the due date for any solicitation responses