Inactive Total Small Business Set-Aside (FAR 19.5)

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6 of the Federal Acquisition Regulations (FAR), as supplemented with additional infor... This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6 of the Federal Acquisition Regulations (FAR), as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. This solicitation, SPE605-24-Q-0938, is issued as a Request for Quotation (RFQ) for commercial items using the Simplified Acquisition Procedures (SAP) in accordance with FAR Parts 12 and 13. The contract resulting from this procurement will be a firm fixed price contract. This document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2024-03 dated 23 February 2024. DPAS rating for potential award is DO. The clauses and provisions referenced in this solicitation may be reviewed/obtained in full text form at: https://www.acquisition.gov/browse/index/far https://www.acq.osd.mil/dpap/dars/dfarspgi/current/ THIS IS 100% SET ASIDE FOR SMALL BUSINESSES UNDER NAICS CODE 324110 Scope of Contract: CLIN 0001 – The contractor shall provide, under line item 0001: 1,100 USG of DIESEL FUEL (DS2) (NSN: 9140-015240139) delivered by Tank Truck w/ Pump (Truck to Truck Transfer) to: TINIAN INTERNATIONAL AIRPORT - Tinian International Airport North Field MP 99999 Required delivery date: MARCH 27th, 2024 Delivery will be f.o.b. destination. Delivery Mode Notes: Tank Truck with pump and meter Delivery Hours: 0600-1800 MONDAY - SATURDAY Delivery truck to truck at North Field, location: 15.080215, 145.639517 Truck Model: Seneca Tank "FuelMaster" Model SD36A, 3600 gallon, 1-compartment; Specs: Piping and Emergency Valve: 3" emergency valve with 3" piping to curbside to end in fabricated "T" with 4" flange for API installation above and 3" flange for suction piping below. Suction Line: 3" Permanent piping installed underneath the tank with the following connection to the pump Aluminum Hard Pipe with heavy duty Victaulic couplings Discharge Line: 2" Permanent piping installed underneath the tank with the following connection to the pump: Aluminum Hard Pipe with heavy duty Victaulic couplings Vendors ARE RESPONSIBLE FOR ENSURING ALL APPLICABLE TAXES AND FEES ARE INCLUDED IN THEIR Quoted PRICEs. DLA Energy may require a vendor to sign the SF1449 prior to being awarded this delivery. This will be sent by email and may have a response window of as little as two (2) hours. Upon request, the vendor must return the signed SF1449 by the deadline specified. If this is not returned by the specified deadline, DLA Energy reserves the right to offer this delivery to a different vendor. New Clause: FAR 52.204–27 Prohibition on a Bytedance Covered Application (June 2023) (a) Definitions. As used in this clause— Covered application means the social networking service TikTok or any successor application or service developed or provided by ByteDance Limited or an entity owned by ByteDance Limited. Information technology, as defined in 40 U.S.C. 11101(6)— (1) Means any equipment or interconnected system or subsystem of equipment, used in the automatic acquisition, storage, analysis, evaluation, manipulation, management, movement, control, display, switching, interchange, transmission, or reception of data or information by the executive agency, if the equipment is used by the executive agency directly or is used by a contractor under a contract with the executive agency that requires the use— (i) Of that equipment; or (ii) Of that equipment to a significant extent in the performance of a service or the furnishing of a product; (2) Includes computers, ancillary equipment (including imaging peripherals, input, output, and storage devices necessary for security and surveillance), peripheral equipment designed to be controlled by the central processing unit of a computer, software, firmware and similar procedures, services (including support services), and related resources; but (3) Does not include any equipment acquired by a Federal contractor incidental to a Federal contract. (b) Prohibition. Section 102 of Division R of the Consolidated Appropriations Act, 2023 (Pub. L. 117–328), the No TikTok on Government Devices Act, and its implementing guidance under Office of Management and Budget (OMB) Memorandum M–23–13, dated February 27, 2023, “No TikTok on Government Devices” Implementation Guidance, collectively prohibit the presence or use of a covered application on executive agency information technology, including certain equipment used by Federal contractors. The Contractor is prohibited from having or using a covered application on any information technology owned or managed by the Government, or on any information technology used or provided by the Contractor under this contract, including equipment provided by the Contractor's employees; however, this prohibition does not apply if the Contracting Officer provides written notification to the Contractor that an exception has been granted in accordance with OMB Memorandum M–23–13. (c) Subcontracts. The Contractor shall insert the substance of this clause, including this paragraph (c), in all subcontracts, including subcontracts for the acquisition of commercial products or commercial services. (End of clause) DLAD 4.703 Policy. (a) Contracting officers shall include procurement note C03 in solicitations and awards. ***** C03 Contractor Retention of Supply Chain Traceability Documentation (JUN 2020) (1) By submitting a quotation or offer, the contractor, if it is not the manufacturer of the item, is confirming it currently has, or will obtain before delivery, and shall retain documented evidence (supply chain traceability documentation), as described in paragraph (2) of this procurement note, demonstrating the item is from the approved manufacturer and conforms to the technical requirements. (2) At a minimum, the supply chain traceability documentation for the item shall include: basic item description, part number and/or national stock number, manufacturing source, manufacturing source’s Commercial and Government Entity (CAGE) code, and clear identification of the name and location of all supply chain intermediaries between the manufacturer to the contractor to item(s) acceptance by the Government. The documentation should also include, if available, the manufacturer's batch identification for the item(s), such as date codes, lot codes, or serial numbers. (3) Contractors can find examples of acceptable supply chain traceability documentation at the Counterfeit Detection and Avoidance Program (CDAP) Website ( http://www.dla.mil/LandandMaritime/Business/Selling/Counterfeit-Detection-Avoidance-Program/ ). (4) The contractor shall immediately make documentation available to the contracting officer upon request. The contracting officer determines the acceptability and sufficiency of documentation. The contractor shall retain supply chain traceability documentation for six years after final payment under this contract for audit and other valid government purposes. If the contractor fails to retain or provide the documentation, or the contracting officer finds the documentation to be unacceptable, the contracting officer may take corrective action, including, but not limited to, cancellation of undelivered orders or rejection of delivered supplies. DFARS 252.204-7024 Notice on the Use of the Supplier Performance Risk System. As prescribed in 204.7604, use the following provision: NOTICE ON THE USE OF THE SUPPLIER PERFORMANCE RISK SYSTEM (MAR 2023) (a) Definitions. As used in this provision— “Item risk” means the probability that a product, based on intended use, will introduce performance risk resulting in safety issues, mission degradation, or monetary loss. “Price risk” means a measure of whether a proposed price for a product or service is consistent with historical prices paid for that item or service. “Supplier risk” means the probability that an award may subject the procurement to the risk of unsuccessful performance or to supply chain risk (see Defense Federal Acquisition Regulation Supplement 239.7301). (b) The Supplier Performance Risk System (SPRS), available at https://piee.eb.mil/, will be used in the evaluation of the Quoter or Offeror’s performance. SPRS retrieves item, price, quality, delivery, and contractor information on contracts from Government reporting systems in order to develop risk assessments. (c) The Contracting Officer will consider SPRS risk assessments during the evaluation of quotations or offers received in response to this solicitation as follows: (1) Item risk will be considered to determine whether the procurement represents a high performance risk to the Government. (2) Price risk will be considered in determining if a proposed price is consistent with historical prices paid for a product or a service or otherwise creates a risk to the Government. (3) Supplier risk, including but not limited to quality and delivery, will be considered to assess the risk of unsuccessful performance and supply chain risk. (d) SPRS risk assessments are generated daily. Quoters or Offerors are able to access their risk assessments by following the access instructions in the SPRS user's guide available at https://www.sprs.csd.disa.mil/reference.htm. Quoters and Offerors are granted access to SPRS for their own risk assessment classifications only. SPRS reporting procedures and risk assessment methodology are detailed in the SPRS user's guide. The method to challenge a rating generated by SPRS is also provided in the user's guide. SPRS evaluation criteria are available at https://www.sprs.csd.disa.mil/pdf/SPRS_DataEvaluationCriteria.pdf. (e) The Contracting Officer may consider any other available and relevant information when evaluating a quotation or an offer. (End of provision) FAR 52.212-1 Instructions to Offerors—Commercial Products and Commercial Services. As prescribed in 12.301(b)(1), insert the following provision: Instructions to Offerors—Commercial Products and Commercial Services (Sep 2023) (a) North American Industry Classification System (NAICS) code and small business size standard. The NAICS code(s) and small business size standard(s) for this acquisition appear elsewhere in the solicitation. However, the small business size standard for a concern that submits an offer, other than on a construction or service acquisition, but proposes to furnish an end item that it did not itself manufacture, process, or produce is 500 employees, or 150 employees for information technology value-added resellers under NAICS code 541519, if the acquisition— (1)Is set aside for small business and has a value above the simplified acquisition threshold; (2)Uses the HUBZone price evaluation preference regardless of dollar value, unless the offeror waives the price evaluation preference; or (3)Is an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award regardless of dollar value. (b) Submission of offers. Submit signed and dated offers to the office specified in this solicitation at or before the exact time specified in this solicitation. Offers may be submitted on the SF 1449, letterhead stationery, or as otherwise specified in the solicitation. As a minimum, offers must show— (1) The solicitation number; (2) The time specified in the solicitation for receipt of offers; (3) The name, address, and telephone number of the offeror; (4) A technical description of the items being offered in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary; (5) Terms of any express warranty; (6) Price and any discount terms; (7) "Remit to" address, if different than mailing address; (8) A completed copy of the representations and certifications at Federal Acquisition Regulation (FAR) 52.212-3 (see FAR 52.212-3(b) for those representations and certifications that the offeror shall complete electronically); (9) Acknowledgment of Solicitation Amendments; (10) Past performance information, when included as an evaluation factor, to include recent and relevant contracts for the same or similar items and other references (including contract numbers, points of contact with telephone numbers and other relevant information); and (11) If the offer is not submitted on the SF 1449, include a statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation. Offers that fail to furnish required representations or information, or reject the terms and conditions of the solicitation may be excluded from consideration. (c) Period for acceptance of offers. The offeror agrees to hold the prices in its offer firm for 30 calendar days from the date specified for receipt of offers, unless another time period is specified in an addendum to the solicitation. (d) Product samples. When required by the solicitation, product samples shall be submitted at or prior to the time specified for receipt of offers. Unless otherwise specified in this solicitation, these samples shall be submitted at no expense to the Government, and returned at the sender’s request and expense, unless they are destroyed during preaward testing. (e) Multiple offers. Offerors are encouraged to submit multiple offers presenting alternative terms and conditions, including alternative line items (provided that the alternative line items are consistent with FAR subpart 4.10), or alternative commercial products or commercial services for satisfying the requirements of this solicitation. Each offer submitted will be evaluated separately. (f) Late submissions, modifications, revisions, and withdrawals of offers. (1) Offerors are responsible for submitting offers, and any modifications, revisions, or withdrawals, so as to reach the Government office designated in the solicitation by the time specified in the solicitation. If no time is specified in the solicitation, the time for receipt is 4:30 p.m., local time, for the designated Government office on the date that offers or revisions are due. (2) (i) Any offer, modification, revision, or withdrawal of an offer received at the Government office designated in the solicitation after the exact time specified for receipt of offers is "late" and will not be considered unless it is received before award is made, the Contracting Officer determines that accepting the late offer would not unduly delay the acquisition; and- (A) If it was transmitted through an electronic commerce method authorized by the solicitation, it was received at the initial point of entry to the Government infrastructure not later than 5:00 p.m. one working day prior to the date specified for receipt of offers; or (B) There is acceptable evidence to establish that it was received at the Government installation designated for receipt of offers and was under the Government’s control prior to the time set for receipt of offers; or (C) If this solicitation is a request for proposals, it was the only proposal received. (ii) However, a late modification of an otherwise successful offer, that makes its terms more favorable to the Government, will be considered at any time it is received and may be accepted. (3) Acceptable evidence to establish the time of receipt at the Government installation includes the time/date stamp of that installation on the offer wrapper, other documentary evidence of receipt maintained by the installation, or oral testimony or statements of Government personnel. (4) If an emergency or unanticipated event interrupts normal Government processes so that offers cannot be received at the Government office designated for receipt of offers by the exact time specified in the solicitation, and urgent Government requirements preclude amendment of the solicitation or other notice of an extension of the closing date, the time specified for receipt of offers will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume. (5) Offers may be withdrawn by written notice received at any time before the exact time set for receipt of offers. Oral offers in response to oral solicitations may be withdrawn orally. If the solicitation authorizes facsimile offers, offers may be withdrawn via facsimile received at any time before the exact time set for receipt of offers, subject to the conditions specified in the solicitation concerning facsimile offers. An offer may be withdrawn in person by an offeror or its authorized representative if, before the exact time set for receipt of offers, the identity of the person requesting withdrawal is established and the person signs a receipt for the offer. (g) Contract award (not applicable to Invitation for Bids). The Government intends to evaluate offers and award a contract without discussions with offerors. Therefore, the offeror’s initial offer should contain the offeror’s best terms from a price and technical standpoint. However, the Government reserves the right to conduct discussions if later determined by the Contracting Officer to be necessary. The Government may reject any or all offers if such action is in the public interest; accept other than the lowest offer; and waive informalities and minor irregularities in offers received. (h) Multiple awards. The Government may accept any item or group of items of an offer, unless the offeror qualifies the offer by specific limitations. Unless otherwise provided in the Schedule, offers may not be submitted for quantities less than those specified. The Government reserves the right to make an award on any item for a quantity less than the quantity offered, at the unit prices offered, unless the offeror specifies otherwise in the offer. (i) Availability of requirements documents cited in the solicitation. (1) (i) The GSA Index of Federal Specifications, Standards and Commercial Item Descriptions, FPMR Part 101–29, and copies of Federal specifications, standards, and product descriptions can be downloaded from the ASSIST website at https://assist.dla.mil. (ii) If the General Services Administration, Department of Agriculture, or Department of Veterans Affairs issued this solicitation, a copy of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained from the address in paragraph (i)(1)(i) of this provision. (2) Most unclassified Defense specifications and standards may be downloaded from the ASSIST website at https://assist.dla.mil. (3) Defense documents not available from the ASSIST website may be requested from the Defense Standardization Program Office by— (i) Using the ASSIST feedback module ( https://assist.dla.mil/feedback); or (ii) Contacting the Defense Standardization Program Office by telephone at 571–767–6688 or email at assisthelp@dla.mil. (4) Nongovernment (voluntary) standards must be obtained from the organization responsible for their preparation, publication, or maintenance. (j) Unique entity identifier.(Applies to all offers that exceed the micro-purchase threshold, and offers at or below the micro-purchase threshold if the solicitation requires the Contractor to be registered in the System for Award Management (SAM).) The Offeror shall enter, in the block with its name and address on the cover page of its offer, the annotation "Unique Entity Identifier" followed by the unique entity identifier that identifies the Offeror's name and address. The Offeror also shall enter its Electronic Funds Transfer (EFT) indicator, if applicable. The EFT indicator is a four-character suffix to the unique entity identifier. The suffix is assigned at the discretion of the Offeror to establish additional SAM records for identifying alternative EFT accounts (see FAR subpart 32.11) for the same entity. If the Offeror does not have a unique entity identifier, it should contact the entity designated at www.sam.gov for unique entity identifier establishment directly to obtain one. The Offeror should indicate that it is an offeror for a Government contract when contacting the entity designated at www.sam.gov for establishing the unique entity identifier. (k) [Reserved] (l) Debriefing. If a post-award debriefing is given to requesting offerors, the Government shall disclose the following information, if applicable: (1) The agency’s evaluation of the significant weak or deficient factors in the debriefed offeror’s offer. (2) The overall evaluated cost or price and technical rating of the successful and the debriefed offeror and past performance information on the debriefed offeror. (3) The overall ranking of all offerors, when any ranking was developed by the agency during source selection. (4) A summary of the rationale for award; (5) For acquisitions of commercial products, the make and model of the product to be delivered by the successful offeror. (6) Reasonable responses to relevant questions posed by the debriefed offeror as to whether source-selection procedures set forth in the solicitation, applicable regulations, and other applicable authorities were followed by the agency. (End of provision) Electronic Funds Transfer as a means of payment will be made upon receipt and acceptance of all products through Wide Area Work Flow (WAWF). FAR 52.212-1, Instructions to Offerors Commercial Items applies to this acquisition. FAR 52.212-2 Evaluation of Commercial Items applies to this acquisition. The evaluation criteria stated in paragraph (a) of FAR 52.212-2 are as follows: The contract will be awarded to the lowest price quotation from a responsible vendor. Vendors shall include a completed copy of FAR 52.212-3 Offeror Representations and Certifications Commercial Items (ALT I) with its quotation. A printout from sam.gov is acceptable. FAR 52.212-4, Contract Terms and Conditions Commercial Items applies to this acquisition. FAR 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders – Commercial Items applies to this acquisition. In paragraph (b) of FAR 52.212-5, the following apply: FAR 52.209-6, 52.219-6, 52.219-28, 52.222-3, 52.222-19, 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-50, 52.223-18, 52.225-13, and 52.232-34. The following additional clauses apply to this acquisition: FAR 52.204-7, 52.204-13, 52.204-18, 52.204?21, 52.211-16 with a 10% variance above or below, 52.211?17, and 52.247-34. Defense Federal Acquisition Regulation Supplement (DFARS) 252.203-7000, 252.204-7015, 252.225-7012, 252.225?7021, 252.229-7000, 252.229-7001, 252.232-7003, 252.232-7006, 252.233-7001, and 252.247-7023. ENERGY Quality Assurance Provision C16.69-11 (DIESEL FUEL (DS2) DEC 2016) also applies. (See attached) Quotations are due NLT 10:00 AM Ft. Belvoir Time Wednesday, March 20th, 2024. Send questions to the Contract Specialist, Brian Hobbs at Brian.Hobbs@dla.mil. Email quotations to the contract specialist and DLAEnergyFEPAA@dla.mil no later than RFQ due date/time.