Inactive

This agency proposes to issue solicitation SPE4A6-21-R-0132 for an Indefinite Quantity Contract (IQC) one year renewal Long Term Contract initiative which includes the following NSN: CLIN 0001 –5342-0... This agency proposes to issue solicitation SPE4A6-21-R-0132 for an Indefinite Quantity Contract (IQC) one year renewal Long Term Contract initiative which includes the following NSN: CLIN 0001 –5342-01-586-5291 – EXN, LOS ANGELES CLASS SSN (688), ANODE, CORROSION, PREVENTIVE One NSN is targeted for this LTC initiative for solicitation SPE4A6-21-R-0132. It is anticipated that the following source will be requested for pricing for the initial contract from the Qualified Products List 24779 with approved source cited below: BASIC SPEC MIL-DTL-24779D, REV NR D, DTD 3/16/2015, PART PIECE NUMBER-MIL-DTL-24779B, TYPE LSS-7 BAC CORROSION CONTROLS, CAGE R2020 The proposed action is intended to be awarded as an Unrestricted, Other Than Full & Open Competition acquisition. The award effort for this acquisition is a Long Term Contract (LTC) initiative as validated during market research for this NSN. The proposed contract will be awarded for a total of five year of performance inclusive of a base year and four option periods.. Letters expressing interest in subcontracting provided to the contracting officer will be forwarded to the identified OEM. This solicitation is proposed to be IAW FAR PART 15 for a non-commercial item. The NSN cited above has been identified for this current action for the initial effort. This will be a sole source awarded contract based on the applicable part number referenced above for this NSN. Best value selection methods will be used for this requirement. The Government will award a single award contract for this action. The solicitation will be posted on Federal Business Opportunity (FBO) by 12/07/2020. The issue date will be 12/07/2020 and the closing date is 01/06/2021. The item is identified with Federal Supply Class of 5342, NAICS- 332722 – Bolt, Nut, Screw, Rivet, and Washer The solicitation will include the following terms and conditions: FOB Origin/Inspection & Acceptance @ Destination Standard Inspection Non-commercial No surge requirement Pricing will be requested for the Estimated Annual Demand (EAD) quantity of 320 each Requested Delivery Schedule – 153 Days ARO This agency proposes to issue solicitation SPE4A6-21-R-0132 for an Indefinite Quantity Contract (IQC) one year renewal Long Term Contract initiative which includes the following NSN: CLIN 0001 –5342-01-586-5291 – EXN, LOS ANGELES CLASS SSN (688), ANODE, CORROSION, PREVENTIVE One NSN is targeted for this LTC initiative for solicitation SPE4A6-21-R-0132. It is anticipated that the following source will be requested for pricing for the initial contract from the Qualified Products List 24779 with approved source cited below: BASIC SPEC MIL-DTL-24779D, REV NR D, DTD 3/16/2015, PART PIECE NUMBER-MIL-DTL-24779B, TYPE LSS-7 BAC CORROSION CONTROLS, CAGE R2020 The proposed action is intended to be awarded as an Unrestricted, Other Than Full & Open Competition acquisition. The award effort for this acquisition is a Long Term Contract (LTC) initiative as validated during market research for this NSN. The proposed contract will be awarded for a total of five year of performance inclusive of a base year and four option periods.. Letters expressing interest in subcontracting provided to the contracting officer will be forwarded to the identified OEM. This solicitation is proposed to be IAW FAR PART 15 for a non-commercial item. The NSN cited above has been identified for this current action for the initial effort. This will be a sole source awarded contract based on the applicable part number referenced above for this NSN. Best value selection methods will be used for this requirement. The Government will award a single award contract for this action. The solicitation will be posted on Federal Business Opportunity (FBO) by 12/07/2020. The issue date will be 12/07/2020 and the closing date is 01/06/2021. The item is identified with Federal Supply Class of 5342, NAICS- 332722 – Bolt, Nut, Screw, Rivet, and Washer The solicitation will include the following terms and conditions: FOB Origin/Inspection & Acceptance @ Destination Standard Inspection Non-commercial No surge requirement Pricing will be requested for the Estimated Annual Demand (EAD) quantity of 320 each Requested Delivery Schedule – 153 Days ARO

Inactive

The DLA AVIATION-RICHMOND is issuing this sources sought synopsis as a means of conducting market research to identify parties having an interest in and the resources to support this requirement for t... The DLA AVIATION-RICHMOND is issuing this sources sought synopsis as a means of conducting market research to identify parties having an interest in and the resources to support this requirement for the following National Stock number 5342-01-586-5291 for ANODE, CORROSION PREVENTIVE IAW Qualified Products LIST (QPL) cited below: QPL 24779, SPEC NUMBER MIL DTC-24779D, REV D, DTD 3/16/2015M PART PIECE NUMBER 24779B, TYPE LSS-7 EAD QTY 320, DELIVERY – 153 DARO The result of this market research will contribute to determining the method of procurement. The applicable North American Industry Classification System (NAICS) code assigned to this procurement is 332722. THERE IS NO SOLICITATION AT THIS TIME. This request for capability information does not constitute a request for proposals; submission of any information in response to this market survey is purely voluntary; the government assumes no financial responsibility for any costs incurred. If your organization has the potential capacity to perform these contract services, please provide the following information: 1) Organization name, address, email address, Web site address, telephone number, and size and type of ownership for the organization; and 2) Tailored capability statements addressing the particulars of this effort, with appropriate documentation supporting claims of organizational and staff capability. If significant subcontracting or teaming is anticipated in order to deliver technical capability, organizations should address the administrative and management structure of such arrangements. [Note: In accordance with FAR 10.001(b), agencies should not request potential sources to submit more than the minimum information necessary.] The government will evaluate market information to ascertain potential market capacity to 1) provide services consistent in scope and scale with those described in this notice and otherwise anticipated; 2) secure and apply the full range of corporate financial, human capital, and technical resources required to successfully perform similar requirements; 3) implement a successful project management plan that includes: compliance with tight program schedules; cost containment; meeting and tracking performance; hiring and retention of key personnel and risk mitigation; and 4) provide services under a performance based service acquisition contract. BASED ON THE RESPONSES TO THIS SOURCES SOUGHT NOTICE/MARKET RESEARCH, THIS REQUIREMENT WILL BE SET-ASIDE FOR UNRESTRICTED OR PROCURED THROUGH OTHER THAN FULL AND OPEN COMPETITION, and multiple awards MAY be made. Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding their submissions. Submission Instructions: Interested parties who consider themselves qualified to perform the above-listed services are invited to submit a response to this Sources Sought Notice by 11/16/2020, 4:00 P.M. Eastern Standard Time. All responses under this Sources Sought Notice must be emailed to lacountess.coleman@dla.mil. If you have any questions concerning this opportunity please contact: L. Dawn Coleman at 804-279-5922. APPENDIX 1: Purpose and Objectives Potential sources shall be capable of furnishing all labor, materials, facilities and equipment required to accomplish the new manufacture of the item(s). Generally, this entails the procurement/manufacture of component parts, inspection, testing, preservation/packaging, and shipping. Additionally, potential sources may be responsible for supply chain management, logistics planning, forecasting production requirements, long-lead time parts procurement, diminishing manufacturing sources and material shortage issues, and shipping serviceable assets. The unit prices will be established at the time of a contract award. The specific requirement for this effort is cited below. This acquisition is for a 5 year requirement to include a base year and four option periods. Refer to approved source(s), EAD QTY. QPL Number and Delivery Schedule cited on page 1 . Technical Orders and Qualification Requirements are not available.