Inactive

This acquisition is for the manufacture and delivery of 1,800 each “Vest, Survival – Primary Survival Gear Carrier (PSGC).” The National Stock Number (NSN) is 8415-01-620-3378. The PRIMARY SURVIVAL GE... This acquisition is for the manufacture and delivery of 1,800 each “Vest, Survival – Primary Survival Gear Carrier (PSGC).” The National Stock Number (NSN) is 8415-01-620-3378. The PRIMARY SURVIVAL GEAR CARRIER shall be made IAW PD1006005 REV D. dated 10 April 2017 and the following: PD1006006 Rev H PD for Ancillary Parts FINAL PD1006008 Rev F Tether PD for QRET and PRTS_17SEP2021 1051091- X5 SNAP HOOK AND 1051080- ADAPTER 1051019B LABELS, IDENTIFICATION 1051016- LEG STRAP 1051000- SEPARABLE ZIP 1050999- LH LOWER TORSO 1050998- UPPER TORSO 1050997- LH VEST 1050996- ATTACHMENT STRAP 1050995- RH LOWER 1050994- MIDDLE TORSO 1050993- LEG & SHOULDER 1050992- LIFTING STRAP 1050991- TACTILE BEAD 1050990- CENTER FRONT ZIP 1050989- RH VEST 1050988- RETAIN LOOP 1050987- BACK VEST H 1050986- ZIPPER WITH SLIDER 1050985- L_R POCKET 1050984- STRAP END 1050983- Y1 BUCKLE 1050982A LEG STRAP 1050979A PSGC CUT PARTS 1050978B PSGC ASSY 1050959- CLOTH, NYLON 1050955B COMPONENT MATERIALS AND COLORS 1050946A COMBO POUCH 1006033- SAFETY RESTRAINT TETHER (SRT) 1006032- EXTRACTION STRAP 1006031- ADAPTER PLATFORM 1006030- RADIO POUCH 1006029- MAG POUCH M-4 1006028- UTILITY POUCH 1006027A MULTI-PURPOSE POUCH 1006026- RETENTION LOOP 1006025- SMALL SQUARE POUCH 1006022- BLOWER POUCH 1006021- VEST HARNESS 1005974C CARABINER 1005938B ESD Test 1005933C RING NO. 2 1005835L SHEET FOAM 1005833K QR ADJUSTABLE BUCKLE 1005832C LOOP AIR WARRIOR PRIMARY SURVIVAL GEAR CARRIER, PSGC ASSEMBLY, GEN 3 P/N 1050978-1 The solicitation number is SPE1C1-23-R-TBD1. The Government intends to make one (1) award based on the Lowest Price/Technically Acceptable proposal; past performance will not be considered for evaluations. This acquisition will be issued on a 100% Small Business Set-Aside. The estimated release date of the solicitation is July 7, 2023. The production-lead time (PLT) is as follows: 180 for First Article Test (FAT) submission, 30 days for the Government’s review/approval/disapproval of FAT, 120 days for first production lot, at a rate of 200 each per month. First Article Testing (FAT) is required. First Article Testing (FAT) will be conducted at the contractor’s facility. First Article Test (FAT): Three (3) complete Assembly samples shall be submitted for first article inspection IAW PD1006005D dated 10 April 2017 Paragraph 4.1.1 and Table II. All deliveries will be to the DLA Depots in Lansing, MI, Pendergrass, GA and Austin, TX. All material shall be contractor furnished. Deliveries are FOB Destination. Inspection and Acceptance at Origin Availability of solicitations, FAR 5.102(d) applies, as our office no longer issues solicitations or amendments in paper form. Solicitation will be posted on https://www.dibbs.bsm.dla.mil/ Detailed system requirements and instructions for registration can be found on the DLA DIBBS Home Page accessed on https://www.dibbs.bsm.dla.mil/. A few highlights of the information that will be found include: 1. On the DLA Internet Bulletin Board System (DIBBS) Home Page, click the VENDOR REGISTRATION link to begin the registration process. 2. In order to register for access to secure portions of DLA DIBBS, the company you are representing must already be registered in the System for Award Management (SAM). 3. A Commercial and Government Entity (CAGE) Code registration will be processed within five business days. A User ID will appear on the registration screen and a password will be sent separately to the email address of the Super User. If a CAGE is already registered on DLA DIBBS, the name and email address of the Super User will be provided. The Super User should be contacted to set-up additional accounts, logons and passwords for their CAGE. DIBBS Super User * If your CAGE has already been registered on DIBBS, the name and email address of the person designated as your super user will be provided. * The representative who starts the DIBBS registration process has the option to accept their SAM registration POC as the DIBBS super user, or they can designate themselves or another person to act as the super user for the CAGE. * The super user acts as the account administrator for a CAGE. They can add up to ninety-eight (98) additional users, provide user IDs and passwords, modify existing users, and control the login status of each user for their CAGEs through My Account (Account Maintenance). DLA Troop Support has developed a web-based system that allows manufacturers the ability to request specifications, patterns and drawings on our contracting page. To request technical data for DLA Troop Support Clothing and Textiles solicitations, use the following link to the DLA Troop Support C&T Technical Data Repository area at: http://www.dla.mil/TroopSupport/ClothingandTextiles/SpecRequest.aspx