Inactive

10/30/2020 - This posting amends the original synopsis posted on 10/20/2020 and the amended version posted on 10/27/2020. This amendment updates the technica requirements to the following: Disposable ... 10/30/2020 - This posting amends the original synopsis posted on 10/20/2020 and the amended version posted on 10/27/2020. This amendment updates the technica requirements to the following: Disposable Protective Coveralls Salient Characteristics – The disposable protective coveralls are Personal Protective Equipment (PPE) meeting Occupational Safety and Health Administration (OSHA) Technical Manual, Section VIII; Chapter 1, Section C, Table VIII: 1-1 Environmental Protection Agency (EPA) Levels of Protection C and AATCC 127 protection. The intended users of the disposable protective coveralls are test administrators, test analyzers, laboratory technicians, patient care providers and other personnel in high risk environments. The following description of the Disposable Protective Coveralls is as follows: Color White Sizes Small/Medium, Large, X-Large, 2X-Large and 3X-Large One Piece Coveralls with Hood Skid Resistant Sock/Boot is required. Sock/Boot does not have to be attached to One Piece Coveralls with Hood. Front placed Single Zipper for donning and doffing of Coverall. A flap for carrier protection over the zipper; storm flap is required. Ends of the Coveralls’ shall have elastic or other cinching material within the garment to close around the wearer’s wrists and ankles. Barrier Protection fabric shall pass a minimum AATCC 42<1g and AATCC 127 > 50 cm H20 or EN 20811 > 50 cm H20