Inactive

The Envelope Press needs to meet the following specifications: Sheet Size: Maximum 12? x 18? Minimum 3 1/4? x 4 1/4? Printing Area: Maximum 9? x 12? Minimum 3 1/4? x 4 1/4? Perfecting Area: Four sided... The Envelope Press needs to meet the following specifications: Sheet Size: Maximum 12? x 18? Minimum 3 1/4? x 4 1/4? Printing Area: Maximum 9? x 12? Minimum 3 1/4? x 4 1/4? Perfecting Area: Four sided bleed, both sides, up to and including: 4 1/4? x 12? (108mm x 305mm) Speeds: Minimum size 3 1/4? x 4 1/4? (82mm x 108mm) up to 4 1/2? x 12? (114mm x 305mm) One side only: 30,000 eph (1 UP) 60,000 eph (2 UP) Perfecting: 30,000 eph (1 UP) Plate Size: 9 15/16? x 12 1/4? x .008? (252mm x 311mm x 0.2mm) Blanket Specifications: .037? (0.94mm) thickness including adhesive back. Plate Cylinder Movement: Circumferential: 360° Lateral: ± 1/8? (3mm) Plate Skewing Capacity: ± 1/2'” (12mm) Delivery Table: Length: 6? (1829mm) Width: 12? (305mm) Counter: To ensure correct number of envelopes. Plate Bender The plate bender "rolls" or bend’s the plates to go onto the plate cylinder. Without this the set up of the machine would not be possible. Cams and Rails The cams and rails if the device will accommodate other size envelopes from the standard size #10’s and #9’s.