Inactive Total Small Business Set-Aside (FAR 19.5)

AMENDMENT 0001 - Delivery addresse updated for APO locations The US Army Contracting Command-Redstone Services & IT Solution Branch, has a requirement to procure seventy-three (73) Torque System items... AMENDMENT 0001 - Delivery addresse updated for APO locations The US Army Contracting Command-Redstone Services & IT Solution Branch, has a requirement to procure seventy-three (73) Torque System items that will be used with existing fielding, procedures, and logistical support.. This solicitation, PANRSA-25-P-0000-015019, is issued as a Request for Quote (RFQ). =========================================== CONTRACT TYPE: Firm-Fixed-Price (FFP) SET-ASIDE: Small Business Set Aside RFQ INSTRUCTIONS AND EVALUATION CRITERIA: In accordance with the PRODUCT DESCRIPTION below, a submission of a FFP quote for the item(s) listed in is hereby requested. The U.S. Government (USG) reserves the right to make award based on initial quotes received, without discussions with vendors; therefore, the initial quote should contain the vendor's best terms. =========================================== PRODUCT DESCRIPTION: The Torque System module shall include the following specifications or equivalent (if not brand name): CDI Transducer Kit 1/4” Dr 5-50 in-oz, model# 2000-4-02 Qty: 23 CDI Transducer Kit 1/4” Dr 15-200 in-oz, model# 2000-5-02 Qty: 23 CDI Motorized Muli test Torque Calibration System, model# 2800-3 Qty: 23 CDI Complete Transducer Calibration Kit - 2000 cal kit. Qty: 4 =========================================== Delivery Address: Please see the attached list of locations/addresses - All APO locations shall be shipped to: 5435 Fowler Road Redstone Arsenal, AL 35898 =========================================== A complete quote shall consist of the following: 1. All items, including brand name items, as specified in the PRODUCT DESCRIPTION section as well as the quantities specified. 2. Delivery terms and conditions. 3. Unit price and subtotal price for each item listed in the PRODUCT DESCRIPTION section and a total price for all items. 4. Identification of any discounts and/or reductions to established rates or prices. 5. Full company name. 6. Identify business size 7. Identify Socio-economic status, if applicable. 8. Include Point of Contacts (POCs): name, position, office and mobile telephone numbers and email address. 9. Cage Code 10.Unique Entity Identifier (UEI) 11.GSA Schedule/Contract Number, if applicable ================================================= The response date for this RFQ is September 3, 2025 @ 3:30pm CDT. Any quotes received after the required submission date and time will be rejected without further review. No phone calls will be accepted. Questions may be submitted, but any submitted after the said date and time listed on this RFQ posting are not guaranteed an answer. Quotes may be submitted via email to the following POCs: Latoya Whitsett, Contract Specialist, at latoya.t.whitsett.civ@army.mil and Shalanda McMurry, Contracting Officer, at shalanda.r.mcmurry.civ@army.mil ================================================= It is the vendor’s responsibility to read the RFQ and any/all related documents carefully and completely and to monitor for any updates to the RFQ on a regular basis. Additionally, it is the vendor’s responsibility to ensure/verify the Government receives its submission on or before the date/time specified. ================================================= BASIS OF AWARD: Award will be made on the basis of best value, evaluating price, technical capability and warranty. Technically capability means a quote which provides all required specifications detailed in the Product Description as well as demonstrating capability to fulfill the requirement. The minimum technical requirements are as follows: All items quoted are as specified in the purchase description, including brand name items. Delivery shall be within 30 days after receipt of order or sooner. ================================================= Adjectival Rating Description Acceptable Quote meets the requirements of the RFQ/solicitation, including the minimum technical requirements. Unacceptable Quote does not meet the requirements of the solicitation, including the minimum technical requirements. Unacceptable Quote does not meet the requirements of the RFQ/solicitation, including the minimum technical requirements.

Inactive

THIS IS A REQUEST FOR INFORMATION (RFI) ONLY – This RFI is issued solely for information and planning purposes – it does not constitute a Request for Quote (RFQ) or a promise to issue a RFQ in the fut... THIS IS A REQUEST FOR INFORMATION (RFI) ONLY – This RFI is issued solely for information and planning purposes – it does not constitute a Request for Quote (RFQ) or a promise to issue a RFQ in the future. Solicitations are not available at this time and therefore any request for a solicitation will not receive a response. This notice does not constitute a commitment by the United States Government (USG) to contract for any supply or service whatsoever. All information submitted in response to this announcement is voluntary; the USG will not pay for information requested nor will it compensate any respondent for any cost incurred in developing information provided to the USG. Not responding to this RFI does not preclude participation in any future RFQ, if any is issued. If a solicitation is released, it will be synopsized on SAM.GOV. It is the responsibility of the potential offerors to monitor this site for additional information pertaining to this requirement. ----------------------------------------------------------------------------------- The US Army Contracting Command-Redstone Services & IT Solution Branch, plans to obtain information to serve as market research to help identify potential sources that can provide seventy-nine (79) Torque System items that will be used with existing fielding, procedures, and logistical support. The equipment shall be delivered to Enterprise Support Directive (ESD), located at Building 5435, Fowler Road Redstone Arsenal. The Torque System module shall include the following specifications or equivalent (if not brand name): CDI Transducer Kit 1/4” Dr 5-50 in-oz, model# 2000-4-02 - (Qty: 25) CDI Transducer Kit 1/4” Dr 15-200 in-oz, model# 2000-5-02 - (Qty: 25) CDI Motorized Muli test Torque Calibration System, model# 2800-3 - (Qty: 25) CDI Complete Transducer Calibration Kit - 2000 cal kit. - (Qty: 4) ----------------------------------------------------------------------------------- Delivery Locations: Redstone Arsenal, AL Fort Sill, OK Corpus Christi Army Depot (CCAD), TX TSC Illesheim (Germany) TSC Vilseck (Germany) TSC Aberdeen, MD Fort Bliss, TX Fort Carson, CO Fort Drum, NY Fort Eisenhower (Gordon), GA Fort Irwin, CA Fort Riley, KS Fort Liberty (Bragg), NC Hunter Army Airfield (HAAF), GA Joint Base Lewis McChord (JBLM), WA TSC Dugway, UT TSC McAlester, OK TSC Red River, TX TSC Rock Island, IL TSC Tobyhanna, PA TSC White Sands Missile Range (WSMR), NM TSC Camp Humphreys (S. Korea) TSC Hawaii, HI TSC Japan (Sagami Depot) TSC Wainwright, AK ----------------------------------------------------------------------------------- Interested parties are requested to respond to this RFI with the following: 1. Full company name. 2. Identify business size 3. Identify Socio-economic status as applicable. 4. Include Point of Contacts (POCs): name, position, office and mobile telephone numbers and email address. 5. Cage Code 6. Unique Entity Identifier (UEI) 7.GSA contract/schedule number, if applicable ----------------------------------------------------------------------------------- The response date for this market research is July 25, 2025. No phone calls will be accepted. All responses to this RFI may be submitted via e-mail to the following POCs: Samantha Shirley, Contract Specialist, at samantha.c.shirley.civ@army.mil and Shalanda McMurry, Contracting Officer, at shalanda.r.mcmurry.civ@army.mil.