Inactive Total Small Business Set-Aside (FAR 19.5)

The U.S. Army Contracting Command-Redstone Services & IT Solution Branch, has a requirement to procure (1) Model 373H Dew Point Mirror along with an ISO calibration or equivalent for the Army’s Primar... The U.S. Army Contracting Command-Redstone Services & IT Solution Branch, has a requirement to procure (1) Model 373H Dew Point Mirror along with an ISO calibration or equivalent for the Army’s Primary Standards Laboratory (APSL). This solicitation, PANRSA-25-P-0000-011936, is issued as a Request for Quote (RFQ). CONTRACT TYPE: Firm-Fixed-Price (FFP) SET-ASIDE: Small Business Set Aside RFQ INSTRUCTIONS AND EVALUATION CRITERIA: In accordance with the PRODUCT DESCRIPTION below, a submission of a FFP quote for the item(s) listed in is hereby requested. The U.S. Government (USG) reserves the right to make award based on initial quotes received, without discussions with vendors; therefore, the initial quote should contain the vendor's best terms. ------------------------------------------------------------------------- PRODUCT DESCRIPTION: The PXA Signal Analyzer module shall include the following specifications or equivalent (if not brand name): N9030B PXA Signal Analyzer 1 N9030B-550 Frequency Range, 2 Hz to 50 GHz N9030B-P50 Preamplifier, 50 GHz N9030B-B2X Analysis bandwidth, 255 MHz N9030B-LNP Low noise path N9030B-MPB Microwave preselector bypass N9030B-EP0 Enhanced phase noise, DDS LO N9030B-FBP Full Bypass Path N9030B-107 Audio input and digitizer N9091EM0E Measuring Receiver Application 12 months, Node-locked Node-locked perpetual license R-50C-017-3-D Accredited Calibration - Return-to Keysight - 3 years N9030B-YAV Screen video, log video and linear video N9063EM0E Analog Demodulation Measurement Application ------------------------------------------------------------------------- Delivery Location/Address: Army Physical Standards Labs, Building 5435, Redstone Arsenal, AL 35898 ------------------------------------------------------------------------- A complete quote shall consist of the following: 1. All items, including brand name items, as specified in the PRODUCT DESCRIPTION section as well as the quantities specified. 2. Delivery terms and conditions. 3. Unit price and subtotal price for each item listed in the PRODUCT DESCRIPTION section and a total price for all items. 4. Identification of any discounts and/or reductions to established rates or prices. 5. Full company name. 6. Identify business size 7. Identify Socio-economic status, if applicable. 8. Include Point of Contacts (POCs): name, position, office and mobile telephone numbers and email address. 9. Cage Code 10.Unique Entity Identifier (UEI) 11.GSA Schedule/Contract Number, if applicable ------------------------------------------------------------------------- The response date for this RFQ is August 15, 2025 @ 3:30pm CDT. Any quotes received after the required submission date and time will be rejected without further review. No phone calls will be accepted. Questions may be submitted, but any submitted after the said date and time listed on this RFQ posting are not guaranteed an answer. Quotes may be submitted via email to the following POCs: Shalanda McMurry, Contracting Officer, at shalanda.r.mcmurry.civ@army.mil & Contract Specialist: Ben Hymas at Benjamin.c.hymas.civ@army.mil. ------------------------------------------------------------------------- It is the vendor’s responsibility to read the RFQ and any/all related documents carefully and completely and to monitor for any updates to the RFQ on a regular basis. Additionally, it is the vendor’s responsibility to ensure/verify the Government receives its submission on or before the date/time specified. ------------------------------------------------------------------------- BASIS OF AWARD: Award will be made on the basis of best value, evaluating price and technical capability. Technically capability means a quote which provides all required specifications detailed in the Product Description as well as demonstrating capability to fulfill the requirement. The minimum technical requirements are as follows: All items quoted are as specified in the product description, including brand name items. Delivery shall be within 60 days after receipt of order or sooner. ------------------------------------------------------------------------- Adjectival Rating Description Acceptable Quote meets the requirements of the RFQ/solicitation, including the minimum technical requirements. Unacceptable Quote does not meet the requirements of the solicitation, including the minimum technical requirements. Unacceptable Quote does not meet the requirements of the RFQ/solicitation, including the minimum technical requirements.

Inactive

THIS IS A REQUEST FOR INFORMATION (RFI) ONLY – This RFI is issued solely for information and planning purposes – it does not constitute a Request for Quote (RFQ) or a promise to issue an RFQ in the fu... THIS IS A REQUEST FOR INFORMATION (RFI) ONLY – This RFI is issued solely for information and planning purposes – it does not constitute a Request for Quote (RFQ) or a promise to issue an RFQ in the future. Solicitations are not available at this time. Requests for a solicitation will not receive a response. This notice does not constitute a commitment by the United States Government (USG) to contract for any supply or service whatsoever. All information submitted in response to this announcement is voluntary; the USG will not pay for information requested nor will it compensate any respondent for any cost incurred in developing information provided to the USG. Not responding to this RFI does not preclude participation in any future RFQ, if any is issued. If a solicitation is released, it will be synopsized on SAM.GOV. It is the responsibility of the potential offerors to monitor this site for additional information pertaining to this requirement. ------------------------------------------------------------------------------------------------------------------ The US Army Contracting Command-Redstone Services & IT Solution Branch, plans to obtain information to serve as market research to help identify potential sources that can provide one (1) Model N9030B PXA Signal Analyzer with options which will be replacing the Model E4448A PSA Spectrum Analyzer that has been discounted and is no longer supported by the manufacturer. The N9030B will support the Power Sensor Calibration Systems and the Spectrum Analyzer Calibration Systems (PSCS/SACS) that support the Army’s inventory of power sensors and spectrum analyzers as well as Airforce, Marine, and Navy customers. The equipment shall be delivered to USATA’s Army Primary Standards Laboratory (APSL), located at Building 5435, Fowler Road Redstone Arsenal. The PXA Signal Analyzer module shall include the following specifications or equivalent (if not brand name): N9030B PXA Signal Analyzer 1 N9030B-550 Frequency Range, 2 Hz to 50 GHz N9030B-P50 Preamplifier, 50 GHz N9030B-B2X Analysis bandwidth, 255 MHz N9030B-LNP Low noise path N9030B-MPB Microwave preselector bypass N9030B-EP0 Enhanced phase noise, DDS LO N9030B-FBP Full Bypass Path N9030B-107 Audio input and digitizer N9091EM0E Measuring Receiver Application 12 months, Node-locked Node-locked perpetual license R-50C-017-3-D Accredited Calibration - Return-to Keysight - 3 years N9030B-YAV Screen video, log video and linear video N9063EM0E Analog Demodulation Measurement Application ------------------------------------------------------------------------------------------------------------------ Responses: Interested parties are requested to respond to this RFI with the following: 1. Full company name. 2. Identify business size 3. Identify Socio-economic status as applicable. 4. Include Point of Contacts (POCs): name, position, office and mobile telephone numbers and email address. 5. Cage Code 6.Unique Entity Identifier (UEI) The response date for this market research is 27 June 2025. No phone calls will be accepted. All responses to this RFI may be submitted via e-mail to the following POCs: Shalanda McMurry, Contracting Officer, at shalanda.r.mcmurry.civ@army.mil & Contract Specialist: Ben Hymas at Benjamin.c.hymas.civ@army.mil.