Inactive
Notice ID:PANRSA-20-P-0000014138
AMENDMENT 02 Respond Date has changed from 03 July 2020 to 10 July 2020 Subject: Request for Information (RFI) Date: 02 July 2020 Project Name: Aviation Ground Power Unit (AGPU) Generator Notice ID: P...
AMENDMENT 02 Respond Date has changed from 03 July 2020 to 10 July 2020 Subject: Request for Information (RFI) Date: 02 July 2020 Project Name: Aviation Ground Power Unit (AGPU) Generator Notice ID: PANRSA-20-P-0000014138 Owner: Program Executive Office Aviation, Project Manager Aviation Mission Systems and Architecture, Product Director Aviation Ground Support Equipment, Redstone Arsenal, 35898 *Changes have been indicated in RED Sector Federal NAICS Code: 335312 - Motor and Generator Manufacturing Classification Code: 61 Electric Wire, and Power and Distribution Equipment Contracting Office: US Army Contracting Command (Aviation), ATTN: CCAM-AU-C, Building 5309, Martin Road, Redstone Arsenal, AL 35898-5280 INTRODUCTION: The Aviation Ground Support Equipment Product Management Office (AGSE PM) located at Redstone Arsenal, Alabama is the Army’s acquisition manager for Aviation Ground Support Equipment. To resolve obsolescence issues, AGSE PM is interested in obtaining information on currently available Aviation Ground Power Unit (AGPU) MEP360-E model generator replacement materiel solutions that can support current and future Army Aviation capability needs. The current Aviation Ground Power Unit (AGPU) provides the following capabilities: AC- 400 HZ, 3 PH, 0.8 PF, 115/200V, 48kVA DC - 28 V at 350 AMPS Hydraulic - 15.2 GPM at 3300 PSIG Pneumatic - 60 LBS/MIN. at 40 PSIG The Government will only consider generators that qualify as form-fit-and-function alternates to the current AGPU generator (part # AGH828-3; NSN 6115-01-471-0888). The vendor’s solution shall integrate with the existing turbine-powered AGPU engine without requiring major modifications to the AGPU. The current AGPU generator is a 400 Hertz, 3 phase 115/200 Volt AC, 0.8 Power Factor, 48kVA, 8000 RPM brushless generator with a round 8” diameter mounting plate with an 8 hole pattern sized for 3/8” studs. DISCLAIMER: This RFI is issued solely for information gathering purposes; this RFI does not constitute a formal solicitation for proposals. In accordance with FAR 15.202(e), responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. The Government will not provide reimbursement for costs incurred in responding to this RFI. No classified information should be included in the RFI response. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted under this RFI.