Inactive Total Small Business Set-Aside (FAR 19.5)

MODIFICATION NOTICE: Bids are being solicited under solicitation number PANMCC22P0000_009286. This announcement constitutes the only solicitation; bids are being requested and a written solicitation w... MODIFICATION NOTICE: Bids are being solicited under solicitation number PANMCC22P0000_009286. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation is issued as a Request for Quote (RFQ), unless otherwise indicated herein.If your company can provide the product/services listed on the solicitation and comply with all of the solicitation instructions, please respond to this notice. To view the specifications, please go to https://marketplace.unisonglobal.com and reference Buy No. 1096188_02. Sources Sought/RFI: Sellers bidding on this opportunity MUST have the items requested on the specified contract. The contract must either be in the Seller's name or the Seller must be able to document its ability to act as an agent of a partner's contract. Sellers may offer Open Market items only in accordance with the approved Terms and Conditions of their respective contract AND approval from the soliciting contracting officer. This requirement is a Small Business Set-Aside and only qualified offerors may submit bids. The solicitation pricing on https://marketplace.unisonglobal.com will start on the date this solicitation is posted, and, unless otherwise displayed at https://marketplace.unisonglobal.com, will end on: 2022-03-24 17:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be in the Statement of Work. The MICC Joint Base Lewis McChord requires the following items, Meet or Exceed, to the following: LI 001: Provide and install DAQ access control at building 3025 on JBLM to include four (4) access control portals at building 3025. The portals must connect through the existing ICIDS RADC’s installed near each portal. All access portals must be IAW ICD/ICS 705, Version 1.5 Seller's responsibility is to provide and install all materials, equipment, and hardware in order to ensure all badge readers are fully operational. Seller/installer/integrator will have experience working with the current security system of building 3025. See attached PWS with Exhibits., 1, JOB; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at https://marketplace.unisonglobal.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC Joint Base Lewis McChord intends to document bids online to be facilitated by the third-party Marketplace, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to document pricing. Offerors may submit bids during the specified period of time. MICC Joint Base Lewis McChord is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Sellers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at https://marketplace.unisonglobal.com. There is no cost to register, review procurement data or make a bid on https://marketplace.unisonglobal.com.Sellers that are not currently registered to use https://marketplace.unisonglobal.com should proceed to https://marketplace.unisonglobal.com to complete their free registration. Sellers that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Sellers may not artificially manipulate the price of a transaction on https://marketplace.unisonglobal.com by any means. It is unacceptable to place bad faith bids, to use decoys in the https://marketplace.unisonglobal.com process or to collude with the intent or effect of hampering the competitive https://marketplace.unisonglobal.com process.Should Sellers require additional clarification, contact Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com. Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. All access portals must be IAW ICD/ICS 705, Version 1.5 Seller's responsibility is to provide and install all materials, equipment, and hardware in order to ensure all badge readers are fully operational. Seller must be able to complete work on Joint Base Lewis McChord, WA. Also see requirements laid out in Section 3 of PWS. The contractor shall not hire any individual to perform work on Joint Base Lewis-McChord or any other Government installation under this contract unless such individual is a citizen of the United States or is lawfully admitted into the United States and authorized to work in the United States. The contractor shall comply with 8 USC 1324a, 8 CFR Part 274a, and any other laws and regulations pertaining to the employment of aliens. The contractor shall, upon request by the Contracting Officer, present documentary evidence acceptable to the Contracting Officer that the employee(s) named or identified in the request is a citizen of the United States or is lawfully admitted into the United States and authorized to work in the United States. Such documentation shall be presented to the Contracting Officer within three (3) working days after the contractor's receipt of the request for documentation. If acceptable documentary evidence is not provided within the required time, the contractor shall not allow the affected employee(s) to perform work on Fort Joint Base Lewis-McChord or any other Government installation under this contract until after such acceptable documentary evidence is presented to the Contracting Officer. Removal of any employee(s) from performance of work pursuant to this provision shall not relieve the contractor of the responsibility to perform all work under this contract in a timely manner. New equipment/parts only. No remanufactured products. The contract price includes all applicable Federal, state, and local taxes and duties. Procedures for commercial vehicle access to military installations are varied. To enter the installation, the Contractor should thoroughly comply with the access procedures of a respective installation. The Contractor shall ensure that its drivers, including drivers of subcontractors at any tier, comply with the access procedures enforced by each military installation. The Contractor shall completely coordinate with the military installations and the delivery point of contacts. The contractor shall stamp or mark the supplies delivered or otherwise furnish notice with the supplies of the existence of a warranty. Markings shall include (i) a brief statement that a warranty exists, (ii) the substance of the warranty, (iii) its duration, and (iv) whom to notify if the supplies are found to be defective. THE FOLLOWING INFORMATION IS PROVIDED TO ASSIST YOU, AND WILL HELP TO EXPEDITE PAPERWORK AND PAYMENT. a. Only one delivery will be accepted against each line item. Backorders will NOT be accepted on individual line items. b. Deliver on or before date specified. Deliveries will be accepted Monday through Friday (except Holidays) from 7:30 A.M. to 2:30 P.M. to Block 15 of the Purchase Order. Notify the individual in Block 16 of any delay encountered (due to strikes, factory backorders, etc.) and give revised delivery date if possible. c. Mark outside of all cartons. Put packing list inside cartons. Show the order number assigned, the PR number shown at the end of each item, and the quantity shipped. All items will be identified by the part number by attached tag and/or stamped identification. d. On direct shipments, have the supplier or manufacturer cite our order number on packages. This eliminates delay caused by trying to determine the firm awarded the original order. Unless otherwise specified in this contract, the contractor shall obtain any necessary licenses and permits, give all notices, and comply with any applicable Federal, State, County, and municipal laws, codes, and regulations in connection with this award. The contractor shall not make news releases or otherwise provide information relative to the performance of this contract or information relative to any incident occurring on JBLM without prior approval of the Contracting Officer. Acquisition of commercial information technology equipment/supplies shall comply with the current version U.S. Army Net Command’s of ASC Technical Authority (TA) Implementation Memorandum. In accordance with FAR 19.102(b), the small business size standard is applied by classifying the product or service being acquired in the industry whose definition, as found NAICS Manual, best describes the principal nature of the product or service being acquired. The NAICS code selected for this acquisition is (561621, Security Systems Services (except Locksmiths)) with an applicable small business size standard of ($22.0m). Questions concerning this solicitation must be submitted by Wednesday March 23rd NLT 1100 EST to reasonably expect a response from the Government. Those questions not received within the proscribed date may not be considered.